(* indicates current or former student; ** is current or former postdoc)
Book Chapters (peer reviewed)
- Gilbert, T.* and Terpenny, J., Book Chapter: “Modeling Engineering Student Success Needs,” in Women in Industrial and Systems Engineering: Key Advances and Perspectives on Emerging Topics!, in the Women in Engineering and Science series, Springer (in press).
- Zheng, L.*, Chang, X.*, and Terpenny, J.P., Book Chapter: “Ontology Development and Optimization for Data Integration and Decision Making in Product Design and Obsolescence Management,” in Ontology Modeling in Physical Asset Integrity Management, Springer International Publishing AG, Switzerland, 2015, XVIII, (invited).
- Moon, S.K.*, Chang, X.*, Terpenny, J.P., Simpson, T., and Kumara, S.R.T., Book Chapter: “Toward a Knowledge Support System for Product Family Design,” in Advances in Mass Customization and Personalization, Vol. 1, Frank Piller and Mitchell Tseng (Ed), World Scientific Press, December 2009 (invited).
- Wang, J.* and Terpenny, J.P., Book Chapter: “Interactive Preference Incorporation in Evolutionary Engineering Design,” Yaochu Jin (Ed), Knowledge Incorporation in Evolutionary Computation, in the Studies in Fuzziness and Soft Computing Series, Springer, 2005, 525-543.
- Fan, Z.*, Wang, J., Seo K., Hu, J., Rosenberg, R. C., Terpenny, J. P., and Goodman, E. D., Book Chapter: “Automating the Hierarchical Synthesis of MEMS Using Evolutionary Approaches,” Nadia Nedjah (ed.), Evolutionary Machine Design: Methodology and Applications, Nova Science Publishers, New York. 2005, 129-149.
Book Chapters (editor reviewed)
- National Science Foundation Engineering Senior Design Projects to Aid Persons with Disabilities, contributing author of chapters with projects from University of Massachusetts in annual editions published 2000-2004. Edited by John D. Enderle and Brooke Hallowell, Creative Learning Press, Inc.
Journal Publications (accepted, in press or published)
- Wu, D.**, Wei, Y.*, and Terpenny, J., “Predictive Modeling of Surface Roughness in Additive Manufacturing Using Machine Learning,” International Journal of Production Research https://doi.org/10.1080/00207543.2018.1505058.
- Wu, D.**, Ren, A.*, Zhang, W., Terpenny, J., Liu, P., Fan, F., and Fu, X., “Cyber security for digital manufacturing”, Journal of Manufacturing Systems https://doi.org/10.1016/j.jmsy.2018.03.006 .
- Li, Z., Wu, D.**, Hu, C., and Terpenny, J., “An Ensemble Learning-based Prognostic Approach with Degradation-Dependent Weights for Remaining Useful Life Prediction,” Special Issue on Impact of Prognostics and Health Management in Systems Reliability and Maintenance Planning, Reliability Engineering & System Safety, DOI 10.1016/j.ress.2017.12.016
- Wu, D.**, Jennings, C. *, Terpenny, J., Gao, R., and Kumara, S.,“A Comparative Study on Machine Learning Algorithms for Smart Manufacturing: Application of Random Forests to Tool Wear Prediction,” Journal of Manufacturing Science and Engineering 139 (7), April 2017.
- Wu, D**., Liu., S., Zhang, L., Terpenny, J., Gao, R, Kurfess, T., & Guzzo, J., “A Fog Computing-Based Framework for Process Monitoring and Prognosis in Cyber-Manufacturing,” Journal of Manufacturing Systems, 43(1): 25-34, 2017.
- Wu, D**., Liu. X., Hebert, S., Gentzsch, W., & Terpenny, J., “Democratizing Digital Design and Manufacturing Using High Performance Cloud Computing: Performance Evaluation and Benchmarking,” Journal of Manufacturing Systems, 2017.
- Lesniak, K.*, Tucker, C., Bilen, S., Terpenny, J., Anumba, C., “Immersive Distributed Design through Real Time Capture, Translation and Rendering of 3D Mesh Data,” ASME Journal of Computing and Information Science in Engineering, 17 (3), February 2017.
- Jennings, C.*, Wu, D., & Terpenny, J., “Forecasting Obsolescence Risk and Product Life Cycle with Machine Learning,” IEEE Transactions on Components, Packaging, and Manufacturing Technology, 6(9):1428-1439, doi: 10.1109/TCPMT.2016.2589206, 2016.
- Wu, D**., Terpenny, J., & Schaefer, D., “Digital Design and Manufacturing on the Cloud: A Review of Software and Services,” Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Cambridge University Press, https://doi.org/10.1017/S0890060416000305, 2016.
- Wu, D**., Terpenny, J., Gentzsch, W., “Cloud-Based Design, Engineering Analysis, and Manufacturing: A Cost-Benefit Analysis,” Journal of Manufacturing Science and Engineering, 137(4): 040903-040903-9, DOI: 10.1115/1.4030306, August 2015.
- Zheng, L.*, Terpenny, J., and Sandborn, P., “Design Refresh Planning Models for Managing Obsolescence,” IIE Transactions, Design and Manufacturing, Vol. 47, Issue 12, 2015. Also selected for feature in IE Magazine.
- Sahin, A.*, Orfi, N.*, Terpenny, J., and Van Aken, E., “A Structured Approach to Platform-Driven Product Planning”, Engineering Management Journal, Volume 25, Issue 2, June 2014.
- Zheng, L.* and Terpenny, J., “A Hybrid Ontology Approach for Integration of Obsolescence Information,” Computers & Industrial Engineering, 65, Issue 3, July 2013, 485–499.
- Zheng, L.*, Nelson, R.*, Terpenny, J.P., and Sandborn, P., “Ontology-Based Knowledge Representation for Product Life-Cycle Concepts and Obsolescence Forecasting,” Journal of Computing and Information Science in Engineering, March 2013, Vol. 13, 014501:1-8.
- Kim, H. N.*, Smith-Jackson, T., and Terpenny, J.P., “Haptic Perception of Users with Low Vision and Their Needs in Haptic-incorporated User Interfaces,” Disability and Rehabilitation: Assistive Technology, April 23, 2013, 1-14 (doi:10.3109/17483107.2013.769121).
- Orfi, N.*, Terpenny, J., and Sahin-Sariisik, A., “Harnessing Product Complexity: Step 2 – Measuring and Evaluating Complexity Levels,” The Engineering Economist, Vol. 57, August 2012, 178-191.
- Butler, W.M.*, Terpenny, J., Goff, R., Pant, R., Steinhauer, H.*, “Improving the Aerospace Capstone Design Experience Through Simulation Based Learning,” International Journal of Engineering Education, February 2012: Volume 28, No. 2, 1-9.
- Orfi, N.*, Terpenny, J.P., and Sahin-Sariisik, A., “Harnessing Product Complexity: Step 1 – Establishing Product Complexity Dimensions and Indicators,” The Engineering Economist, Vol. 56, March 2011, 59-79.
- Ren, P.*, Hong, D.W., Terpenny, J., and Goff, R., “Bridging Theory and Practice in a Senior Level Robotics Course for Mechanical and Electrical Engineers,” ASEE Computers in Education Journal, No.4, October-December 2010.
- Li, Y.*, Chang, X.*, Terpenny, J., and Gilbert, T.*, “Ontology-based Multi-platform Identification Method”, Journal of Computing and Information Science in Engineering, 10, No.3 September 2010, 031011 (10 pages) doi:10.1115/1.3467010.
- Chang, X.*, Terpenny, J., and Koelling, P., “Reducing Errors in the Development, Maintenance and Utilisation of Ontologies”, International Journal of Computer Integrated Manufacturing, April 2010, Volume 23, Issue 4, 341-352.
- Williams, C., McNair, L., Crede, E.*, Paretti, M., Terpenny, J., “Designing Hands-On Teaming Activities for Courses with Large Enrollments: Exploring Sustainability Tradeoffs,” Special Issue on Sustaining Sustainable Design, International Journal of Engineering Education, 2010, Vol. 26, No. 2, 408-417.
- Goff, R., Williams,, Terpenny, J., Gilbert, K., Knott, T. and Lo, J., “ROXIE: Real Outreach eXperiences In Engineering First-Year Engineering Students Designing for Community Partners,” Special Issue on Sustaining Sustainable Design, International Journal of Engineering Education, 2010, Vol. 26, No. 2, 349-358.
- Chang, X.*, Rai R., and Terpenny, J., “Development and Utilization of Ontologies in Design for Manufacturing (DFM)”, Journal of Mechanical Design, February 2010, Vol. 132, No. 2, 12 pages.
- Chang, X.* and Terpenny, J.P., “Ontology-Based Data Integration and Decision Support for Product e-Design,” Robotics and Computer-Integrated Manufacturing (RCIM), 2009, Vol. 25, 863-870 (invited).
- Rai, R.* and Terpenny, J., “Managing Technological Product Obsolescence Design Principles,” IEEE Transactions on Components and Packaging Technologies, December 2008, Vol. 31, No. 4, 880-889.
- Wang, J.*, Fan, Z.*, Terpenny, J.P., and Goodman, E.D., “Cooperative Body Brain Coevolutionary Synthesis of Mechatronic Systems,” Artificial Intelligence for Engineering Design, Analysis, and Manufacturing (AIEDAM), 2008, Vol. 22, No. 3, 219-234.
- Chang, X.*, Sahin, A.*, and Terpenny, J., “Ontology-Based Graphical Modeling Tool for Product Conceptual Design”, Robotics and Computer-Integrated Manufacturing (RCIM), 24, 2008, 755-762 (invited).
- Terpenny, J., Goff, R., Lohani, V., Mullin, J.*, and Lo, J., “Preparing Globally and Socially Conscious Engineers: International and Human-Centered Design Projects and Activities in the First Year,” Special Issue on Design and Engineering Education in the Flat World, International Journal of Engineering Education, March 2008, Vol. 24, No. 2, 409-419.
- Kasarda, M., Terpenny, J., Inman, D., Precoda, K., Jelesko, J., Sahin, A.*, and Park, J.*, “Design for ADaptability (DFAD) – A New Concept for Achieving Sustainable Design,” Robotics and Computer Integrated Manufacturing, December 2007, Vol. 23, No. 6, 727-734.
- Sahin, A.*, Bøe, M.*, Terpenny, J. and Bøhn, J., “Study to Understand Perceptual Discrepancies Using Visual Illusions and Data Envelopment Analysis (DEA),” Journal of Mechanical Design, Special Edition on Engineering Design Education, July 2007, Vol. 129, Issue 7, pp. 744-752.
- Terpenny, J.P., Goff, R.M., Vernon, M.R., Green, W.R., “Utilizing Assistive Technology Design Projects and Interdisciplinary Teams to Foster Inquiry and Learning in Engineering Design,” Special Issue on Learning and Engineering Design, International Journal of Engineering Education, vol. 22, no. 3, 2006 (invited).
- Shooter, S., Simpson, T., Stone, R., Terpenny, J. and Kumara, S., “Toward a Multi-agent Information Management Infrastructure for Product Family Planning and Mass Customisation,” International Journal of Mass Customisation, vol. 1, no. 1, 2005, 134-155.
- Wang, J.*, Fan, Z.*, Terpenny, J.P., and Goodman, E.D., “Knowledge Interaction with Genetic Programming in Mechatronic Systems Design Using Bond Graphs,” IEEE Transactions on Systems, Man and Cybernetics, Special Issue on Knowledge Extraction and Incorporation in Evolutionary Computation, vol. 35, no. 2, May 2005, 172-182.
- Sullivan, W.G. and Terpenny, J.P., “A Virtual Classroom Experiment for Teaching Engineering Economy,” The Engineering Economist, 49, no. 4, 2004, 279-306.
- Wang, J.* and Terpenny, J., “Interactive Evolutionary Solution Synthesis in Fuzzy Set-based Preliminary Engineering Design,” Journal of Intelligent Manufacturing, 14, no. 2, 2003, 153-167.
- Wang, J.* and Terpenny, J.P., “Learning and Adaptation of Fitness Approximation in Engineering Design Synthesis,” International Journal of Smart Engineering System Design, 5, no. 3, 2003, 1-11.
- Terpenny, J.P., “Toward An Integrated Framework for Concurrent Engineering Design”. European Design Engineer, vol. 2, no. 1, 1998, 36-38.
- Terpenny, J.P. and Davis, R.P., “Postoptimality Analysis for a Network Protocol Design Model,” Computers and Industrial Engineering Journal, vol. 9, no. 4, 1985, 327-337.
Journal Publications (in review, under revision or in preparation)
- Wei, Y.*, Wu, D.**, and Terpenny, J., “Decision-Level Data Fusion in Quality Control and Predictive Maintenance,” IEEE Transactions on Automation Science and Engineering, Special Issue on Smart Manufacturing, (in review, April 2019).
- Matenga, Z.*, Fedderke, J., and Terpenny, J., “Optimal Taxing Strategy to Increase Competitiveness of Green Utility Suppliers: A Theoretical Framework,” Energy Policy, (in review, April 2019).
- Matenga, Z.*, Fedderke, J., and Terpenny, J., “Pricing Dynamics of Electricity in Privatized Markets with Underdeveloped Networks,” Energy Economics (in review, October 2018).
- Jennings, C.*, Wu, D.**, and Terpenny, J., “Data-Driven Design for Obsolescence Risk Management,” ASME Journal of Mechanical Design Special Issue: Data-Driven Design, (under revision).
- Jennings, C.*, Wu, D.**, Terpenny, J., and Sandborn, “Reducing the Cost Impact of Misclassification Errors in Obsolescence Risk Forecasting,” International Journal of Production Economics, (under revision).
- Wei, Y.*, Wu, D.**, and Terpenny, J., “Damage Propagation Prediction for Aircraft Engines Using Machine Learning,” (in preparation).
- Wu, D.**, Jennings, C.*, Terpenny, J., Gao, R., and Kumara, S., “Data-Driven Prognostics for Tool Wear Prediction,” Journal of Manufacturing Science and Engineering, (in review).
Conference Proceedings Publications (peer reviewed)
- Wei, Y.*, Wu, D.**, and Terpenny, J., “A Decision-Level Data Fusion Approach to Surface Roughness Prediction,” NAMRC 47 | MSEC 2019, June 10–14, 2019, Erie, Pennsylvania.
- Kulkarni, A.*, Matenga, Z.*, and Terpenny, J., “Optimal Sensor Selection Modeling,” IISE Annual Conference & Expo 2019, May 18-21, 2019, Orlando.
- Matenga, Z.*, Terpenny, J., and Fedderke, J., “Optimal Taxing Strategy to Improve Competitiveness of Renewable Energy Utilities,” IISE Annual Conference & Expo 2019, May 18-21, 2019, Orlando.
- Kulkarni, A.*, Vidvans, A., Rifat, M.*, Bicknell, G.*, Gong, X.*, Moanogharan, G., Terpenny, J., and Basu, S., “Scalable Detection of Defects in Additively Manufactured PLA Components,” Proceedings of the ASME 2018 North American Manufacturing Research Conference (NAMRC 46), June 18-22, 2018, College Station, Texas.
- Wu, D.**, Wei, Y.*, and Terpenny, J., “Surface Roughness Prediction in Additive Manufacturing Using Machine Learning,” Proceedings of the ASME 2018 Manufacturing Science and Engineering Conference MSEC2018, June 18–June 22, 2018, College Station, Texas.
- Kulkarni, A.*, Jennings, C.*, and Terpenny, J., “Clustering Design Structure Matrix: A Review of Methods and Evaluation Metrics,” Proceedings of the 2018 Industrial and Systems Engineering Conference, May 19-22, 2018, Orlando.
- Harmonosky, C., Terpenny, Lehtihet, A., Ventura, J., Prabhu, V., Freivalds, A., and Joshi, E., “Initiating Curricular Change through Product-Based Learning,” Proceedings of the 2018 Industrial and Systems Engineering Conference, May 19-22, 2018, Orlando (abstract).
- Wei, Y.*, Wu, D.**, and Terpenny, J., “Data-Driven Predictive Maintenance for Aircraft Engines,” Proceedings of the 2018 Industrial and Systems Engineering Conference, May 19-22, 2018, Orlando.
- Matenga, Z.* and Terpenny, J., “Pricing Dynamics of Electricity in Privatized Markets with Underdeveloped Networks,” Proceedings of the 2018 Industrial and Systems Engineering Conference, May 19-22, 2018, Orlando, IISE Engineering Economy Division Best Student Paper Award, 1st Place.
- Terpenny, J., Harmonosky, C., Lehtihet, A., Ventura, J., Prabhu, V., Freivalds, A., and Joshi, E., “Product-Based Learning: Bundling Goods and Services For An Integrated Context Rich Industrial Engineering Curriculum,” ASEE Annual Conference and Exhibition, Salt Lake City, Utah, June 24-27, 2018.
- Li, Z., Wu, D.**, Hu, C., Terpenny, J., and Shen, S., “An Ensemble Learning-based Prognostic Approach with Degradation-Dependent Weights: Prediction of Remaining Useful Life for Aircraft Engines,”International Design Engineering Technical Conferences & Computers & Information in Engineering Conference (IDETC/CIE 2017), August 6-9, 2017, Cleveland, OH.
- Wu, D.**, Jennings, C.*, Terpenny, J., Gao, R. & Kumara, S., “Data-Driven Prognostics Using Random Forests: Prediction of Tool Wear,” Proceedings of the ASME 2017 International Manufacturing Science and Engineering Conference, Paper Number: MSEC2017-2679, Los Angeles, CA, U.S., 2017.
- Ren, A., Wu, D.**, Terpenny, J., Zhang, W., & Liu, P., “Cyber Security in Smart Manufacturing: Survey and Challenges,” Proceedings of the 2017 Industrial and Systems Engineering Research Conference, Pittsburgh, Pennsylvania, U.S., 2017.
- Jennings, C.*, Wu, D.**, and Terpenny, J., “Receiver Operating Characteristic Analysis for Forecasting Obsolescence Risk,” Proceedings of the 2017 Industrial and Systems Engineering Conference, May 20-23, 2017, Pittsburgh, PA.
- Zokaeinikoo, M.* and Terpenny, J., “Movie Actor Key Attributes Success Prediction With Network Community Detection,” Proceedings of the 2017 Industrial and Systems Engineering Conference, May 20-23, 2017, Pittsburgh, PA.
- Wu, D.**, Jennings, C.*, Terpenny, J., & Kumara, S., “Cloud-Based Machine Learning for Predictive Analytics: Prediction of Tool Wear,” IEEE International Conference on Big Data, Washington D.C., U.S., 2016.
- Lesniak, K.*, Tucker, C., Bilen, S., Terpenny, J., Anumba, C.,“DETC2016-59762: Networked, Real Time Translation of 3D Mesh Data to Immersive Virtual Reality Environments,” ASME 2016 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2016, August 21–24, 2016 in Charlotte, North Carolina. Awarded best paper CIE Conference – Virtual Environments and Systems (VES).
- Wu, D.**, Terpenny, J., and Schaefer, D., “A Survey of Cloud-Based Design and Manufacturing Tools,” ASME 2016 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2016, August 21–24, 2016 in Charlotte, North Carolina (in review).
- Jennings, C.*, Wu, D.**, and Terpenny, J., “Forecasting Obsolescence Risk using Machine Learning,”Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference, (MSEC 2016), June 27 – July 1, 2016, Blacksburg, Virginia (in review).
- Wu, D.**, Terpenny, J., Zhang, L., Gao, R., and Kurfess, T., “Fog-Enabled Architecture for Data-Driven Cyber-Manufacturing Systems,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference, (MSEC 2016), June 27 – July 1, 2016, Blacksburg, Virginia (in review).
- Wang, P., Gao, R., Wu, D.**, and Terpenny, J., “A Computational Framework for Cloud-Based Machine Prognosis,”49th CIRP Conference on Manufacturing Systems (CIRP-CMS 2016), Stuttgart, Germany, from May 25th to 27th, 2016, (accepted).
- Jennings, C.*, Wu, D.**, and Terpenny, J., “Forecasting Product Obsolescence Using Machine Learning,” Industrial and Systems Engineering Research Conference (ISERC), May 21-24, 2016, Anaheim, California (in review).
- Wu, D.**, Liu X., Gentzsch, W., Hebert, S., Slagter, W., and Terpenny, J., “Performance Analysis of High Performance Computing in the Cloud: A Case Study for Finite Element Analysis,” ASME 2015 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2015, August 2-5, 2015, Boston, Massachusetts.
- Jennings, C.* and Terpenny, J., “Taxonomy of Factors for Lifetime Buy,” 2015 Industrial and Systems Engineering Research Conference (ISERC), Nashville, Tennessee, May 30-June 2, 2015.
- Wu, D.**, Terpenny, J., and Gentzsch, W., “Cloud-Based Design, Engineering Analysis, and Manufacturing: A Cost-Benefit Analysis,” North American Manufacturing Research Conference (NAMRC), June 8-12, 2015, Charlotte, North Carolina.
- Zheng, L.*, Orfi, N.*, Terpenny, J., “A study of correlation between DMSMS obsolescence and counterfeit electronics”, ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, August 14-17, 2014, Buffalo, NY.
- Orfi, N.*, Zheng, L.*, Chang, X.*, and Terpenny, J., “Ontology-based system for product complexity decision making,” Industrial and Systems Engineering Research Conference (ISERC), May 31-June 3, 2014, Montreal, Canada (invited).
- Terpenny, J., “Mary Poppins Was a Very Wise Woman: Insights for Effective Leadership in Academia”, ASEE Annual Conference and Exhibition, June 15-18, 2014, Indianapolis.
- Zheng, L.*, Sandborn, P., Terpenny, J., and Orfi, N.*, “An Ontological Model and Method for Obsolescence Resolution and Management,”24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), May 20-23, 2014, San Antonio, Texas.
- Zheng, L.*, Chang, X.*, and Terpenny, J., “Ontology-based Data Inquiry for Mitigation of Obsolescence Cost Analysis,”ASME 2013 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), August 4-7, 2013 in Portland, OR.
- Orfi, N.*, Terpenny, J., and Sahin-Sariisik, A., “Managing Complexity in a Production System,” Industrial and Systems Engineering Research Conference (ISERC), May 18-22, 2013, San Juan, Puerto Rico.
- Zheng, L.*, Chang, X.*, and Terpenny, J., “Development and Optimization of Ontologies for Data Integration and Knowledge Management,” Industrial and Systems Engineering Research Conference (ISERC), May 18-22, 2013, San Juan, Puerto Rico.
- Fu, K., Reid, T., Terpenny, J., Thurston, D., Vance, J., Finger, S., Wiens, G., Kazerounian, K., Allen, J., and Jacobson, K., “Broadening Participation: A Report on a Series of Workshops Aimed at Building Community and Increasing the Number of Women and Minorities in Engineering Design,” 2013 ASEE Annual Conference and Exhibition, June 23 – 26, 2013 Atlanta, GA.
- Chang, X. and Terpenny, J., “Ontology-based Malfunction Forecast and Root Cause Analysis in Product Design,” ASME 2012 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), August 12-15, 2012, Chicago, IL.
- Zheng, L., Terpenny, J., Nelson, R., and Sandborn, P., “Design Refresh Planning Models for Managing Obsolescence,” ASME 2012 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), August 12-15, 2012, Chicago, IL.
- Zheng, L.* and Terpenny, J., “A Hybrid Ontology Approach for Information Integration,” Industrial and Systems Engineering Research Conference (ISERC), May 19-23, 2012, Orlando, FL.
- Orfi, N.*, Terpenny, J., and Sahin-Sariisik, A., “Harnessing Complexity: Evaluating Product Family Design,” Industrial and Systems Engineering Research Conference (ISERC), May 19-23, 2012, Orlando, FL (abstract and presentation).
- Goff, R. and Terpenny, J., “Engineering Design Education – Core Competencies,” 50th AIAA Aerospace Sciences Meeting (ASM), January 9-12, 2012, Nashville, TN.
- Jacobson, K., Campion, M., Terpenny,, and Finger, S., “Attracting Future Engineers – Best Practices and Lessons Learned,” panel presentation DEC 3-1, ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 29-31, 2011, Washington, D.C.
- Nelson, III, R.*, Sandborn, P., Zheng, L.*, Terpenny, J., “Modeling constraints in Design Refresh Planning,” ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 29-31, 2011, Washington, D.C.
- Butler, W.M.*, Terpenny, J., Goff, R., Pant, R., Steinhauer, H.*, “Improving the Aerospace Capstone Design Experience Through Simulation Based Learning,” Mudd Design Workshop VIII, Design Education: Innovation and Entrepreneurship, Harvey Mudd College, 26–28 May 2011, Claremont, California.
- Terpenny, J., “Preparing A Competitive NSF Undergraduate Education Proposal,” Industrial Engineering Research Conference (IERC), Reno, Nevada, May 21-25, 2011 (invited).
- Gilbert, T.* and Terpenny, J., “A Framework to Assess Performance Areas Critical to Student Success,” Industrial Engineering Research Conference (IERC), Reno, Nevada, May 21-25, 2011.
- Zheng, L.*, Nelson, R.*, Terpenny, J.P., and Sandborn, P., “Ontology-Based Knowledge Representation for Product Life-Cycle Concepts and Obsolescence Forecasting,” Industrial Engineering Research Conference (IERC), Reno, Nevada, May 21-25, 2011.
- Hyder, Z.*, Ali, Z.*, Terpenny, J., and Goff, R., “Employing Engineering Design Tools for Designing/Redesigning of Courses,” Session: The Best of Design in Engineering, 2011 ASEE Annual Conference and Exhibition, June 26 – 29, 2011 Vancouver, BC, Canada.
- Rai, R., Terpenny, J., Tekunoff, U.*, Schafer, C.*, Sandborn, P., “Mitigating E-Waste and Osborne Effect: A Product Service System (PSS) Based Design Approach to Create Obsolescence Resistant Products,”: ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2010, August 15–18, 2010, Montreal, Quebec, Canada.
- Li, Y.*, Terpenny, J., and Chang, X.*, “Activity-based Cost Estimation with Consideration of Learning Effects in Product Family Design,” Flexible Automation and Intelligent Manufacturing, FAIM 2010, July 12-14, 2010, California State University, East Bay.
- Williams, C.B., Crede, E.*, Goff, R., and Terpenny, J.P., “Effects of Student-Customer Interaction in a Cornerstone Design Project,” 2010 ASEE Annual Conference and Exhibition, June 20 – 23, 2010 Louisville, Kentucky.
- Gilbert, T.*, Terpenny, J. and Artis, S., “Student Success – Oriented Needs Analysis Framework: A Pilot Study,” 2010 ASEE Annual Conference and Exhibition, June 20 – 23, 2010 Louisville, Kentucky.
- Butler, W.M.*, Terpenny, J., and Goff, R., “Using Technology to Bring Realism, Improved Learning and Motivation to Capstone Design,” National Capstone Design Conference, June 7-9, 2010, Boulder, Colorado.
- Li, Y.* and Terpenny, J., “A Framework of Activity-based Costing for Product Family Cost Estimation,” Industrial Engineering Research Conference (IERC), Cancun, Mexico, June 5-9, 2010.
- Orfi, N.*, Terpenny, J., and Sahin, A., “Harnessing Complexity: An Integrative Approach,” Industrial Engineering Research Conference (IERC), Cancun, Mexico, June 5-9, 2010.
- Gilbert, T.*, Terpenny, J.P. and Artis, S., “An Engineering Student Success –Oriented Needs Identification and Prioritization Framework,” Industrial Engineering Research Conference (IERC), Cancun, Mexico, June 5-9, 2010.
- Gilbert, T.*, Terpenny, J.P. and Artis, S., “Student Success – Oriented Needs Analysis Framework,” ASEE South East Section Annual Conference, April 18-20, 2010.
- Holland, C.*, Newman, A.S.*, Do, T.*, Terpenny, J., and Goff, R., “An Updated Approach for Preparing Mechanical Engineering Students for the Machine Design Industry.”” ASEE South East Section Annual Conference, April 18-20, 2010.
- Kelley, K.*, Terpenny, J., and Goff, R., “Reflections On Mentoring First Lego League,” ASEE South East Section Annual Conference, April 18-20, 2010.
- Butler, W.M.*, Terpenny, J., and Goff, R., “An Experiment in Learner –Centered Instruction in Aerospace Engineering Capstone Design,” ASEE South East Section Annual Conference, April 18-20, 2010.
- Currier, P.*, Goff, R., and Terpenny, J., “A Proposed Leaner-Centered Mechatronics Engineering Instructional Program.”” ASEE South East Section Annual Conference, April 18-20, 2010.
- Noble, A.*, Goff, R. and Terpenny, J., “The Effect Knowledge Dissemination Structures Play in Increasing Design Efficiency in Small Design Teams,” ASEE South East Section Annual Conference, April 18-20, 2010.
- Koch, L.*, Goff, R. and Terpenny, J., “Introducing Undergraduates to Load Calculations: A Course Designed Around ASCE-7,”” ASEE South East Section Annual Conference, April 18-20, 2010.
- Williams, C., Goff, R., Terpenny, J., and Gilbert, K., “Real Outreach eXperiences In Engineering (ROXIE): Merging Design and Service Learning for First-Year Students on a Large Scale,” 2009 EPICS Conference on Service Learning in Engineering and Computing, August 3-4, 2009, Austin, Texas (abstract accepted for interactive session).
- Williams, C.B., Terpenny, J.P., and Goff, R.G., “Designing a Service-Learning Design Project for a First-year Engineering Course,” ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2009, August 30 – September 2, 2009, San Diego, California, USA.
- Williams, C., McNair, L., Paretti, M., Terpenny, J., “Designing Hands-On Teaming Activities for Courses with Large Enrollments: Exploring Sustainability Tradeoffs,” Mudd Design Workshop VII: Sustaining Sustainable Design, Harvey Mudd College, 28-30 May 2009.
- Terpenny, J., Goff, R., Williams,, Gilbert, K., Knott, T. and Lo, J., “ROXIE: Real Outreach eXperiences In Engineering First-Year Engineering Students Designing for Community Partners,” Mudd Design Workshop VII: Sustaining Sustainable Design, Harvey Mudd College, 28-30 May 2009.
- Farris, S.* and Terpenny, J., “A Unified Mathematical Framework and Methodology for Adaptive Systems Design,” Industrial Engineering Research Conference (IERC) 2009, Miami, FL, May 30-June 3, 2009.
- Li, Y.*, Hu, N.*, and Terpenny, J., “An Approach to Address Independence of Criteria in Multi-Criteria Decision-Making,” Industrial Engineering Research Conference (IERC) 2009, Miami, FL, May 30-June 3, 2009.
- Josias, C.* and Terpenny, J., “Proactively Managing Component Obsolescence,” Industrial Engineering Research Conference (IERC) 2009, Miami, FL, May 30-June 3, 2009.
- Chang, X.*, Li, Y.*, Brisbon, B.*, Terpenny, J., “Ontology-based Data Process for Integrated Data,” Flexible Automation and Intelligent Manufacturing, FAIM 2009, Middlebourgh, UK, July 6-8, 2009.
- Williams, C., Goff, R., Terpenny, J., Gilbert, K., Knott, M., and Lo, J., “Real Outreach Experiences in Engineering: Merging Service Learning and Design in a First-Year Engineering Course,” 2009 ASEE Annual Conference & Exhibition, Austin, TX, June 14 – 17, 2009.
- Johnson, A.*, Layne, P., and Terpenny, J., “Empowering Women as Leaders and Scholars: Advance Leadership Programs at a Doctoral STEM-Dominant University,” 2009 ASEE Annual Conference & Exhibition, Austin, TX, June 14 – 17, 2009.
- Folz, D.*, Terpenny, J.P., and Goff, R., “Re-designing a Junior-Level Materials Processing Laboratory Course To Achieve Broader Impact on Senior-Level Capstone Projects,” 2009 ASEE Annual Conference & Exhibition, Austin, TX, June 14 – 17, 2009.
- Ren, P.*, Hong, D., Terpenny, J.P., Goff, R., “Bridging Theory and Practice in a Senior Level Robotics Course for Mechanical and Electrical Engineers,” 2009 ASEE Annual Conference & Exhibition, Austin, TX, June 14 – 17, 2009.
- Williams, C., Goff, R., Terpenny, J., Knott, T., Gregg, M., Matusovich, H., “The ROXIE Project: Service Learning + Design in a First-Year Engineering Course,” Poster Presentation at The Center for Student Engagement and Community Partnerships 14th Annual Engagement Exposition; April 15th, 2009; Virginia Tech.
- Chang, X.* and Terpenny, J.P., “Ontology-Based Data Integration and Decision Support for Product e-Design,” Flexible Automation and Intelligent Manufacturing, FAIM 2008, Skövde, Sweden, June 30-July 2, 2008.
- Paretti, M.C., Li, Y.*, McNair, L.D., Moore-Russo, D., Terpenny, J.P., “Work-In-Progress: An Empirical Study of Virtual Dissection and Student Engagement,” 38th ASEE/IEEE Frontiers in Education Conference, October 22 – 25, 2008, Saratoga Springs, NY.
- Chang, X.* and Terpenny, J., “A Framework of Ontology-Based Heterogeneous Data Integration for Cost Management in Product Family Design,” ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2008 IDETC), 28th Computers and Information in Engineering Conference (CIE), EIM: Enterprise Information Management, August 3-6, 2008, New York.
- Tawfik, A.*, Terpenny, J.P., and Goff, R.G., “Small Interventions, Big Impacts: How Modification of Delivery Process of In-Class Activities for Freshmen Can Dramatically Improve Learning,” Division: New Engineering Educators Division, 2008 ASEE Annual Conference & Exposition, Pittsburgh, PA, June 22-28, 2008.
- Terpenny, J.P., Kesharwani, R.*, Chang, X. *, and Sullivan, W.G., “Context-Based Problems and Exercises for Teaching Engineering Economy,” Engineering Economy Division, 2008 ASEE Annual Conference & Exposition, Pittsburgh, PA, June 22-28, 2008.
- Chang, X.* and Terpenny, J.P., “Ontology-Based Method for System Thinking in Product Design,” Industrial Engineering Research Conference (IERC 2008). May 17-21, 2008. Vancouver, Canada.
- Sahin, A.* and Terpenny, J.P., “A Data Clustering Approach to Define Multiple Modular Product Platforms,” Industrial Engineering Research Conference (IERC 2008). May 17-21, 2008. Vancouver, Canada.
- Goff, R., Terpenny, J. and Wildman, T., “Improving Learning and Engagement for Students in Large Classes,” 37th ASEE/IEEE Frontiers in Education Conference, October 10 – 13, 2007, Milwaukee, WI.
- Rai, R.* and Terpenny, J., “Principles for Managing Product Obsolescence,” International Conference of Engineering Design (ICED), Paris France, August 2007.
- Terpenny, J., Goff, R., Lohani, V., Mullin, J.*, and Lo, J., “Preparing Globally and Socially Conscious Engineers: International and Human-Centered Design Projects and Activities in the First Year,” Mudd Design Workshop VI: Design and Engineering Education in the Flat World, Harvey Mudd College, 23-25 May 2007 (competitively selected participant).
- Li, Y.*, Chang, X.*, and Terpenny, J., “An Ontology for Information Representation and Integration for the Empty Container Allocation Problem,” 17th International Conference on Flexible Automation and Intelligent Manufacturing (2007 FAIM), Philadelphia, PA, June 18-20, 2007.
- Chang, X.*, Sahin, A.*, and Terpenny, J., “Ontology based Graphical Modeling Tool for Product Conceptual Design,” 17th International Conference on Flexible Automation and Intelligent Manufacturing (2007 FAIM), Philadelphia, PA, June 18-20, 2007.
- Rai, R.*, Sahin, A.*, Studd, A.*, and Terpenny, J., “Undergraduate Learning Experiences Through Research in Emerging Areas of Engineering Design: Product Platform Planning and Design for Managing Product Obsolescence,” Division: Design in Engineering Education Division, 2007 ASEE Annual Conference & Exposition, Hawaii, June 24-27, 2007.
- Gabauer, D.*, Bayse, T. *, Terpenny, J., and Goff, R., AC 2007-2175: “Improving Engineering Design Instruction through Lessons Learned from FIRST Lego League Mentoring,” Division: Design in Engineering Education Division, 2007 ASEE Annual Conference & Exposition, Hawaii, June 24-27, 2007.
- Richter, D. *, Johnson, K. *, Terpenny, J., and Goff, R., AC 2007-2224: “Mentoring FIRST LEGO League: Challenges and Rewards of Working with Youth,” Division: Mechanical Engineering Division, 2007 ASEE Annual Conference & Exposition, Hawaii, June 24-27, 2007.
- Terpenny, J., Dancey, C., Goff, R., Nelson, D., Ellis, M., and Hong, D., AC 2007-2375: “Success Strategies for Capstone Design Courses with Large Classes, Diverse Project Types, Small to Large Student Teams, and Varied Faculty Interests and Approaches,” Division: Design in Engineering Education Division, 2007 ASEE Annual Conference & Exposition, Hawaii, June 24-27, 2007.
- Sterk, D. *, Thacker, T. *, Tranter, B. *, Goff, R., and Terpenny, J., AC 2007-2065: “Teaching and Mentoring for the Research Experiences for Undergraduates in Power Electronics,” Division: Electrical & Computer Engineering Division, 2007 ASEE Annual Conference & Exposition, Hawaii, June 24-27, 2007.
- Jones, J. *, Goff, R., and Terpenny, J., AC 2007-2156: “Design of Thermal Systems Using Optimization and Metaheuristic Methods,” Division: Design in Engineering Education Division, 2007 ASEE Annual Conference & Exposition, Hawaii, June 24-27, 2007.
- Moon, S. K. *, Chang, X. *, Terpenny, J.P., Simpson, T.W., and Kumara, S.R., “Toward a Knowledge Support System for Product Family Design,” World Conference on Mass Customization & Personalization (MCPC) 07, October 2007, Boston, MA...
- Terpenny, J., Goff, R., and Dancey, C., “Achieving Uniform Content, Deliverables and Assessment in a Capstone Design Course Having Many Diverse Projects, Advisors and Teams,” National Capstone Design Course Conference, June 13-15, 2007, Boulder, Colorado.
- Chang, X.*, Rai, R.*, and Terpenny, J., “Design for Manufacturing (DfM) Ontology: Implementation of a Mechanical Assembly Through Welding Process,” Session: Engineering Design Process: Methods, Representations, and Decision Making, Industrial Engineering Research Conference (IERC) and IIE Annual Conference and Expo 2007, Nashville, May 19-23, 2007.
- Sahin, A.* and Terpenny, J., “CP3: Comprehensive Product Platform Planning,” Session: Engineering Design Process: Methods, Representations, and Decision Making, Industrial Engineering Research Conference (IERC) and IIE Annual Conference and Expo 2007, Nashville, May 19-23, 2007.
- Sahin, A. * and Terpenny, J. “A Graphical Modeling Tool and a Tutorial for Conceptualizing Modular Products,” International Design Research Symposium, Seoul, South Korea, November 10-11, 2006.
- Wang, J. *, Fan, Z. *, Terpenny, J., and Goodman, E. “Integrated and Innovative Design Automation of Mechatronic Systems,” 2006 Genetic and Evolutionary Computation Conference (GECCO-2006), Seattle, WA, July 8-12, 2006 (presentation only).
- Kasarda, M., Terpenny, J., Inman, D., Precoda, K., Jelesko, J., Sahin, A. *, and Park, J. *, “Design for ADaptability (DFAD) – A New Concept for Achieving Sustainable Design,” The 16th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), June 26-28, 2006, University of Limerick, Limerick, Ireland.
- Sahin, A. *, Terpenny, J, Simpson, T., Shooter, S., and Stone, R., “Evaluating Relative Instructional Effectiveness and Efficiencies of Design Activities for Product Platform Planning,” 2006 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2006 DETC), 18th International Design Theory and Methodology (DTM) Conference, Philadelphia, September 10-13, 2006.
- Sahin, A. *, Terpenny, J. and Goff, R., “An Interactive Modeling Environment for Conceptualizing Modular Product Families,” 2006 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2006 DETC), 32nd Design Automation Conference (DAC), Philadelphia, September 10-13, 2006.
- Hutcheson, R. *, Jordan, R. *, Stone, R., Terpenny, J., and Chang, X. *, “Application of a Genetic Algorithm to Concept Variant Selection,” 2006 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2006 DETC), 18th International Design Theory and Methodology (DTM) Conference, Philadelphia, September 10-13, 2006.
- Sahin, A. *, Terpenny, J., Shooter, S., Stone, R., and Simpson, T., “A Conceptual Method to Evaluate Relative Instructional Efficiencies of Case Studies for Product Platform Planning”, Industrial Engineering Research Conference, Orlando, May 20-24, 2006.
- Sahin, A. *, Van Aken, E. M., Terpenny, J., “A Case Application for Conceptualizing Product Families in an Engineering-to-Order Company”, Industrial Engineering Research Conference, Orlando, May 20-24, 2006 (presentation only).
- Lukman, H. *, Shooter, S., Terpenny, J., Simpson, T., Stone, R. and Kumara, S., “An Inter-University Collaborative Undergraduate Research/Learning Experience for Product Platform Planning: Year 2,” ASEE Annual Conference & Exposition, Chicago, June 18-21, 2006.
- Sahin, A. *, Terpenny, J., Shooter, S., Stone, R., and Simpson, T., “A Method to Evaluate Relative Instructional Efficiencies of Design Activities for Product Platform Planning,” ASEE Annual Conference & Exposition, Chicago, June 18-21, 2006.
- Goff, R.M. and Terpenny, J.P., “Capstone Design, Mechanical Engineering Project or Personnel Management Challenge?,” ASEE Annual Conference & Exposition, Chicago, June 18-21, 2006.
- Goff, R.M., Terpenny, J.P., Vernon, M.R., Green, W.R., “Evolution of Student Perception in a Human Centered Interdisciplinary Design Project,” Frontiers in Education Conference, October 28-31, 2006, San Diego.
- Sahin, A. * and Terpenny, J., “A Modeling Environment For Conceptual Modular Product Family and Platform Planning,” Flexible Automation and Intelligent Manufacturing (FAIM) Conference, Limerick, Ireland, June 26-28, 2006.
- Park, J. *, Chang, X. *, and Terpenny, J., “Toward An Activity-Based Cost Ontology for Product Family Planning,” Industrial Engineering Research Conference, Orlando, May 20-24, 2006.
- Goff, R.M., Terpenny, J.P, Vernon, M.R., Green, W.R., and Vorster, C.R., “Work in Progress – Interdisciplinary Design of Assistive Technology for the Third World,” Frontiers in Education Conference, October 19-22, 2005, Indianapolis.
- Goff, R.M., Terpenny, J.P., Vernon, M. and Green, W., “A Conversation for Collaboration – A panel presentation of the evolution of a nine year interdisciplinary design project from toys to assistive technology,” Integrations: Liberal Learning in a Diverse World. Oct 6-9, 2005 at the Hyatt in Fairfax, VA.
- Terpenny, J.P. and Goff, R.M., “Preparing Future Faculty for Teaching Engineering Design,” 2005 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2005 DETC), 17th International Design Theory and Methodology (DTM) Conference, Long Beach, CA, September 24-28, 2005.
- Jordan, Jr., R.L. *, Van Wie, M. *, Stone, R.B., Wang, J. *, Terpenny, J.P., “A Group Technology Based Representation for Product Portfolios,” 2005 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2005 DETC), 31st Design Automation Conference, Long Beach, CA, September 24-28, 2005.
- Srinivasan, A. *, Terpenny, J., Shooter, S., Stone, R., Simpson, T., and Kumara, S., “Online Case Studies and a Process Description for Product Platform Planning,” 2005 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2005 DETC), 17th International Design Theory and Methodology (DTM) Conference, Long Beach, CA, September 24-28, 2005.
- Van Wie, M. *, Stone, R.B., Sahin, A. *, Terpenny, J.P., Alizon, F. *, Shooter, S., and Simpson, T., “A Qualitative Modeling Method for Platform Design,” IEEE International Conference on Information Reuse and Integration (IEEE IRI-2005), Las Vegas, Nevada, August 15-17, 2005.
- Srinivasan, A. *, Terpenny, J., Shooter, S., Stone, R., Simpson, T., and Kumara, S., “An Online Learning Tool for Product Platform Planning,” ASEE Annual Conference & Exposition, Portland, Oregon, June 12-15, 2005, Session 1625.
- Terpenny, J. and Goff, R., “Design in Engineering Education and Practice,” ASEE Annual Conference & Exposition, Portland, Oregon, June 12-15, 2005, Session 3255
- Simpson, T., Stone, R., Shooter, S., Terpenny, J., and Kumara, S. “An Inter-University Collaborative Undergraduate Research/Learning Experience for Product Platform Planning,” ASEE Annual Conference & Exposition, Portland, Oregon, June 12-15, 2005, Session 3425.
- Griffin, Jr., O.H., Aning, A., Lohani, V., Kampe, J., Goff, R., Paretti, M., Alley, M., Lo, J., Terpenny, J., Walker, T., and Aref, H., “Designing and Implementing Graduate Programs in Engineering Education,” ASEE Annual Conference & Exposition, Portland, Oregon, June 12-15, 2005, Session 3255.
- Terpenny, J.P. and Goff, R.M., “Utilizing Assistive Technology Design Projects and Interdisciplinary Teams to Foster Inquiry and Learning in Engineering Design,” Mudd Design Workshop V: Learning and Engineering Design, Harvey Mudd College, 19–21 May 2005 (competitively selected participant).
- Verma, A. * and Terpenny, J., “Dynamic Project Management: A Principal – Agent Based Approach,” Industrial Engineering Research Conference, Atlanta, Georgia, May 14 – 18, 2005.
- Sahin, A. *, Terpenny, J., Van Wie, M. *, and Stone, R.B., “A Proposed Knowledge Management Environment and Its Assessment for Product and Product Family Conceptual Design, International Conference on e-Design, May 14, 2005, Atlanta.
- Needy, K., Terpenny, J., Gokhan, N. *, and Josias, C. *, “On the Development of a Process for Design for Supply Chain,” International Conference on e-Design, May 14, 2005, Atlanta.
- Shooter, S., Simpson, T., Stone, R., Terpenny, J. and Kumara, S., “Toward an Information Management Infrastructure for Product Family Planning and Platform Customization,” 2004 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2004 DETC), 30th Design Automation Conference, September 28 – October 2, Salt Lake City, Utah.
- Terpenny, J.P. and Mathew, D. *, “Modeling Environment for Function-Based Conceptual Design,” 2004 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2004 DETC), 30th Design Automation Conference, September 28 – October 2, Salt Lake City, Utah.
- Wang, J. *, Terpenny, J.P., and Nnaji, B.O. “Interactive Preference Incorporation in User-Centered Product Development,” 2004 Industrial Engineering Research Conference (IERC), Houston, Texas, May 15 – 19, 2004.
- Josias, C. *, Terpenny, J.P., and McLean, K., “Component Obsolescence Risk Assessment,” 2004 Industrial Engineering Research Conference (IERC), Houston, Texas, May 15 – 19, 2004, CD-Rom Session 32C Manufacturing Optimization.
- Sullivan, W.G. and Terpenny, J.P. “Why Teach Depreciation and Income Taxes?” 2004 ASEE Annual Conference, Salt Lake City, Utah, June 20-23, 2004.
- Sikand, A. * and Terpenny, J.P. “A Web-Based Environment for Managing Product Knowledge,” International Symposium on Collaborative Technologies and Systems (CTSO 4), San Diego, January 18-23, 2004.
- Wang, J. * and Terpenny, J.P. “Integrated Active and Passive Mechatronic System Design Using Bond Graphs and Genetic Programming,” 2003 Genetic and Evolutionary Computation Conference (GECCO-2003), Late Breaking Paper, Chicago, July 12-16, 2003.
- Gralinski, T. and Terpenny, J.P. “K-12 and University Collaboration: A Vehicle to Improve Curriculum and Female Enrollment in Engineering and Technology,” 2003 ASEE Annual Conference, Nashville, Tennessee, June 22-25, 2003, CD-Rom Session 2692, 1-9.
- Terpenny, J., Ambs, L., Dixon, J., Sullivan, J. * and Sullivan, W. “The Engineering Economics of Energy Use and Capital Investment,” 2003 ASEE Annual Conference, Nashville, Tennessee, June 22-25, 2003, CD-Rom Session 2139, 1-22.
- Wang, J. * and Terpenny, J.P., “An Evolutionary Design Infrastructure for Rapid Prototyping of Customized E- Design of Mechatronic Products,” 2003 Industrial Engineering Research Conference (IERC), Portland, Oregon, May 18-21, 2003.
- Sward, K. *, Terpenny, J., and Sullivan, W.G., “Design, Layout, and Tools for Effective Web-based Instruction,” 2002 Frontiers in Education Conference, Boston, Massachusetts, November 6-9, 2002, Session S1E: Web Applications V – Online Learning, 1-6.
- Wang, J. * and Terpenny, J.P., “Investigating Baldwin Effect in Design Synthesis of Dynamic Systems,” 2002 Genetic and Evolutionary Computation Conference (GECCO-2002), Learning and Adaptation in Evolutionary Computation Workshop Program, New York, July 9-13, 2002, 170-173.
- Terpenny, J.P., Sullivan, W.G., Singh, H. *, and Sward, K. *, “Utilizing the Internet to Improve Student Learning in a First Course in Engineering Economy with Real-World Unsolved Problems in Collaboration with Industry”, Proceedings ASEE 2002 Conference and Exposition, Montréal, Quebec, Canada, June 16-19, 2002, CD-Rom Session 2139, 1-17. Also present at conference. (Winner of best paper award in Engineering Economy Division, first runner up in Professional Interest Council III.)
- Wang, J. * and Terpenny, J.P. “Adapting Trade-off strategies in Fuzzy Set-Based Engineering Design,” Proceedings Artificial Neural Networks In Engineering Conference ANNIE-2001, St. Louis, Missouri, Nov. 4-7, 2001, 325-330 (best paper nominee).
- Sullivan, W.G. and Terpenny, J.P., “A Virtual Classroom Experiment for Teaching the Economic Principles of Engineering Design,” Proceedings 31st ASEE/IEEE Frontiers in Education Conference, October 10 – 13, 2001 Reno, Nevada, Session F2F, 18.
- Benson, M. * and Terpenny, J.P., “A Survey of Methods and Approaches to Knowledge Management in the Product Development Environment,” Proceedings 21st ASME Design Engineering Technical Conferences (DETC), 21st Computers and Information in Engineering Conference, September 9-12, 2001, CD-Rom Session CIE 21288, 1-9.
- Sikand, A. * and Terpenny, J.P., “Collaborative and Distributed Design: Current Status and Research Opportunities,” Proceedings Flexible Automation and Intelligent Manufacturing (FAIM) International Conference, Dublin, Ireland, July 16-18, 2001, 389-398.
- Terpenny, J., Gao, R., Ritter, J., Fisher, D., Krishnamurty, S., “Senior Design Projects to Aid the Disabled,” Proceedings ASEE 2001 Conference and Exposition, Albuquerque, New Mexico, June 24-27, 2001, CD-Rom Session 2325, 1-11. Also presented at conference.
- Terpenny, J.P., Sward, K. *, and Sullivan, W.G., “A Virtual Classroom for Teaching the Economic Principles of Engineering Design,” Proceedings ASEE 2001 Conference and Exposition, Albuquerque, New Mexico, June 24-27, 2001, CD-Rom Session 3542, 1-15. Also presented at conference.
- Wang, J. * and Terpenny, J.P., “Agent-based Solution Synthesis Based on Imprecise Information During Preliminary Engineering Design Process,” Proceedings 10th Annual Industrial Engineering Research Conference IERC-2001, Dallas, Texas, May 20-22, 2001, CD-Rom Session Design 3, 1-6.
- Wang, J. * and Terpenny, J.P., “Multi-agent Co-evolutionary Methods for Coordinating Integrated Production Process Planning and Scheduling,” Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop, Las Vegas, Nevada, July 8, 2000, 312-315.
- Terpenny, J.P., Strong, S., and Wang, J. *, “A Methodology for Knowledge Discovery and Classifi-cation,” Proceedings of the Tenth FAIM 2000 – Flexible Automation And Intelligent Manufacturing Conference, University of Maryland, College Park, Maryland, June 26-28, 2000, 22-32.
- Terpenny, J.P., Nnaji, B.O., and Bohn, J.H., “Blending Top-Down and Bottom-Up Approaches in Conceptual Design”. Proceedings of the Seventh Industrial Engineering Research Conference, Banff, Canada, May 9-10, 1998, CD-Rom Track 7-G Modeling in Design, 1-7. Also presented at conference.
- Terpenny, J.P., “An Integrated System for Functional Modeling and Configuration in Conceptual Design”. Proceedings of the Seventh International Flexible Automation and Intelligent Manufacturing Conference, Middlesbrough, U.K., June 25-27, 1997, 69-80. Also presented at conference.
- Terpenny, J.P. and Nnaji, B.O., “Feature Based Design Evaluation for Machine/Tool Selection for Sheet Metal”. Proceedings of the Second Industrial Engineering Research Conference, Los Angeles, CA, May 26-27, 1993, 26-30.
- Deisenroth, M.P., Terpenny, J.P. and Eyada, O.K., “Design for Competitiveness: Case Studies Developed in Concurrent Engineering and Design for Manufacturability”. Proceedings of the ASME Winter Annual Meeting, Design for Manufacture, Anaheim, CA, USA, November 8-13, 1992, Design Engineering Division DE, v 51, 29-34.
- Terpenny, J.P. and Deisenroth, M.P., “A Concurrent Engineering Framework: Three Basic Components”. Proceedings of the Second International Flexible Automation and Information Management Conference, Falls Church, VA, June 30 – July 2, 1992, 237-247. Also presented at conference.
- Russell, R.R., Huang, P.H., and Leu, Y.Y., “The Effect of Single and Dual Resource Flexibilities on the Performance of Functional Versus Cellular Layouts”. Factory Automation and Information Management International Conference, University of Limerick, Ireland, March 1991. Presented in authors’ absence.
- Terpenny, J.P. and Davis, R.P., “Postoptimality Analysis for Resource Allocation Problems”. Computers and Industrial Engineering Conference, Orlando, March 1982 (invited).
Publications by Category