by etg10 | Dec 11, 2020 | EDSGN-100
Teams in our Section were tasked to take a single amusement park attraction and address a pressing public health concern with the ride’s operation, design, and thematic continuity in light of COVID-19 and other public health concerns. This team addressed the...
by etg10 | Dec 11, 2020 | Electrical Engineering, Energy Engineering, Industrial Engineering, Mechanical Engineering
The objective of this project was to design, build, and test a system for visually inspecting a system of rigid pipes with access points at either end of the pipes, simulating the complicated lubrication passages that exist on aircraft gearboxes. Sponsored By: Boeing...
by etg10 | Dec 11, 2020 | Electrical Engineering, Mechanical Engineering
The objective of this project is to improve the connection process of silicon tubing to a Temporary Immersion Bioreactor and to develop a remote monitoring system for the Temporary Immersion Bioreactors. Sponsored By: PSU Chemical Engineering Department Team Members...
by etg10 | Dec 11, 2020 | EDSGN-100
“Vending machine” that lets users created customized bags made out of recycled PET material. Team Members Melissa Campbell | Jack Gerity | Victoria Penney | Angel Polczynski Instructor: Dr. Elizabeth Starkey Project Video Watch the Project Video Project...
by etg10 | Dec 10, 2020 | Computer Engineering, Electrical Engineering
A 3d printer with a square nozzle requires the use of a 5th motor to rotate the nozzle head for accurate extrusion, the Marlin firmware must be altered to allow for this rotation. Sponsored By: Joe Bartolai Team Members Ian C Smithgall | Delaney Rich | John Anderson |...
