3D Sand-Printing & Metal Casting
- Martinez, D., King, P., Sama, S.R. et al. Effect of freezing range on reducing casting defects through 3D sand-printed mold designs. Int J Adv Manuf Technol (2023). https://doi.org/10.1007/s00170-023-11112-x
-
King, P., Manogharan, G. Novel Experimental Method for Metal Flow Analysis using Open Molds for Sand Casting. Inter Metalcast (2023). https://doi.org/10.1007/s40962-023-00966-2
- Bate, C.; King, P.; Sim, J.; Manogharan, G. A Novel Approach to Visualize Liquid Aluminum Flow to Advance Casting Science. Materials 2023, 16, 756. https://doi.org/10.3390/ma16020756
- Lynch, P., Hasbrouck, C. R., Wilck, J., Kay, M., & Manogharan, G. (2020). Challenges and opportunities to integrate the oldest and newest manufacturing processes: metal casting and additive manufacturing. Rapid Prototyping Journal. https://doi.org/10.1108/RPJ-10-2019-0277
- Martinez, D., Bate, C. & Manogharan, G. (2020). Towards functionally graded sand molds for metal casting: engineering thermo-mechanical properties using 3D sand printing. Vol. 72. JOM. https://doi.org/10.1007/s11837-019-03975-x
- Sama, S., Badamo, T. & Manogharan, G. (2020). Case studies on integrating 3D sand-printing technology into the production portfolio of a sand-casting foundry. International Journal of Metalcasting. Vol. 14(1). https://doi.org/10.1007/s40962-019-00340-1
- Sama, S., MacDonald, E., Voigt, R., & Manogharan, G. (2019). Measurement of metal velocity in sand casting during mold filling. Metals. Vol. 9(10). https://doi.org/10.3390/met9101079
- Wang, J., Sama, S., & Manogharan, G. (2019). Re-thinking design methodology for castings: 3D sand-printing and topology optimization. International Journal of Metalcasting. Vol. 13(1). https://doi.org/10.1007/s40962-018-0229-0
- Wang, J., Sama, S., Lynch, P., & Manogharan, G. (2019). Design and topology optimization of 3D-printed wax patterns for rapid investment casting. Procedia Manufacturing. Vol 34. https://doi.org/10.1016/j.promfg.2019.06.224
- Sama, S. Badamo, T., & Manogharan, G. (2019). Case studies on integrating 3D sand-printing technology into the production portfolio of a sand-casting foundry. International Journal of Metalcasting. Vol. 14. https://doi.org/10.1007/s40962-019-00340-1
- Sama, S. Badamo, T., Lynch, P., & Manogharan, G. (2019). Novel sprue designs in metal casting via 3D sand-printing. Additive Manufacturing. Vol 25. https://doi.org/10.1016/j.addma.2018.12.009
- Sama, S., Wang, J., & Manogharan, G. (2018). Non-conventional mold design for metal casting using 3D sand-printing. Journal of Manufacturing Processes. Vol. 34(B) https://doi.org/10.1016/j.jmapro.2018.03.049
- Wang, J., Sama, S., & Manogharan, G. (2018). Re-thinking design methodology for castings: 3D sand-printing and topology optimization. International Journal of Metalcasting. Vol. 13. https://doi.org/10.1007/s40962-018-0229-0
- Almaghariz, E., Conner, B., Lenner, L., Gullapalli, R., Manogharan, G., Lamoncha, B., & Fang, M. (2016). Quantifying the role of part design complexity in using 3D sand printing for molds and cores. International Journal of Metalcasting. Vol. 10(3). https://doi.org/10.1007/s40962-016-0027-5
Orthopedic Applications of Additive Manufacturing
- Tilton, M.,Borjali, A.,Griffis, J., Varadarajan, K., & Manogharan, G. (2023).Fatigue properties of Ti-6Al-4V TPMS scaffolds fabricated via laser powder bed fusion. Manufacturing Letters, Volume 37, September 2023, Pages 32-38. https://doi.org/10.1016/j.mfglet.2023.06.005
-
Tilton, M., Jacobs, E., Overdorff, R., Astudillo Potes, M., Lu, L., & Manogharan, G. (2023). Biomechanical behavior of PMMA 3D printed biomimetic scaffolds: Effects of physiologically relevant environment. Journal of the Mechanical Behavior of Biomedical Materials, 138, 105612. https://doi.org/https://doi.org/10.1016/j.jmbbm.2022.105612
- Schmidt EC, Judkins LM, Monagharan G, Mehta S, Hast MW. Current concepts in fracture healing: temporal dynamization and applications for additive manufacturing. OTA Int. 2022 Mar 10;5(1 Suppl):e164. doi: 10.1097/OI9.0000000000000164. Erratum in: OTA Int. 2022 Jul 11;5(3): PMID: 35282393; PMCID: PMC8900457.
- Tilton M, Lewis GS, Hast MW, Fox E, Manogharan G (2021) Additively manufactured patient-specific prosthesis for tumor reconstruction: Design, process, and properties. PLOS ONE 16(7): e0253786. https://doi.org/10.1371/journal.pone.0253786
- Tilton, M., Borjali, A., Isaacson, A., Varadarajan, K. M., & Manogharan, G. P. (2021). On structure and mechanics of biomimetic meta-biomaterials fabricated via metal additive manufacturing. Materials & Design. https://doi.org/10.1016/j.matdes.2021.109498
- Tilton, M., Armstrong, A., Wee, H., Hast, M., Manogharan, G., Lewis, G. (2020). Finite Element-Predicted Effects of Screw Configuration in Proximal Humerus Fracture Fixation. Journal of Biomechanical Engineering Vol. 142(8). https://doi.org/10.1115/1.4045907
- Tilton, M., Lewis, G., Wee, H., Armstrong, A., Hast, M., Manogharan, G. (2020). Additive Manufacturing of Fracture Fixation Implants: Design, Material Characterization, Biomechanical Modeling and Experimentation. Additive Manufacturing Vol. 33, 101137. https://doi.org/10.1016/j.addma.2020.101137
- Tilton, M., Armstrong, A., Sanville, J., Chin, M., Hast, M., Lewis, G., & Manogharan, G. (2020). Biomechanical Testing of Additive Manufactured Proximal Humerus Fracture Fixation Plates. Annals of Biomedical Engineering. Vol. 48. https://doi.org/10.1007/s10439-019-02365-3
Hybrid Metal Additive Manufacturing
- Xi Gong , Dongrui Zeng , Willem Groeneveld-Meijer , Guha Manogharan . Additive manufacturing: A machine learning model of process-structure-property linkages for machining behavior of Ti-6Al-4V. MSAM 2022, 1(1), 6. https://doi.org/10.18063/msam.v1i1.6
- Rifat, M.; Basu, S.; De Meter, E.C.; Manogharan, G. Effect of Prior Surface Textures on the Resulting Roughness and Residual Stress during Bead-Blasting of Electron Beam Melted Ti-6Al-4V. Crystals 2022, 12, 374. https://doi.org/10.3390/cryst12030374
- Strong, S., Kay, M., Wakefield, T., Sirichakwal, I., Conner, B., & Manogharan, G. (2019). Rethinking reverse logistics: role of additive manufacturing technology in metal remanufacturing. Journal of Manufacturing Technology Management. https://doi.org/10.1108/JMTM-04-2018-0119
- Strong, D., Kay, M., Conner, B., Wakefield, T., & Manogharan, G. (2019). Hybrid manufacturing – locating AM hubs using a two-stage facility location approach. Additive Manufacturing. Vol 25. https://doi.org/10.1016/j.addma.2018.11.027
- Strong, D., Kay, M., Wakefield, T., Sirichakwal, I., Conner, B., & Manogharan, G. (2018). Adopting additive-hybrid manufacturing: the role of capacity in implementation decision. International Journal of Rapid Manufacturing. Vol 7(4). https://doi.org/10.1504/IJRAPIDM.2018.095795
- Tripathi, V., Armstrong, A., Gong, X., Manogharan, G., Simpson, T., & De Meter, E. (2018). Milling of Inconel 718 block supports fabricated using laser powder bed fusion. Journal of Manufacturing Processes. Vol. 34(B). https://doi.org/10.1016/j.jmapro.2018.03.046
- Strong, D., Kay, M., Conner, B., Wakefield, T., & Manogharan, G. (2018). Hybrid manufacturing–integrating traditional manufacturers with additive manufacturing (AM) supply chain. Additive Manufacturing. Vol. 21. https://doi.org/10.1016/j.addma.2018.03.010
- Iquebal, A., El Amri, S., Shrestha, S., Wang, Z., Manogharan, G., & Bukkapatnam, S. (2017). Longitudinal milling and fine abrasive finishing operations to improve surface integrity of metal AM components. Procedia Manufacturing. Vol. 10. https://doi.org/10.1016/j.promfg.2017.07.090
- Strong, D., Sirichakwal, I., Manogharan, G., & Wakefield, T. (2016). Current state and potential of additive – hybrid manufacturing for metal parts. Rapid Prototyping Journal. Vol 23(3). https://doi.org/10.1108/RPJ-04-2016-0065
- Manogharan, G., Wysk, R., Harrysson, O. (2016). Additive manufacturing–integrated hybrid manufacturing and subtractive processes: economic model and analysis. International Journal of Computer Integrated Manufacturing. Vol. 29(5). https://doi.org/10.1080/0951192X.2015.1067920
- Manogharan, G., Wysk, R., Harrysson, O., & Aman, R. (2015). AIMS–A metal additive-hybrid manufacturing system: system architecture and attributes. Procedia Manufacturing. Vol. 1. https://doi.org/10.1016/j.promfg.2015.09.021
Additive Manufacturing Materials & Processing
- Clares, P., Manogharan, G., Thomas, L., & Krzeminski, D. (2023) Design-property decision-making in polymer lattices when controlling for printed mass. Sports Engineering, 26, 28. http://dx.doi.org/10.1007/s12283-023-00418-4
-
Clares, P., Gao, Y., Stebbins, R., van Duin, A., & Manogharan, G. (2022). Increasing density and mechanical performance of binder jetting processing through bimodal particle size distribution. Materials Science in Additive Manufacturing, 1, 20. https://doi.org/10.18063/msam.v1i3.20
-
Chen, R., Baich, L., Lauer, J., Senesky, D. G., & Manogharan, G. (2022). Effects of Part Orientation, Printer Selection, and Infill Density on Mechanical Properties and Production Cost of 3D Printed Flexural Specimens. Manufacturing Letters, 33, 549–560. https://doi.org/https://doi.org/10.1016/j.mfglet.2022.07.069
-
Gao, Y., Clares, A. P., Manogharan, G., & van Duin, Adri. C. T. (2022). A reactive molecular dynamics study of bi-modal particle size distribution in binder-jetting additive manufacturing using stainless-steel powders. Phys. Chem. Chem. Phys., 24(19), 11603–11615. https://doi.org/10.1039/D2CP00630H
- David J. Sprouster, W. Streit Cunningham, Gary P. Halada, Hanfei Yan, Ajith Pattammattel, Xiaojing Huang, Daniel Olds, Maryam Tilton, Yong S. Chu, Eric Dooryhee, Guha P. Manogharan, Jason R. Trelewicz, Dislocation microstructure and its influence on corrosion behavior in laser additively manufactured 316L stainless steel, Additive Manufacturing,Volume 47, 2021,102263,ISSN 2214-8604,https://doi.org/10.1016/j.addma.2021.102263.
- Yawei Gao, Ana Paula Clares Pastrana, Guha Manogharan, Adri C.T. van Duin, Molecular dynamics study of melting, diffusion, and sintering of cementite chromia core–shell particles, Computational Materials Science, Volume 199, 2021, 110721, ISSN 0927-0256, https://doi.org/10.1016/j.commatsci.2021.110721.
- Mehta, P., Malviya, M., McComb, C., Manogharan, G., & Berdanier, C. G. (2020). Mining Design Heuristics for Additive Manufacturing Via Eye-Tracking Methods and Hidden Markov Modeling. Journal of Mechanical Design, 142(12). https://doi.org/10.1115/1.4048410
- Kneen, T., Barrett, C., Manogharan, G., Carlson, P., Dimon, J., & Conner, B. (2020). Mechanical behaviour and high strain rate deformation of stainless steel 316L processed by selective laser melting. International Journal of Rapid Manufacturing. Vol 9(84). https://doi.org/10.1504/IJRAPIDM.2020.104429
- Ayres, T., Sama, S., Joshi, S., & Manogharan, G. (2019). Influence of resin infiltrants on mechanical and thermal performance in plaster binder jetting additive manufacturing. Additive Manufacturing. Vol. 30. https://doi.org/10.1016/j.addma.2019.100885
- Gao, Y., Shin, Y., Martinez, D., Manogharan, G., & van Duin, A. (2019). A ReaxFF molecular dynamics study of molecular-level interactions during binder jetting 3D-printing. Physical Chemistry Chemical Physics. Vol. 21. https://doi.org/10.1039/C9CP03585K
- Ryu, J., Shrestha, S., Manogharan, G., & Jung, J. (2018). Sliding contact wear damage of EBM built Ti6Al4V: influence of process induced anisotropic microstructure. Metals. Vol. 8(2). https://doi.org/10.3390/met8020131
- Shrestha, S., & Manogharan, G. (2017) Optimization of binder jetting using Taguchi method. JOM. Vol. 69(3). https://doi.org/10.1007/s11837-016-2231-4
- Manogharan, G., Yelamanchi, B., Aman, R., & Mahbooba, Z. (2016). Experimental study of disruption of columnar grains during rapid solidification in additive manufacturing. JOM. Vol. 68(3). https://doi.org/10.1007/s11837-015-1800-2
- Trelewicz, J., Halada, G., Donaldson, O., & Manogharan, G. (2016). Microstructure and corrosion resistance of laser additively manufactured 316L stainless steel. JOM. Vol. 68(3). https://doi.org/10.1007/s11837-016-1822-4
- Baich, L., Manogharan, G., & Marie, H. (2015). Study of infill print design on production cost-time of 3D printed ABS parts. International Journal of Rapid Manufacturing. Vol. 5(3-4). https://doi.org/10.1504/IJRAPIDM.2015.074809
- Conner, B., Manogharan, G., & Meyers, K. (2015). An assessment of implementation of entry-level 3D printers from the perspective of small businesses. Rapid Prototyping Journal. Vol. 21(5). https://doi.org/10.1108/RPJ-09-2014-0132
- Manogharan, G., Kioko, M., & Linkous, C. (2015). Binder jetting: a novel solid oxide fuel-cell fabrication process and evaluation. JOM. Vol. 67(3). https://doi.org/10.1007/s11837-015-1296-9
- Conner, B., Manogharan, G., Martof, A., Rodomsky, L., Rodomsky, C., Jordan, D., & Limperos, J. (2014). Making sense of 3-D printing: creating a map of additive manufacturing products and services. Additive Manufacturing. Vol. 1. https://doi.org/10.1016/j.addma.2014.08.005
- Tilton, M., Lewis, G.S., Manogharan, G.P., (2018) Additive Manufacturing of Orthopedic Implants. In: Li, B., Webster, T., (eds), Orthopedic Biomaterials. Springer, Cham, https://doi.org/10.1007/978-3-319-89542-0_2
Peer-Reviewed Conference Proceedings
- Saxena, A, Hood, L, Manogharan, G, & Berdanier, C. “Characterizing the Training and Evaluation of Graduate Teaching Assistants (GTAs) at Research-Intensive Universities: Highlighting Best Practices and Opportunities for Reform.” Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition. Volume 7: Engineering Education. Columbus, Ohio, USA. October 30–November 3, 2022. V007T09A005. ASME. https://doi.org/10.1115/IMECE2022-91742
- Jalui, S. S., Zargar, S. H., Moroney, S., Putz, M., Taylor, M., Hatch, S., & Manogharan, G. (2022). Development of a novel test artefact for conformal material extrusion printing. The University of Texas at Austin. https://doi.org/10.26153/TSW/44331
- Bass, N, Jalui, S, & Manogharan, G. “Net-Shape Tensile Specimens as Representatives of Material Properties of Metal Additive Manufacturing: Evaluation and Correction Factor.” Proceedings of the ASME 2022 17th International Manufacturing Science and Engineering Conference. Volume 2: Manufacturing Processes; Manufacturing Systems. West Lafayette, Indiana, USA. June 27–July 1, 2022. V002T05A029. ASME. https://doi.org/10.1115/MSEC2022-85310
- F. Fan, S. Jalui, N. Lajoie, and G. Manogharan, “Investigation of Wear Behavior of Centrifugal Disc Finishing on Additively Manufactured Ti6Al4V Samples.” The University of Texas at Austin, 2022. doi: 10.26153/TSW/44335.
- Saxena, A., & Manogharan, G. (2022). Novel Self-Strengthening Metamaterials via Additive Manufacturing. IISE Annual Conference and Expo 2022. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85137181940&partnerID=40&md5=ac131cd8c5c07f122df3ac3e82d44a30
- Saxena, A, Rai, G, Lanari, V, Rahn, CD, & Manogharan, G. “Strain-Coupled Fluidlastic Circuits Inside Metal Additive Manufactured Structures.” Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition. Volume 7A: Dynamics, Vibration, and Control. Virtual, Online. November 1–5, 2021. V07AT07A041. ASME. https://doi.org/10.1115/IMECE2021-69721
- Judkins, L, Gupta, R, Gabriele, C, Tomonto, C, Hast, MW, & Manogharan, G. “On Additive Manufacturing of Rib Fracture Fixation Implants: The Role of Lattice Design.” Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition. Volume 3: Advanced Materials: Design, Processing, Characterization, and Applications. Virtual, Online. November 1–5, 2021. V003T03A010. ASME. https://doi.org/10.1115/IMECE2021-73086
- Stebbins, R, King, P, & Manogharan, G. “A Computational Study on Novel Runner Extension Designs via 3D Sand-Printing to Improve Casting Performance.” Proceedings of the ASME 2021 16th International Manufacturing Science and Engineering Conference. Volume 1: Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering; Manufacturing Equipment and Automation. Virtual, Online. June 21–25, 2021. V001T01A021. ASME. https://doi.org/10.1115/MSEC2021-63823
- Clares, AP, & Manogharan, G. “Discrete-Element Simulation of Powder Spreading Process in Binder Jetting, and the Effects of Powder Size.” Proceedings of the ASME 2021 16th International Manufacturing Science and Engineering Conference. Volume 1: Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering; Manufacturing Equipment and Automation. Virtual, Online. June 21–25, 2021. V001T01A009. ASME. https://doi.org/10.1115/MSEC2021-63351
- Md Moinuddin Shuvo, Guha Manogharan, Novel riser designs via 3D sand printing to improve casting performance, Procedia Manufacturing, Volume 53, 2021, Pages 500-506, ISSN 2351-9789, https://doi.org/10.1016/j.promfg.2021.06.052.
-
Jalui, S. S., Spurgeon, T. J., Jacobs, E. R., Chatterjee, A., Stecko, T., & Manogharan, G. P. (2021). Abrasive Flow Machining of Additively Manufactured Titanium: Thin Walls and Internal Channels. Solid Freeform Fabrication 2021: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference Reviewed Paper, 1646–1660. https://doi.org/dx.doi.org/10.26153/tsw/17674
-
Fan, F., Soares, N., Jalui, S., Isaacson, A., Savla, A., Manogharan, G., & Simpson, T. (2021). Effects of Centrifugal Disc Finishing for Surface Improvements in Additively Manufactured Gears. https://doi.org/10.26153/TSW/17678
- R. Stebbins, P. King, and G. Manogharan, “A Computational Study on Novel Runner Extension Designs via 3D Sand-Printing to Improve Casting Performance,” ASME 2021 16th International Manufacturing Science and Engineering Conference. Jun. 21, 2021, doi: 10.1115/MSEC2021-63823.
- Gong, X, & Manogharan, G. “Machining Behavior and Material Properties in Additive Manufacturing Ti-6Al-4V Parts.” Proceedings of the ASME 2020 15th International Manufacturing Science and Engineering Conference. Volume 1: Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering; Manufacturing Equipment and Automation. Virtual, Online. September 3, 2020. V001T01A055. ASME. https://doi.org/10.1115/MSEC2020-8487
- King, P, Martinez, D, & Manogharan, GP. “Novel Sprue Designs to Reduce Casting Defects in Nickel-Aluminum Bronze: A Computational Study.” Proceedings of the ASME 2020 15th International Manufacturing Science and Engineering Conference. Volume 1: Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering; Manufacturing Equipment and Automation. Virtual, Online. September 3, 2020. V001T01A054. ASME. https://doi.org/10.1115/MSEC2020-8486
- Bicknell, G., Manogharan, G., A Comparison of the Effects of Wire Electrical Discharge Machining Parameters on the Processing of Traditionally Manufactured and Additively Manufactured 316L Stainless Steel Specimens. International Mechanical Engineering Congress and Expostion IMECE 2018, November 9-15, 2018, Pittsburgh, PA.
- Voigt, R.C., Manogharan, G.P.,3D Printed Sand Molds – An Opportunity for Investment Casters. 65th Annual ICI Technical Conference, October 21-24, 2018, Kansas City, MO.
- Iquebal, A.S., Shrestha, S., Wang, W., Manogharan, G.P., Bukkapatnam, S., Integrating Metal AM with Milling and Non-Traditional Machining to Enhance Surface and Tribological Properties of AM parts. ASPE 2015 Spring Topical Meeting, June 27-30, 2016, Raleigh, NC.
- Shrestha, S., Manogharan, G.P., Ryu, J., Experimental investigation of nanoscale contact fatigue and surface wear damage of AM Ti6Al4V. ISERC, May 21-24, 2016, Anaheim, CA. Best Student Paper Award- Manufacturing and Design Division
- Strong, D., Manogharan, G.P., Sirichakwal, I., Wakefield, T., Impact of Hybrid Manufacturing on Supply Chain for Metal Parts. ISERC, May 21-24, 2016, Anaheim, CA
- Iquebal, A. S., Shrestha, S., Wang, Z., Manogharan, G. P., Bukkapatnam, S. Influence of Milling and Non-Traditional Machining on Surface Properties of Ti6Al4V EBM Components. In Proceedings of the 2016 Industrial and Systems Engineering Research Conference.
- Issacs, A., Manogharan, G.P., Wysk, R., Harrysson, O., Shrestha, S., West, H., Mahabooba, Z., Influence of Machining Conditions in metal-Hybrid Additive Manufacturing. ISERC, May 21-24, 2016, Anaheim, CA.
- Manogharan, G.P., Shrestha, S., Enriquez, R., Optimization of Binder-Jetting using Taguchi Methods. ISERC, May 21-24, 2016, Anaheim, CA.
- Baich, L., Manogharan, G. (2015). Study of infill print parameters on mechanical strength and production cost-time of 3D printed ABS parts. In International Solid Freeform Fabrication Symposium, Austin, TX (pp. 209-2018).
- Manogharan, G., Wysk, R., Harrysson, O., Aman, R. (2015). AIMS–A Metal Additive-hybrid Manufacturing System: System Architecture and Attributes. Procedia Manufacturing, 1, 273-286.
- Conner, P., Manogharan, G.P., Martof, A.N., Rodomsky, L.M., Rodomsky, C.M., Jordan, D.C., Limperos, J.W., Evaluating Business Strategies through Mapping Products Fabricated by Additive Manufacturing. RAPID 2014, June 9-12, Detroit, MI.
- Manogharan, G.P., Wysk, R.A., Harrysson, O.L.A., Cohen, P.H., Hybrid Manufacturing: Unique Approach to Integrating Additive and Subtractive Rapid Prototyping Process. June 10-12, Proceedings of 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, Helsinki, Finland. Short-listed: Best-Paper
- Manogharan, G.P., Wysk, R.A., Load-monitoring Systems in Biomedical implants: A comprehensive review and proposed future directions. May 19-23, Proceedings of ISERC 2012, Orlando, FL.
- Medina, A., Manogharan, G.P., Wysk, R.A., Oudan-Kremer, G.E., Failures in Medical Device Development: An FDA Perspective. May 19-23, Proceedings of ISERC 2012, Orlando, FL.
- Manogharan, G.P., Soundarajan, D.K., Wysk, R.A., Study of Energy efficiencies in Rapid Prototyping. May 21-25, Proceedings of ISERC 2011, Reno, NV.
- Manogharan, G. P., Samayoa, M. J., Harrysson, O. L. A., Cohen, P. H., Rivero, I. V. (2011, January). Effects of Dynamic Spindle Speed on Bone Surface during Machining. In IIE Annual Conference. Proceedings (p. 1). Institute of Industrial Engineers-Publisher.
- Manogharan, G.P., Medina, L., Wysk, R.A., Overview of THR Implants: Design, Failures, Costs and Future Trends. May 21-25, Proceedings of ISERC 2011, Reno, NV.
- Manogharan, G.P., Wysk, R.A., Harrysson, O.L.A., Economic Model and Analysis of Cost Effectiveness of Rapid Manufacturing. October 16-20, MS&T 2011, Columbus, OH.
- Samayoa, M.J., Manogharan, G.P., Harrysson, O.L.A., Cohen, P.H., Rivero, I.V. (2011, January). The Dynamic Effects of Pneumatic Power Instruments on Machining of Bone. In IIE Annual Conference. Proceedings (p. 1). Institute of Industrial Engineers-Publisher.
- Frigola, P., Harrysson, O.L.A., Manogharan, G.P., Medina, F., and et al. Development of a CW NCRF Photo-injector using Solid Freeform Fabrication (SFF). May 23-28, Proceedings of IPAC 2010, Kyoto, Japan.
- Kumar, V., Manogharan, G., Cormier, D.R. (2009). Design of periodic cellular structures for heat exchanger applications. In Solid Freeform Fabrication Symposium Symposium Proceedings. Texas:[sn] (pp. 738-748).
- Martinez, D., Sama, S. R., Toykoc, H., Sim, J., and Manogharan, G. In-Direct Hybrid AM: Advancing Metal Casting via 3D Sand-Printing, SFF 2019, August 12 – 14, 2019, Austin, TX.
- Martinez, D., Bate, C., and Manogharan, G. Influence of 3D Sand-Printing Processing Conditions on Thermo-Mechanical Properties of Molds, SFF 2019, August 12 – 14, 2019, Austin, TX.
- Kneen, C. Barrett, B. Conner and GP. Manogharan. High Strain Rate Mechanical Behavior of Stainless Steel 316L Processed by Selective Laser Melting. planned submission to Additive Manufacturing, TMS 2017, February 26 – March 2, 2017
- Shrestha, GP. Manogharan and J. Ryu. Wear and Corrosion Resistance of Metal AM Bio-Medical Parts. RAPID, May 16-19, 2016, Orlando, FL.
- Manogharan, C.A. Linkous, J. Hammond and M.A. Abraham. Sustainability in the Design and Fabrication of 3D-Printed Solid Oxide Fuel Cells. 2015 Pacifichem, December 15-20, 2015, Honolulu, HI.
- A. Abraham and GP. Manogharan. Sustainability in Engineering. 2015 AIChE Annual meeting, November 8-13, 2015, Salt Lake City, UT.
- Halada, GP. Manogharan and M. Cuiffo. A Structural, Surface Spectroscopic and Electrochemical Study of Printed Stainless Steel. MS&T 2015, October 4-8, 2015, Columbus, OH
- Yelamanchi, GP. Manogharan and J. Cook. Experimental Study of Disruption of Columnar Grain growth during Rapid Solidification. MS&T 2015, October 4-8, 2015, Columbus, OH
- Baich and GP. Manogharan. Influence of In-fill Print Parameters on Mechanical Strength and Production Cost-Time of 3D Printed ABS Parts. MS&T 2015, October 4-8, 2015, Columbus, OH.
- P. Conner, T.J. Kneen, and GP. Manogharan. Mechanical Behavior at Various Strain Rates of Stainless Steel 316L Processed by Selective Laser Melting. MS&T 2015, October 4-8, 2015, Columbus, OH.
- Yelamanchi and GP. Manogharan. Experimental Disruption of Columnar Grain growth during Rapid Solidification. ISERC 2015, May 20-June 2, 2015, Nashville, TN.
- J. Kneen, A.S. Bowers, B.P. Conner and GP Manogharan. Characterizing the high strain rate mechanical behavior of stainless steel 316L processed by selective laser melting. MS&T 2014, October 12-15, 2014, Pittsburgh, PA.
- Manogharan, G. Berfgors and R.A. Wysk. Process mapping heated-bed 3D polymer printing. ISERC 2013, May 18-22, 2013, San Juan, PR.
- Manogharan, O.L.A. Harrysson and R.A. Wysk. Challenges and Benefits of Hybrid Additive and Subtractive Manufacturing. ISERC 2013, May 18-22, 2013, San Juan, PR.
- Manogharan and R.A. Wysk. Load-monitoring Systems in Biomedical implants: A comprehensive review and proposed future directions. May 19-23, ISERC 2012, Orlando, FL.
- Poster-Presentation: Limperos, D. Jordan, M. Manna, D. Pflager and GP. Manogharan. Study of Effects on Production Economics using 3D Printed Sand Casting Molds. QUEST 2015, Choose Ohio First Scholarship Program (COFSP), Youngstown State University, March 31, 2015, Youngstown, OH.
- Poster-Presentation: Manogharan, O.L.A. Harrysson and R. A. Wysk. Hybrid Manufacturing- Integrating Additive and Subtractive Methods. Doctoral Colloquium, ISERC 2013, May 18-22, San Juan, PR.