This is my Farm, we used 3d printed houses and farms to add a new dimension

This is all 4 our Farm plots unioned together.

We liked this idea because it was a unique take on the Alt Everson concept.

Here is the final model, It was printed out right before the break and it came out well. The only thing that I would have changed would have been to make it a little larger.

 

And here is the constructed Bency and mouse design.

The major issue with this project was trying to find a way to unite the mouse model I made and the scanned bency boat.

Here is a picture of the scanned and reduced bency boat:

And here is a picture of my model

Mouse Reslice pg1

Mouse Reslice pg2

Here are the results of my reslice. Today I’ll use this for fabrication.

 

There were good results from the laser cutting. the only real issue was the dowel holes got singed

I’ve fabricated my personal logo, I liked the idea of using a piece of scrap wood and putting my logo on that. It makes it feel more permanent.

One thing that I would do differently would be to shore up the interior corners and merge them together in order to make the logo more robust.

For this, I chose a computer mouse. For a few reasons, 1 I use computers a lot, 2 it was not entirely symmetrical, 3 it was something I had at hand.

These are the plans for the laser cutter. I’ve included the numbers for future reference.

This is the model that I used to make the plans.

Output file

This is my personal logo it is a nice gestalt cube with my initial in the cube.