Sensors-Manufacturing-Monitoring

  1. C. Ok, P. Mitra, S. Lee, and S. Kumara. 2009. “Distributed energy balanced routing for wireless sensor networks,” Computers & Industrial Engineering. 57(1) 125-135. LINK TO PAPER
  2. Ding, Y, Elsayed, E., Kumara, S. R. T., Lu, J-C., Niu, F., and Shi, J. 2006. Distributed Sensing for Quality and Productivity Improvements. IEEE Transactions on Automation Science and Engineering, 3(4), 344-358. LINK TO PAPER
  3. Bukkapatnam, S., Satish, T. S., Kumara, S. R. T., Lakhatakia, A., Srinivasan, P. 2002. The Neighborhood Method and its Coupling with the Wavelet Method for Signal Separation of Chaotic Signals. Signal Processing 82(10):1351-1374. LINK TO PAPER
  4. Tse P., Qu L., and Kumara S. 2001. An Effective and Portable Electronic Ear for Fault Diagnosis Using Machine Operating Sound Directly. International Journal of Acoustics and Vibration, an affiliated Journal of the Institute of Acoustics and Vibration (IIAV). 6(1): 23-31.
  5. Kamarthi, S.V., Kumara, S., and Cohen, P.H. 2000. Flank wear estimation in turning through wavelet representation of acoustic emission signals. ASME Journal of Manufacturing Sciences and Engineering., 12(1), 12-19. LINK TO PAPER
  6. Kim, T., and S. Kumara. 2000. Surface Defects Analysis Using Neural Networks. International Journal of Industrial Engineering: With Applications.
  7. Bukkapatnam, S., S. Kumara and A.L. Lakhtakia. 2000. Fractal Estimation of Flank Wear in Turning. Journal of Dynamic Systems, Measurement, and Control. 122:89-94. LINK TO PAPER
  8. Bukkapatnam, S., S.Kumara, and A. Lakhtakia. 1999. Analysis of Acoustic Emission Signals in Machining. ASME Transactions in Manufacturing Science and Engineering. 121:568-576. LINK TO PAPER
  9. Bukkapatnam, S., S. Kumara and A.L. Lakhtakia. 1999. Local Eigen function based suboptimal wavelet packet representation of contaminated chaotic signals. IMA Journal of Applied Mathematics. 1-23. LINK TO PAPER
  10. Suh, J., S. Kumara., and Mysore, S.,. 1999. Machinery fault diagnosis and prognosis: applications of advanced signal processing techniques. Annals of the International Institution for Production Engineering Research 48(1): 317-321. LINK TO PAPER
  11. Chen, Y., and S. Kumara. 1998. Fuzzy Logic and Neural Networks for Design of Process Parameters: A Grinding Process Application. 36(2) 395-415 International Journal of Production Research. LINK TO PAPER
  12. Teti, R., and S. Kumara. 1997. A Review of Computational Methods in Manufacturing. Annals of the International Institution for Production Engineering Research (Annals of CIRP: Vol 2).
  13. Kim, T., and S. Kumara. 1997. Boundary Defect Recognition Using Neural Networks. International Journal of Production Research. 35(9):2397-2412. LINK TO PAPER
  14. Bukkapatnam, S., A. Lakhtakia, and S. Kumara. 1997. Chaotic Neurons for On-line Quality Control in Manufacturing. International Journal of Advanced Manufacturing Technology. 13:95-100. LINK TO PAPER
  15. Bukkapatnam, S., A. Lakhtakia, and S. Kumara. 1996. Conceptualization of Chaos Theory Based Optimal Cutting Tool Chatter Control. Speculations in Science and Technology. 19:137-148.
  16. Kumara, S., and J. Lee. 1995. Intelligent Integrated Diagnostics: Development of the Diagnostic System for On-Line Quality Control of Powder Injection Molding. Annals of the International Institution for Production Engineering Research (Annals of CIRP). 44(1):393-398. LINK TO PAPER
  17. Wang, C., D. Cannon, S. Kumara, and G. Lu. 1995. Surface Flaw Identification Using Skeleton Pixel Counts as Inputs to Neural Network. IEEE Transactions on Neural Networks. 6(5):1201-1211. LINK TO PAPER
  18. Bukkapatnam, S., A. Lakhtakia, and S. Kumara. 1995. Analysis of Sensor Signals Shows Turning on a Lathe is Chaotic. Physics Reviews E. 52(3):2375-2387. LINK TO PAPER
  19. Bukkapatnam, S., S. Kumara, and A. Lakhtakia. 1995. Dependence of Computed Trajectory on Step-Size in Nonlinear Dynamic Systems: An Investigation into Cutting Tool Dynamics. IIE Transactions. 27:519-529. LINK TO PAPER
  20. Kim, T., S. Kumara, Y. Chen, and E. Watson. 1994. Computerized Manufacturing: Operations Methods and Standardization for Shop Floor Shearing Operations. International Journal of Industrial Engineering Applications and Practice. 1(1):77-86.
  21. Shin, Y., Y. Chen, and S. Kumara. 1992. Framework of an Intelligent Grinding Process Advisor. Journal of Intelligent Manufacturing. 3:135-148. LINK TO PAPER
  22. Kumara, S., L. Qu, J. Lee, P. Hicks, and I. Ham. 1990. AI Based Diagnostics in Sensor-Based Machine Tool Control. Journal of Wave and Material Technology. 4(1-3):223-238.