Publications
Faculty and student members of the Made By Design Lab have written numerous journal publications, book chapters, and theses surrounding the field of AM. The lab also regularly presents research updates at national and international academic conferences. Below is a comprehensive list of publications written by members of the lab.
Book Chapters
Journal Articles
Conference Papers
Theses & Dissertations
Book Chapters
— 2017 —
Williams, C. B., & Meisel, N. A. (2017). Designing for Material Jetting Additive Processes. In LaRoux K. Gillespie (Ed.), Design for Manufacturability: New Materials, Technologies, and Processes. New York City, New York: McGraw-Hill.
Journal Articles
— 2022 —
Mathur, J., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2022). Effects Of Immersion on Knowledge Gain and Cognitive Load In Additive Manufacturing Process Education. 3D Printing and Additive Manufacturing.
Kaweesa, D. V., Bobbio, L. D., Beese, A. M., & Meisel, N. A. (2022). Prediction and Validation of Composite Properties Resulting from Voxel-Based Microstructural Design in Material Jetting. Rapid Prototyping Journal.
Prabhu, R., Simpson, T. W., Miller, S. R., Cutler, S. L., & Meisel, N. A. (2022). Teaching Design for Additive Manufacturing: Formulating Educational Interventions that Encourage Design Creativity. 3D Printing and Additive Manufacturing.
Williams, G., Meisel, N. A., Simpson, T. W., & McComb, C. (2022). Design for Artificial Intelligence: Proposing a Conceptual Framework Grounded in Data Wrangling. ASME Journal of Computing and Information Science in Engineering, 22(6),060903.
Prabhu, R., Simpson, T. W., Miller, S. R., & Meisel, N. A. (2022). Development and Validity Evidence Investigation of a Design for Additive Manufacturing Self-Efficacy Scale. Research in Engineering Design, 33, 437-453.
Prabhu, R., Simpson, T. W., Miller, S. R., & Meisel, N. A. (2022). Mastering Manufacturing: Exploring Effects of Engineering Designers’ Prior Experience on Design for Additive Manufacturing Use. Journal of Engineering Design, 33(5), 366-387.
Ashrafi, N., Nazarian, S., Meisel, N. A., & Duarte, J. (2022). A Grammar-Based Algorithm for Toolpath Generation: Compensating for Material Deformation in the Additive Manufacturing of Concrete, Additive Manufacturing, 55, 102803.
Meisel, N. A., Watson, N., Bilen, S., Duarte, J. & Nazarian, S. (2022). Design and System Considerations for Construction-Scale Concrete Additive Manufacturing in Remote Environments via Robotic Arm Deposition. 3D Printing and Additive Manufacturing, 9(1), 35-45.
Prabhu, R., Berthel, J. T., Masia, J. S., Meisel, N. A., & Simpson, T. W. (2022). Rapid Response! Investigating the Effects of Problem Requirements on the Characteristics of Additively Manufactured Solutions for COVID-19. ASME Journal of Mechanical Design, 144(5), 054502.
— 2021 —
Ashrafi, N., Nazarian, S., Meisel, N. A., & Duarte, J. (2021). Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete, Additive Manufacturing, 47, 102228.
Sinha, S., Lynch, S., & Meisel, N. A. (2021). Heat Transfer Simulation of Material Extrusion Additive Manufacturing to Predict Weld Strength between Layers. Additive Manufacturing, 46, 102117.
Prabhu, R., Berthel, J. T., Masia, J. S., Meisel, N. A., & Simpson, T. W. (2021). Maximizing Design Potential: Investigating the Effects of Utilizing Opportunistic and Restrictive Design for Additive Manufacturing in Rapid Response Solutions. Rapid Prototyping Journal, 27(6), 1161-1171.
Prabhu, R., Leguarda, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2021). Favoring Complexity: A Mixed Methods Exploration of Factors that Influence Concept Selection when Designing for Additive Manufacturing. ASME Journal of Mechanical Design, 143(10), 102001.
Prabhu, R., Masia, J. S., Berthel, J. T., Meisel, N. A., Simpson, T. W. (2021). Design and Manufacturability Data on Additively Manufactured Solutions for COVID-19. Data in Brief, 36, 107012.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2021). Fresh in My Mind! Investigating the Effects of the Order of Presenting Opportunistic and Restrictive Design for Additive Manufacturing Content on Students’ Creativity. Journal of Engineering Design, 32(4), 187-212.
Jordan, A., Knochel, A., Meisel, N. A., Reiger, K., Sinha, S. (2021). Making on the Move: Mobility, Makerspaces, and Transdisciplinary Art Education. The International Journal of Art and Design Education, 40(1), 52-65.
Ashrafi, N., Nazarian, S., Meisel, N. A., & Duarte, J. (2021). Experimental Prediction of Material Deformation in Large-Scale Additive Manufacturing of Concrete. Additive Manufacturing, 37, 101656.
— 2020 —
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2020). Built to Win? Exploring the Role of Competitive Environments on Students’ Creativity in Design for Additive Manufacturing Tasks. Journal of Engineering Design, 31(12), 574-604.
Hu, H., Sinha, S., Meisel, N. A., & Bilen, S. (2020). Permittivity of 3D-Printed Nylon Substrates with Different Infill Pattern and Density for Design of Microwave Components. Designs, 4(3), 39.
Prabhu, R., Bracken, J., Armstrong, C., Jablokow, K., Simpson, T., & Meisel, N. A. (2020). Additive Creativity: Investigating the Use of Design for Additive Manufacturing to Encourage Creativity in the Engineering Design Industry. International Journal of Design Creativity and Innovation, 8(4), 198-222.
Sinha, S., Rieger, K., Knochel, A., & Meisel, N. A. (2020). Mobile Making Platform for 3D Printing Education: Evaluating the Impact of Key Session Variables on Student Awareness and Engagement. International Journal of Engineering Education, 36(4): 1-17.
Sinha, S., & Meisel, N. A. (2020). Predicting Material Properties for Embedded Structures Created with Polymer Material Extrusion Additive Manufacturing. Additive Manufacturing, 34, 101247.
Malviya, M., Sinha, S., Berdanier, C., & Meisel, N. A. (2020). Digital Design Automation to Support In-Situ Embedding of Functional Objects in Additive Manufacturing. ASME Journal of Mechanical Design, 142(11), 114501.
Bracken, J., Pomorski, T., Armstrong, C., Prabhu, R., Simpson, T., Jablokow, K., Cleary, W., & Meisel, N. A. (2020). Design for Metal Powder Bed Fusion: The Geometry for Additive Part Selection (GAPS) Worksheet. Additive Manufacturing, 35, 101163.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2020). But Will It Build? Assessing the Use of Design for Additive Manufacturing in Engineering Design Outcomes with Novice Designers. ASME Journal of Mechanical Design, 142(9), 092001.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2020). Teaching Design Freedom: Understanding the Effects of Variations in Design for Additive Manufacturing Education on Students’ Creativity. ASME Journal of Mechanical Design, 142(9), 094501.
Ostrander, J., Tucker, C. S., Simpson, T. W., & Meisel, N. A. (2020). Evaluating the Use of Virtual Reality to Teach Introductory Concepts of Additive Manufacturing. ASME Journal of Mechanical Design, 142(5), 051702.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2020). Exploring the Effects of Additive Manufacturing Education on Students’ Engineering Design Process and its Outcomes. ASME Journal of Mechanical Design, 142(4), 042001.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2020). Complex Solutions for Complex Problems? Exploring the Effects of Task Complexity on Student Use of Design for Additive Manufacturing. ASME Journal of Mechanical Design, 142(3), 032302.
— 2019 —
Williams, G., Meisel, N. A., Simpson, T.W., & McComb, C. C. (2019). Design Repository Effectiveness for 3D Convolutional Neural Networks: Application to Additive Manufacturing. ASME Journal of Mechanical Design, 141(11), 111701.
Ashrafi, N., Duarte, J., Nazarian, S., & Meisel, N. A. (2019). Evaluating the Relationship Between Deposition and Layer Quality in Large-Scale Additive Manufacturing of Concrete. Virtual and Physical Prototyping, 14(2), 135-140
Mahan, T., Meisel, N. A., McComb, C., & Menold, J. (2019). Pulling at the Digital Thread: Exploring the Tolerance Stack Up Between Automatic Procedures and Expert Strategies in Scan to Print Processes. ASME Journal of Mechanical Design, 141(2), 021701.
— 2018 —
Sinha, S., & Meisel, N. A. (2018). Influence of Process Interruption on Mechanical Properties of Material Extrusion Parts. Rapid Prototyping Journal, 24(5), 821-827.
Meisel, N. A., Dillard, D., & Williams, C. B. (2018). Impact of Material Concentration and Distribution on Composite Parts Manufactured via Multi-Material Jetting. Rapid Prototyping Journal, 24(5), 872-879.
Kaweesa, D. V., & Meisel, N. A. (2018). “Quantifying Fatigue Property Changes in Material Jetted Parts Due to Functionally Graded Material Interface Design.” Additive Manufacturing, 21, 141-149.
Stoner, B., Bartolai, J., Kaweesa, D. V., Meisel, N. A., Simpson, T. W. (2018). “Achieving Functionally Graded Material Composition Through Bicontinuous Mesostructural Geometry in Material Extrusion Additive Manufacturing.” JOM: The Journal of The Minerals, Metals & Materials Society, 70(3), 413-418.
— 2017 —
Meisel, N. A., Woods, M. R., Simpson, T. W., & Dickman, C. J. (2017). “Redesigning a Reaction Control Thruster for Metal-Based Additive Manufacturing: A Case Study in Design for Additive Manufacturing.” ASME Journal of Mechanical Design, 139(10), 100903.
Gao, H., Kaweesa, D. V., Moore, J. P., & Meisel, N. A. (2017). “Investigating the Impact of Acetone Vapor Smoothing on the Strength and Elongation of Printed ABS Parts.” JOM: The Journal of The Minerals, Metals & Materials Society, 69(3), 580–585.
— 2016 —
Bass, L., Meisel, N. A., & Williams, C. B. (2016). “Exploring Variability of Orientation and Aging Effects in Material Properties of Multi-Material Jetting Parts.” Rapid Prototyping Journal, 22(5), 826-834.
Meisel, N. A., Williams, C. B., Ellis, K., & Taylor, G. D. (2016). “Decision Support for Additive Manufacturing Deployment in Remote or Austere Environments.” Journal of Manufacturing Technology Management, 27(7), 898-914.
— 2015 —
Meisel, N. A., & Williams, C. B. (2015). “An Investigation of Key Design for Additive Manufacturing Constraints in Multi-Material 3D Printing.” ASME Journal of Mechanical Design, 137(11), 1-9.
Meisel, N. A., & Williams, C. B. (2015). “Design and Assessment of a 3D Printing Vending Machine.” Rapid Prototyping Journal, 21(5), 471-481.
Meisel, N. A., Elliott, A. M., & Williams, C. B. (2015). “A Procedure for Creating Actuated Joints via Embedding Shape Memory Alloys in PolyJet 3D Printing.” Journal of Intelligent Material Systems and Structures, 26(12), 1498-1512.
Snelling, D., Li, Q., Meisel, N. A., Williams, C. B., Batra, R., & Druschitz, A. (2015). “Lightweight Metal Cellular Structures Fabricated via 3D Printing of Sand Cast Molds.” Advanced Engineering Materials, 17(7), 923-932.
— 2014 —
Gaynor, A. T., Meisel, N. A., Williams, C. B., & Guest, J. K. (2014). “Multiple-Material Topology Optimization of Compliant Mechanisms Created Via PolyJet Three-Dimensional Printing.” ASME Journal of Manufacturing Science and Engineering, 136(6), 061015.
Conference Papers
— 2022 —
Williams, G., Meisel, N. A., Simpson, T. W., & McComb, C. (2022) “Analyzing Expert Design Cost Estimation for Additive Manufacturing.” ASME 2022 International Design Engineering Technical Conferences, In Press.
Mathur, J., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2022) “Identifying the Effects of Immersion on Design for Additive Manufacturing Evaluation of Designs of Varying Manufacturability.” ASME 2022 International Design Engineering Technical Conferences, In Press.
Pearl, S. & Meisel, N. A. (2022) “Assessing the Manufacturability of Students’ Early-Stage Designs Based on Previous Experience with Traditional Manufacturing and Additive Manufacturing.” ASME 2022 International Design Engineering Technical Conferences, In Press.
Cayley, A., Mathur, J., & Meisel, N. A. (2022) “Toward a Comprehensive Framework for Preliminary Design Evaluation in Additive Manufacturing.” ASME 2022 International Design Engineering Technical Conferences, In Press.
Baldwin, M., Meisel, N. A., & McComb, C. (2022) “A Data Driven Approach for Multi-Topology Lattice Transitions.” Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, In Press.
— 2021 —
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2021) “Break It Down: Comparing the Effects of Lecture- and Module-Style Design for Additive Manufacturing Educational Interventions on Students’ Learning and Creativity.” ASME 2021 International Design Engineering Technical Conferences, DETC2021-71702.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2021) “Mastering Manufacturing: Exploring the Influence of Engineering Designers’ Prior Experience When Using Design for Additive Manufacturing.” ASME 2021 International Design Engineering Technical Conferences, DETC2021-71686.
Mathur, J., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2021) “Analysis of the Knowledge Gain and Cognitive Load Experienced Due to the Computer-Aided Instruction of Additive Manufacturing Processes.” ASME 2021 International Design Engineering Technical Conferences, DETC2021-71667.
Pierce, J., Williams, G., Meisel, N. A., Simpson, T. W., & McComb, C. (2021) “Stochastically-Trained Physics-Informed Neural Networks: Application to Thermal Analysis in Metal Laser Powder Bed Fusion.” ASME 2021 International Design Engineering Technical Conferences, DETC2021-70557.
— 2020 —
Mathur, J., Basu, S., Menold, J. D., & Meisel, N. A. (2020) “Quality Assessment of Additively Manufactured Fiducial Markers to Support Augmented Reality-Based Part Inspection.” ASME International Design Engineering Technical Conferences, DETC2020-22172.
Williams, G., Meisel, N. A., Simpson, T. W., & McComb, C. (2020) “Deriving and Assessing Metamodels to Predict Machine Learning Quality in the Context of Additive Manufacturing.” ASME International Design Engineering Technical Conferences, DETC2020-22518.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2020) “Fresh in My Mind! Investigating the Effects of the Order of Presenting Opportunistic and Restrictive Design for Additive Manufacturing Content on Creativity.” ASME International Design Engineering Technical Conferences, DETC2020-22449.
Prabhu, R., Leguarda, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2020) “Favoring Complexity: A Mixed Methods Exploration of Factors that Influence Concept Selection in Design for Additive Manufacturing,” ASME International Design Engineering Technical Conferences, DETC2020-22447.
— 2019 —
Watson, N., Meisel, N. A., Bilen, S., Duarte, J. & Nazarian, S. (2019) “Large-scale Additive Manufacturing of Concrete Using a Six-axis Robotic Arm for Autonomous Habitat Construction.” Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium, 1583-1595.
Shepherd, J., & Meisel, N. A. (2019) “Large-scale Identification of Parts Suitable for Additive Manufacturing: An Industry Perspective.” Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium, 33-44.
Bracken, J., Meyer, J., Bentley, Z., Miller, E., Jablokow, K., Simpson, T., & Meisel, N. A. (2019) “Investigating the Gap Between Research and Practice in Additive Manufacturing.” Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium, 80-96.
Sinha, S., & Meisel, N. A. (2019) “Impact of Embedding Cavity Design on Thermal History between Layers in Polymer Material Extrusion Additive Manufacturing.” Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium, 1778-1792.
Williams, G., Mezghani, A., Eachus, M., O’Brien, J., McComb, C., & Meisel, N. A. (2019). “A Standardized Framework for Communicating and Modelling Parametrically Defined Mesostructure Patterns.” Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium, 1136-1150.
Meisel, N. A., Ritter, S. C., McComb, C. C., & Menold, J. D. (2019). “Creation and Implementation of a Project Framework to Improve Cornerstone Engineering Design.” 11th Annual ASEE First Year Engineering Education Conference.
Meisel, N. A. & Ritter, S. C. (2019). “A Flexible, Portable Making Solution to Enable Hands-On Learning with Additive Manufacturing in Cornerstone Engineering Design.” 11th Annual ASEE First Year Engineering Education Conference.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2019). “Complex Solutions for Complex Problems? Exploring the Effects of Task Complexity on Student use of Design for Additive Manufacturing.” ASME 2019 International Design Engineering Technical Conferences, DETC2019-97474.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2019). “But Will it Print? Assessing Student Use of Design for Additive Manufacturing and Exploring its Effect on Design Performance.” ASME 2019 International Design Engineering Technical Conferences, DETC2019-97478.
Ostrander, J., Ryan, L., Dhengre, S., McComb, C. C., Simpson, T.W., & Meisel, N. A. (2019). “A Comparative Study of Virtual Reality and Computer-Aided Design to Evaluate Parts for Additive Manufacturing.” ASME 2019 International Design Engineering Technical Conferences, DETC2019-97480.
Malviya, M., Sinha, S., & Meisel, N. A. (2019). “Digital Design Automation to Support In-Situ Embedding of Functional Components in Additive Manufacturing.” ASME 2019 International Design Engineering Technical Conferences, DETC2019-97607.
Kaweesa, D., McComb, C. C., Menold, J. D., Ritter, S., & Meisel, N. A. (2019). “Evaluating Idea Quantity and Variety When Using Digital Collaboration Tools to Support Brainstorming in Non-Collocated Teams.” ASME 2019 International Design Engineering Technical Conferences, DETC2019-98203.
— 2018 —
Kaweesa, D., & Meisel, N. A. (2018). “Material Property Changes in Custom-Designed Digital Composite Structures Due to Voxel Size.” Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium, 1499-1510.
Murphy, C., Meisel, N. A., Simpson, T. W., & McComb, C. (2018). Predicting Part Mass, Required Support Material, and Build Time via Autoencoded Voxel Patterns.” Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium, 1660-1674.
Sinha, S., & Meisel. N. A. (2018). “Quantifying the Effect of Embedded Component Orientation on Flexural Properties in Additively Manufactured Structures.” Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium, 1511-1525.
Kaweesa, D. V., & Meisel, N. A. (2018). “Material Property Changes in Custom-Designed Digital Composite Structures Due to Voxel Size.” Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium, 1499-1510.
Spillane, D. R., & Meisel, N. A. (2018). “A Voxel-Based Design Approach for Creating Functionally Graded Structures via Material Extrusion Additive Manufacturing.” ASME 2018 International Design Engineering Technical Conferences, DETC2018-85618.
Ostrander, J. K., Tucker, C. S., Simpson, T. W., & Meisel, N. A. (2018). “Evaluating the Effectiveness of Virtual Reality as an Interactive Educational Resource for Additive Manufacturing.” ASME 2018 International Design Engineering Technical Conferences, DETC2018-86036.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2018). “The Earlier the Better? Investigating the Importance of Timing on Effectiveness of Design for Additive Manufacturing Education.” ASME 2018 International Design Engineering Technical Conferences, DETC2018-85953.
Prabhu, R., Miller, S. R., Simpson, T. W., & Meisel, N. A. (2018). “Teaching Design Freedom: Exploring the Effects of Design for Additive Manufacturing Education on the Cognitive Components of Students’ Creativity.” ASME 2018 International Design Engineering Technical Conferences, DETC2018-85938.
Mahan, T., Doyle, B., Meisel, N. A., & Menold, J. (2018). “Pulling at the Digital Thread: Exploring the Tolerance Stack Up in Scan to Print Processes.” ASME 2018 International Design Engineering Technical Conferences, DETC2018-85844.
— 2017 —
Tanney, D., Meisel, N. A., & Moore, J. (2017). “Investigating Material Degradation through the Recycling of PLA in Additively Manufactured Parts.” Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium, 519-531.
Kaweesa, D. V., Spillane, D. R., & Meisel, N. A. (2017). “Investigating the Impact of Functionally Graded Materials on Fatigue Life of Material Jetted Specimens.” Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium, 578-592.
Sinha, S., Rieger, K., Knochel, A. D., & Meisel, N. A. (2017). “Design and Preliminary Evaluation of a Deployable Mobile Makerspace for Informal Additive Manufacturing Education.” Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium, 2801-2815.
Gao, H., & Meisel, N. A. (2017). “Exploring the Manufacturability and Resistivity of Conductive Filament Used in Material Extrusion Additive Manufacturing.” Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium, 1612-1626.
Sinha, S., Chen, H., Meisel, N. A., & Miller, S. R. (2017). “Does Designing for Additive Manufacturing Help Us Be More Creative? An Exploration in Engineering Design Education.” ASME 2017 International Design Engineering Technical Conferences, DETC2017-68274.
— 2016 —
Sinha, S., & Meisel, N. A. (2016). “Influence of Embedding Process on Mechanical Properties of Material Extrusion Parts.” Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium, 847-863.
Woods, M. R., Meisel, N. A., Simpson, T. W., & Dickman, C. J. (2016). “Redesigning a Reaction Control Thruster for Metal-Based Additive Manufacturing: A Case Study in Design for Additive Manufacturing.” ASME 2016 International Design Engineering Technical Conferences, DETC2016-59722.
— 2015 —
Vu, I., Bass, L. B., Meisel, N. A., Orler, B., Williams, C. B., & Dillard, D. A. (2015). “Characterization of Multi-Material Interfaces in PolyJet Additive Manufacturing.” Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium, 959-982.
Bass, L. B., Meisel, N. A., & Williams, C. B. (2015). “Exploring Variability in Material Properties of Multi-Material PolyJet 3D-Printed Parts.” Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium, 993-1006.
— 2014 —
Meisel, N. A., & Williams, C. B. (2014). “Design for Additive Manufacturing: An Investigation of Key Manufacturing Considerations in Multi-Material PolyJet 3D Printing.” Proceedings of the 25th Annual International Solid Freeform Fabrication Symposium, 746-763.
— 2013 —
Meisel, N.A., & Williams, C.B. (2013). “Design and Assessment of an AM Vending Machine for Student Use.” Proceedings of the 24th Annual International Solid Freeform Fabrication Symposium, 1034-1047.
Meisel, N. A., Gaynor, A. T., Williams, C. B., & Guest, J. K. (2013). “Multiple Material Topology Optimization of Compliant Mechanisms Created Via PolyJet 3D Printing.” Proceedings of the 24th Annual International Solid Freeform Fabrication Symposium, 980-997.
— 2012 —
Meisel, N. A., Williams, C. B., & Druschitz, A. (2012). “Lightweight Metal Cellular Structures via Indirect 3D Printing and Casting.” Proceedings of the 23rd Annual International Solid Freeform Fabrication Symposium, 162-176.
Theses & Dissertations
— 2021 —
Mathur, J. (2021). Novel Visualization Tools to Support Assessment of Additively Manufactured Part Quality. The Pennsylvania State University, M.S. in Engineering Design.
Henneh, D. (2021), Establishing Closed-Loop Control of Additive Construction Technology. The Pennsylvania State University, M.S. in Engineering Design (Co-Advisor: Sven Bilen).
— 2020 —
Ryan, L. (2020). Using Functionally Graded Lattices to Promote Printed Part Adhesion in Silicone Overmolding. The Pennsylvania State University, M.S. in Mechanical Engineering (Co-Advisor: Jessica Menold).
Watson, N. (2020), Concrete Additive Manufacturing System Design for Earth and Mars. The Pennsylvania State University, M.S. in Additive Manufacturing and Design (Co-Advisor: Sven Bilen).
— 2019 —
Ostrander, J. (2019). Using Virtual Reality to Enhance Distance Education for Additive Manufacturing. The Pennsylvania State University, M.S. in Engineering Design.
— 2018 —
Prabhu, R. (2018). Investigating the Effect of Design for Additive Manufacturing Education on Student Design Processes and Creativity. The Pennsylvania State University. M.S. in Engineering Design.
— 2017 —
Kaweesa, D.V. (2017). Quantifying the Impact of Functionally Graded Materials on the Fatigue Life of Material Jetted Specimens. The Pennsylvania State University. M.S. in Mechanical Engineering.
Gao, H. (2017). Exploring the Manufacturability and Resistivity of Conductive Filament Used in Material Extrusion Additive Manufacturing. The Pennsylvania State University. B. S. in Mechanical Engineering.
Sinha, S. (2017). Improving Quality of Multi-Functional Structures Created via Material Extrusion Additive Manufacturing. The Pennsylvania State University. M. S. in Engineering Design.
— 2015 —
Meisel, N. (2015). Design for Additive Manufacturing Considerations for Self-Actuating Compliant Mechanisms Created via Multi-Material PolyJet 3D Printing. Virginia Polytechnic Institute and State University. Ph. D. in Engineering Design.