PSU SEDTAPP – Solar Powered Cooling Team 1

Energy Engineering, Mechanical Engineering, People’s Choice - Best Project

🏆 Winner: People’s Choice Best Project PSU SEDTAPP requested that a solar-powered cooling system be developed to cool a living space during hot summer climates. Sponsor PSU SEDTAPP   Team Members Ross Fox | Riyad Althaqeb | Abdullelah Alarfaj | John Pavlakovic |...

New Plunger Design for Natural Gas Application

Energy Engineering, Industrial Engineering, Mechanical Engineering

This project’s focus is to design a new version of Well Master Corporation’s Talon Ball & Sleeve plunger that can seal at a diameter of 1.995” and still pass through the restricted diameter of 1.875”. Sponsor Well Master Corporation   Team Members Ameer...

Boeing Aircraft Redesign Project

Electrical Engineering, Energy Engineering, Industrial Engineering

The objective of this project was to perform conceptual design studies to retrofit a legacy aircraft with an electric propulsion system. Sponsor The Boeing Company   Team Members Nicholas Hill | Brandon Lindgren | Daniel Orr | Mina Rodopman | Fangda Wei | Brandon...

Fine Material Flow Dispersion Velocity Optimization and Wear Reduction in a Vertical Roller Mill

Energy Engineering

The objective of this project was to reduce wear on a retrofit design on a vertical roller mill to reduce the frequency of maintenance. Sponsor Bridge Gap Engineering LLC   Team Members Ryan Wolf | Brianna Shero | Michael Martino | Mert Ozkal | Jerrod Anthony |...

Waste Heat Recovery for Fuel Cells

Energy Engineering, Engineering Design, Mechanical Engineering

The objective of this project is to design and simulate a system that captures low-temperature waste heat from a fuel cell and recovers it in the form of usable energy. Sponsor Volvo Penta   Team Members Chinmay Gupta | Jesper Lidqvist | Shreya Manoj | Justus...

Design and Development of 3D Printed Unmanned Aerial Vehicles for Virtual Surveyal of Victims Trapped in Burning Structures

Electrical Engineering, Energy Engineering, Industrial Engineering, Material Science & Engineering, Mechanical Engineering

The objective of this project is to design and manufacture a 3D printed, 5G controlled drone that is able to survey the interior of a burning building and help locate and guide victims to safety. Sponsor Simon Miller   Team Members Jared Sable | Gregory Vutera |...