Graham, A., and Thole, K. A., “Flowfield Measurements in a Ribbed Channel Relevant to Internal Turbine Blade Cooling,” GT2004-53361.Sewall, E. A., Tafti, D. K., Graham, A., Thole, K. A., 2006, “Experimental Validation of Large Eddy Simulations of Flow and Heat Transfer in a Stationary Ribbed Duct,” International Journal of Heat and Fluid Flow, vol. 27, Issue 2, pp. 243-258.
Thrift, A. A., Brumbaugh, S., Thole, K. A., Kohli, A., 2010, “A Methodology to Measure Aerodynamic Forces on Cylinders in Channel Flow,” Journal of Fluids Engineering, vol. 132, pp. 081401.
Ostanek, J., Thole, K. A., Prausa, J., and Van Suetendael, A., 2010, “Establishing a Methodology for Resolving Convective Heat Transfer from Complex Geometries,” Journal of Turbomachinery, vol. 132, pp. 031014.
Lyall, M. E., Thrift, A. A., Thole, K. A., and Kohli, A., 2011, “Heat Transfer from Low Aspect Ratio Pin Fins,” Journal of Turbomachinery, vol. 133, pp. 011001.
Cardwell, N. D., Vlachos, P. P., Thole, K. A., 2011, “Developing and Fully Developed Turbulent Flow in Ribbed Channels,” Experiments in Fluids, vol. 50, pp. 1357-1371.
Lawson, S. A. and Thole, K. A., 2011, “Effects of Simulated Particle Deposition on Film Cooling,” Journal of Turbomachinery, vol. 133, pp. 021009 (Best Paper Award for Gas Turbine Heat Transfer).
Cardwell, N. D., Vlachos, P. P., Thole, K. A., 2011, “A Method for Identifying and Visualizing Foreign Particle Motion Using Time Resolved Particle Tracking Velocimetry,” Journal of Turbomachinery, vol. 133, pp. 021021.
Lawson, S. A., Thrift, A. A., Thole, K. A., Kohli, A., 2011 “Heat Transfer from Multiple Row Arrays of Low Aspect Ratio Pin Fins,” International Journal of Heat and Mass Transfer, vol. 54, pp. 4099-4109.
Ostanek, J. K. and Thole, K. A., 2012, “Wake Development in Staggered Short Cylinder Arrays within a Channel,” Experiments in Fluids, vol. 53, pp. 673–697.
Ostanek, J. and Thole, K. A., 2012, “Flowfield Measurements in a Single Row of Low Aspect Ratio Pin-Fins,” Journal of Turbomachinery, vol. 134, pp 051034.
Ostanek, J., Thole, K. A., 2012, “Effect of Streamwise Spacing on Periodic and Random Unsteadiness in a Bundle of Short Cylinders Confined in a Channel,” Experiments in Fluids, vol. 53, pp. 1779-1796.
Kirsch, K.L., Ostanek, J. K., and Thole, K. A., 2013, “Comparison of Pin Surface Heat Transfer in Arrays of Oblong and Cylindrical Pin Fins,” Journal of Turbomachinery, vol. 136, pp 041015.
Kirsch, K. L. and Thole, K. A., 2015 “Heat Transfer Measurements of Oblong Pins,” Journal of Turbomachinery, vol. 137, pp 071004.
Cory, T., Edelson, R., and Thole, K. A., Tyler, V., Quach, S. and Mongillo, D., 2022, “Impact of Ceramic Matrix Composite Topology on Friction Factor and Heat Transfer,” J of Turbomachinery, vol 144 (3), pp. 031003.
Thole, K. A., Lynch, S. P. and Wildgoose, A. J., 2021, “Review of Advances in Convective Heat Transfer Developed through Additive Manufacturing,” Advances in Heat Transfer, https://doi.org/10.1016/bs.aiht.2021.06.004 (invited review to appear in November 2021)