2024:
Corbett, T. and Thole, K. A., 2024, “Large Eddy Simulations of Kagome and Body Centered Cubic Lattice Cells,” International Journal of Heat and Mass Transfer, vol. 218, pp. 124808.
Corbett, T., Thole, K. A., Ryan, D., Bollapragada, S., 2024, “Impacts of Superalloys on the Surface Quality of Additively Manufactured Channels,” J of Turbomachinery, vol. 146 (8), pp. 081003.
McCormack, K., Gailey, N., Berdanier, R., Barringer, M., and Thole, K. A., 2024, “Quantifying Part-to-Part Variations and Cooling Effectiveness in Engine-Run Blades, Journal of Turbomachinery, vol.146(1), pp. 011002.
Veley, E. and Thole, K. A., Bogard, D. G., 2024, “The Effects of Channel Supplies on Overall Film-Cooling Effectiveness”, vol. 146 (3), pp. 031006.
Wildgoose, A. J., Thole, K. A., Tuneskog, E., and Wang, L., 2024, “Roughness Related to Cooling Performance of Channels Made through Additive Manufacturing,” J of Turbomachinery, vol. 146 (5), pp. 051008.
2023:
Altland, S., Yang, X., Thole, K. A., Kunz, R. F., McClain, S., 2023, “Applications of a Distribution Element Roughness Model to Additively Manufactured Internal Cooling Channels,” Journal of Turbomachinery, vol.145(10), pp. 101004.
Banko, A. J., Benson, M. J., Davidson, F. T., Zia, W., Bordbar, Al, Boyce, C., Veley, E., and Thole, K. A., “ Effects of Surface Roughness on Three-Dimensional Flow Structure within Shaped Film Cooling Holes,” GT2023-104073.
Corbett, T.M., Thole, K. A., Sudhakar, B., 2023, “Amplitude and Wavelength Effects for Wavy Channels,” J. of Turbomachinery, vol. 145(3), pp. 031011
Corbett, T. M., Thole, K. A., Sudhakar, B., 2023, “Impacts of Pin Fin Shape and Spacing on Heat Transfer and Pressure Losses,” J. of Turbomachinery, vol. 145(5), pp. 051014.
DeShong, E. T., Berdanier, R. A., and Thole, K. A., 2023, “Predictive Modelling of Local Film-Cooling Flow on a Turbine Rotor Blade,” J. of Turbomachinery, vol. 145(4), pp. 041014.
Dharmadhikari, S., Berdanier, R. A., Thole, K. A., and Basak, A., “An Automated Gaussian Process Integrated with Bayesian Optimization Approach to Designing Spline-Based Pin-Fin Arrays,” GT2023-102018.
Edelson, R. and Thole, K. A., 2023, “Impact of Ceramic Matrix Composite Topology on Overall Effectiveness,” J. of Turbomachinery, vol. 143, pp. 0311016.
Fallon, B., McFerran, K., Fox, S., Thole, K. A., Lynch, S. P., Lundgreen, R., and Kramer, S., “Comparison of Dirt Deposition on Double-Walled Combustor Liner Geometries,” GT2023-102635.
Knisely, B. F., Berdanier, R. A., Wagner, J. H., Thole, K. A., Arisi, A. N., and Haldeman, C. W., 2023, “Effects of Part-to-Part Flow Variations on Overall Effectiveness and Life of Rotating Turbine Blades,” Journal of Turbomachinery, vol. 145 (6), pp. 061016.
Monge-Concepcion, I., Berdanier, R. A., Barringer, M. D., Thole, K. A., 2023, “Use of Multiple Tracer Gases to Quantify Vane Trailing Edge Flow into Turbine Rim Seals,” J. of Turbomachinery, vol. 145, pp. 011006.
Rozman, M., Berdanier, R. A., Barringer, M. D., Thole, K. A., “Strategies for High-Accuracy Measurements of Stage Efficiency for a Cooled Turbine,” GT2023-100642.
Rozman, M., DeShong, E. T., Thole, K. A., Berdanier, R. A., Robak, C., 2023, “Characterizing Flow Instabilities During Transient Events in the Turbine Rim Seal Cavity”, J. of Turbomachinery, vol. 145(3), pp. 031014.
Thole, K. A. and Fishbone, S., 2023 “Additive Manufacturing Benefits and Challenges in Developing Turbine Technologies,” vol. 145 (3), ASME ME Magazine.
Veley, E. and Thole, K. A., 2023, “Cooling Performance of Film-Cooling Holes Fed by Channels of Various Shapes”, International Journal of Heat and Mass Transfer, vol. 216, pp. 124561.
Veley, E. M., Thole, K. A., Furgeson, M. T., and Bogard, D. G., 2023, “Printability and Overall Cooling Performance of Additively Manufactured Holes With Inlet and Exit Rounding,” J. of Turbomachinery, vol. 145(3), pp. 031017.
Wilkins, P. H., Lynch, S. P., Thole, K. A., Vincent, T., Quach, S., and Kaufman, E., 2022, “Experimental Investigation into the Effect of a Ceramic Matrix Composite Surface on Film Cooling,” J. of Turbomachinery, vol. 144, pp. 121006.
Wilkins, P. H., Lynch, S. P., Thole, K. A. “The Impact of Multi-Scale Ceramic Matrix Composite Roughness on Heat Transfer and Boundary Layer Development,” GT2023-102031.
Wildgoose, A. and Thole, K. A., 2023, “Heat Transfer and Pressure Loss of Additively Manufactured Internal Cooling Channels with Various Shapes,” Journal of Turbomachinery vol. 145(7), pp. 071011.
Wildgoose, A. and Thole, K. A., 2023, “Influences of Laser Incidence Angle and Wall Thickness on Additive Components,” Journal of Turbomachinery vol. 145(10), pp. 104501.
Wildgoose A. J., Thole K. A. (2023). Variability in additively manufactured turbine cooling features. Journal of the Global Power and Propulsion Society. Special Issue: Some Advantages in Additive Manufacturing for Aerothermal Technologies: 1–16.
Wildgoose, A. J., Thole, K. A., Subramanian, R., Kersting, L., Kulkarni, A., 2023, “Impacts of the Additive Manufacturing Process on the Roughness of Engine Scale Vanes and Cooling Channels,” Journal of Turbomachinery, vol. 145 (4), pp 041013.
2022:
Costa, H., Profito, F., Zhang, X., and Thole, K. A., 2022, “Optimizing the surface of manufactured components for friction, adhesion, and convective heat transfer,” MRS Bulletin, MRSB-D-22-00180R1.
Corbett, T. M., Thole, K. Al, Sudhakar, B., “Impacts of Pin Fin Shape and Spacing on Heat Transfer and Pressure Losses,” GT2022-82673.
Corbett, T. M., Thole, K. A., Sudhakar, B., “Amplitude and Wavelength Effects for Wavy Channels”, GT2022-78356.
Cory, T., Edelson, R., and Thole, K. A., Tyler, V., Quach, S. and Mongillo, D., 2022, “Impact of Ceramic Matrix Composite Topology on Friction Factor and Heat Transfer,” J of Turbomachinery, vol. 144(3), pp. 031003.
DeShong, E. T., Peters, B., Paynabar, K., Gebraeel, N., Thole, K. A., Berdanier, R. A., 2022, “Applying Infrared Thermography as a Methods for On-Line Monitoring of Turbine Blade Coolant Flow,” J. of Turbomachinery, vol. 144(1), pp. 111009.
DeShong, E., Siroka, S., Berdanier, R., Thole, K. A., 2022, “Evaluating the Influence of Rotor-Casing Eccentricity on Turbine Efficiency Including Time-Resolved Flow Field Measurements,” J of Turbomachinery, vol. 144(2), pp. 021012.
DeShong, E. T., Berdanier, R. A., and Thole, K. A., “Predictive Modelling of Local Film-Cooling Flow on a Turbine Rotor Blade,” GT2022-82507.
DeShong, E, Peters, B., Berdanier, R., Thole, K., Paynabar, K. and Gebraeel, N., 2022, “Correlating Time-Resolved Pressure Measurements with Rim Sealing Effectiveness for Real-Time Turbine Health Monitoring”, J of Turbomachinery, vol.144(6), pp. 061004.
Edelson, R. and Thole, K. A., “Impact of Ceramic Matrix Composite Topology on Overall Effectiveness,” GT2022-82326.
Furgeson, M. T., Veley, E. M., Yoon, C., Gutierrez, D., Bogard, D. G., and Thole, K. A., “Development and Evaluation of Shaped Film Cooling Holes Designed for Additive Manufacturing,” GT2022-83201.
Gutierrez, D., Yoon, C., Furgeson, M. T., Veley, E. M., Bogard, D. G., and Thole, K. A., “Evaluation of Adjoint Optimized Hole – Part I Baseline Performance,” GT2022-83436.
Knisely, B. F., Berdanier, R. A., Wagner, J. H., Thole, K. A., Arisi, A. N., and Haldeman, C. W., “Effects of Part-to-Part Flow Variations on Overall Effectiveness and Life of Rotating Turbine Blades,” GT2022-83216.
Lundburg, E., Lynch, S., Liu, K., Xu, H., & Fox, M. (2022). “The effect of diffuser shape for film cooling holes with constant expansion angles and area ratio.” Proceedings of the 2022 ASME IGTI Turbo Expo. ASME Paper GT2022-81520.
Lynch, S., & Boggio, M. (2022). “Computational analysis of rotating detonation engine exhaust interacting with a turbine vane.” Proceedings of the AIAA SciTech 2022 Forum. AIAA Paper 2022-1720.
Mekki, B., & Lynch, S. (2022). “Voxel based three-dimensional topology optimization of heat exchanger fins.” Proceedings of the AIAA SciTech 2022 Forum. AIAA Paper 2022-2445.
Monge-Concepcion, I., Siroka, S., Berdanier, R., Barringer, M., Thole, K., Robak, C., 2022, “Influence of Vane Trailing Edge Flow on the Formation of Cavity Cells and Rim Sealing”, J of Turbomachinery.
Monge-Concepcion, I., Berdanier, R. A., Barringer, M. D., Thole, K. A., “Use of Multiple Tracer Gases to Quantify Vane Trailing Edge Flow into Turbine Rim Seals,” GT2022-83247.
Rozman, M., DeShong, E. T., Thole, K. A., Berdanier, R. A., Robak, C., 2023, “Characterizing Flow Instabilities During Transient Events in the Turbine Rim Seal Cavity”, J of Turbomachinery, vol. 145(3), pp. 031014.
Saltzman, D., & Lynch, S. (2022). “Overall pressure loss and heat transfer performance of additively manufactured offset strip fins used in compact heat exchangers.” Journal of Thermal Science and Engineering Applications.
Schroeder, R. P., and Thole, K. A., 2022, “Adiabatic Effectiveness Measurements for a Baseline Shaped Film Cooling Hole,” J. of Turbomachinery, vol. 144(12), pp. 121003.
Siroka, S., Berdanier, R. A., & Thole, K. A., 2022, “Two-layer transient heat transfer using impulse response methods. International Journal of Heat and Mass Transfer,” 187, 122511.
Siroka, S., Berdanier, R. A., Thole, K. A., 2022, “Development of Coated Heat Flux Gauges for Fast Responding Measurements,” Measurement Science and Technology, vol. 33, pp. 045104.
Stafford, G., McClain, S., Hanson, D.R., Kunz, R. F., Thole, K. A., 2022, “Convection in Scaled Turbine Internal Cooling Passages with Additive Manufacturing Roughness,” J of Turbomachinery, vol. 144(4), pp. 041008.
Veley, E. M., Thole, K. A., Furgeson, M. T., and Bogard, D. G., “Printability and Overall Cooling Performance of Additive Manufactured Holes with Inlet and Exit Rounding,” GT2022-83313.
Wilkins, P. H., Lynch, S. P., Thole, K. A., Vincent, T., Quach, S., and Mongillo, D., 2022, “Effect of a Ceramic Matrix Composite Surface on Film Cooling,” J. Turbomach., vol. 144(8), pp. 081014
Wilkins, P. H., Lynch, S. P., Thole, K. A., Vincent, T., Quach, S., and Kaufman, E., “Experimental Investigation into the Effect of a Ceramic Matrix Composite Surface on Film Cooling,” GT2022-83109.
Wildgoose, A. J., Thole, K. A., Subramanian, R., Kersting, L., and Kulkarni, A., “Impacts of the additive manufacturing process on the roughness of engine scale vanes and cooling channels”, GT2022-84603.
Wildgoose, A. J. and Thole, K. A., “Heat transfer and pressure loss of additively manufactured internal cooling channels with various shapes”, GT2022-82298.
Winegardner, A., Lemay, A., Lynch, S., Thole, K., and O’Connor, J., “Energy and the University: The Role of Gas Turbines in US Universities and Strategies for Enhancing Energy Literacy,” GT2022-83102.
Xu, H., Lynch, S., & Yang, X. (2022). “Direct numerical simulation of slot film cooling downstream of misaligned plates.” Flow.
2021:
Berdanier, R. A., DeShong, E. T., Thole, K. A., Robak, 2021 “Evaluating the Effects of Transient Purge Flow on Stator-Rotor Seal Performance,” Journal of Turbomachinery, vol. 143(2), pp. 021006.
Berdanier, R.A., Fishbone, S., Thole, K.A., Brogan, J., Mantese, J.V., Martin, T.J., Kulkarni, A., Subramanian, R., Emerson, B., and Lieuwen, T.C., 2021, “Sensor Integration on Additively Manufactured Hot Section Components for Wireless Gas Turbine Prognostics,” AIAA-2021-3474.
Creer, R. M., Thole, K. A., “Influence of Opposing Dilution Jets on Effusion Cooling,” GT2021-59429.
Huelsmann, N. C., Thole, K. A., 2021, “Effects of Jet Impingement on Convective Heat Transfer in Effusion Holes,” Journal of Turbomachinery, vol. 143 (6), pp. 061011, https://doi.org/10.1115/1.4050335.
Knisely, B. F., Berdanier, R. A., Thole, K. A., Haldeman, C. W., Markham, J. R., Cosgrove, J. E., Carlson, A. E., Scire, J. J., 2021, “Acquisition and Processing Considerations for Infrared Images of Rotating Turbine Blades,” Journal of Turbomachinery, vol. 143 (4), pp. 041013.
McClain, S. T., Hanson, D. R., Cinnamon, E., Snyder, J. C., Kunz, R. F., Thole, K. A., 2021, “Flow in a Simulated Turbine Blade Cooling Channel with Spatially Varying Roughness Caused by Additive Manufacturing Orientation,” Journal of Turbomachinery, vol. 143(7), pp. 071013.
Mekki, Bashir S., Joshua Langer, and Stephen Lynch. 2021. “Genetic Algorithm Based Topology Optimization of Heat Exchanger Fins Used in Aerospace Applications.” ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 8: 121002.
Monge-Concepción, I., Siroka, S., Berdanier, R. A., Barringer, M., Thole, K. A., Robak, C., “Unsteady Turbine Rim Sealing and Vane Trailing Edge Flow Effects,” GT2021-59273.
Rao, J., & Lynch, S. (2021). “Large eddy simulation of flow and heat transfer over forward-facing steps with upstream injection.” Proceedings of the AIAA SciTech 2021 Forum. AIAA paper 2021-0161.
Robison, Z., Mosele, J.-P., Gross, A., & Lynch, S. (2021). Numerical investigation of turbulent junction flow. AIAA Journal 59(11).
Rusted, A., & Lynch, S. (2021). “Determining total pressure fields from velocimetry measurements in a transonic turbine flowfield.” Proceedings of the 2021 American Society of Mechanical Engineers (ASME) International Gas Turbine Institute (IGTI) Turbo Expo. ASME Paper GT2021-59388, Virtual Conference
Saltzman, David, and Stephen Lynch. 2021. “Flow-Field Measurements in a Metal Additively Manufactured Offset Strip Fin Array Using Laser Doppler Velocimetry.” Journal of Fluids Engineering, Transactions of the ASME 143 (4): 1–10.
Sinha, S., Lynch, S., & Meisel, N. A. (2021). “Heat transfer simulation of material extrusion additive manufacturing to predict weld strength between layers.” Additive Manufacturing 46.
Siroka, S., Foley, B., Berdanier, R. A., Thole, K. A., 2021, “Application of 3-omega method for thin-film heat flux gauge calibration,” Measurement Science and Technology, vol. 32, No. 11, pp. 114001.
Siroka, S., Monge-Concepción, I., Berdanier, R. A., Barringer, M., Thole, K. A., Robak, C., “Correlating Cavity Sealing Effectiveness to Time-Resolved Rim Seal Events in the Presence of Vane Trailing Edge Flow,” GT2021-59285.
Thole, K.A., Barringer, M., Berdanier, R.A., Fishbone, S., Wagner, J., Dennis, R., Black, J., Burke, P., Straub, D., O’Neill, F., Stimpson, C., Riahi, A. Aggarwala, A., Bradshaw, S., Kohli, A., Mongillo, D., Praisner, T., Rodriguez, J., Fox, M., and Kim, Y., 2021, “Defining a Testbed for the U.S. Turbine Industry: The National Experimental Turbine (NExT),” AIAA-2021-3489.
Thole, K. A., Lynch, S. P., Wildgoose, A., 2021, “Review of Advances in Convective Heat Transfer Developed through Additive Manufacturing” Adv in Heat Transfer, vol. 53, pp. 249-325.
Tran, T.-L., Wang, J., Byron, M., Lynch, S., & Kunz, R. (2021). “Experimental and computational studies on saltation of metal powders used in laser powder bed fusion systems for metal additive manufacturing.” Proceedings of the 2021 ASME International Mechanical Engineering Congress & Expo. ASME Paper IMECE2021-69550 (Virtual Conference)
Wilkins, P. H., Lynch, S. P., Thole, K. A., Quach, S., Vincent, T., Mongillo, D., “Effect of a Ceramic Matrix Composite Surface on Film Cooling,” GT2021-59602.
Wilkins, P. H., Lynch, S. P., Thole, K. A., Quach, S., & Vincent, T. (2021). Experimental Heat Transfer and Boundary Layer Measurements on a Ceramic Matrix Composite Surface. Journal of Turbomachinery, 1–53. https://doi.org/10.1115/1.4050314
Wildgoose, A. J., Thole, K. A., Sanders, P. Wang, L., 2021, “Impact of Additive Manufacturing on Internal Cooling Channels with Varying Diameters and Build Directions,” Journal of Turbomachinery, vol. 143 (7), pp. 071003, https://doi.org/10.1115/1.4050336.
2020:
Huelsmann, N. C., Thole, K. A., “Effects of Jet Impingement on Convective Heat Transfer in Effusion Holes,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-15577, 2020.
Knisely, B. F., Berdanier, R. A., Thole, K. A., Haldeman, C. W., Markham, J. R., Cosgrove, J. E., Carlson, A. E., Scire, J. J., “Acquisition and Processing Considerations for Infrared Images of Rotating Turbine Blades,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-15522, 2020.
Leung, S. L., Hargrove, B., Marsh, E., Gregg, A., & Thole, K., 2020, Prompting by COVID-19 to Rethink the Purpose of Engineering Laboratory Education – Develop Practical Competence to Solve Real-World Problem. Advances in Engineering Education, 8(4).
McClain, S. T., Hanson, D. R., Cinnamon, E., Snyder, J. C., Kunz, R. F., Thole, K. A., “Flow in a Simulated Turbine Blade Cooling Channel with Spatially Varying Roughness Caused by Additive Manufacturing Orientation,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-16069, 2020.
Monge-Concepción, I, Berdanier, R. A., Barringer, M. B., Thole, K. A. and Robak, C., 2020, “Evaluating the Effect of Vane Trailing Edge Flow on Turbine Rim Sealing” Journal of Turbomachinery, doi-org.ezaccess.libraries.psu.edu/10.1115/1.4047611
Siroka, S., Berdanier, R. A., Thole, K. A., Chana, K., Haldeman, C. W., and Anthony, R. J., 2020, “Comparison of Thin Film Heat Flux Gauge Technologies Emphasizing Continuous-Duration Operation,” Journal of Turbomachinery. DOI: https://doi.org/10.1115/1.4045991
Snyder, J. C. and Thole, K. A., 2020, “Effect of Additive Manufacturing Process Parameters on Turbine Cooling” Journal of Turbomachinery, vol. 142(5), pp051007.
Snyder, J. C. and Thole, K. A., 2020, “Performance of Public Film Cooling Geometries Produced through Additive Manufacturing” Journal of Turbomachinery, vol. 142(5), pp. 051009.
Snyder, J. C. and Thole, K. A., 2020, “Tailoring Surface Roughness Using Additive Manufacturing to Improve Internal Cooling, Journal of Turbomachinery, vol. 142(7), pp. 071004.
Tracy, K., Lynch, S. P., “Large Eddy Simulation of the 7-7-7 Shaped Film Cooling Hole at Axial and Compound Angle Orientations,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-14439, 2020.
White, Andrew S., David Saltzman, and Stephen Lynch. 2020. “Performance Analysis of Heat Sinks Designed for Additive Manufacturing.” International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, Proceedings of the ASME 2020, 1–9.
Wilkins, P. H., Lynch, S. P., Thole, K. A., Quach, S., Vincent, T., “Experimental Heat Transfer and Boundary Layer Measurements on a Ceramic Matrix Composite Surface,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-15053, 2020.
Wildgoose, A. J., Thole, K. A., Sanders, P., Wang, L., “Impact of Additive Manufacturing on Internal Cooling Channels with Varying Diameters and Build Directions,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-15049, 2020.
Zuccarello, J., Saltzman, D., Lynch, S. P., Haydt, S., Whitfield, C., “A Steady Transonic Linear Cascade for True Scale Cooling Measurements,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-14269, 2020.
2019:
Berdanier, R., DeShong, E., Thole, K. A., “Evaluating the Effects of Transient Purge Flow on Stator-Rotor Seal Performance,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-91654, 2019.
Bichnevicius, M., Saltzman, D., & Lynch, S., “Comparison of Additively Manufactured Louvered Plate-Fin Heat Exchangers.” Journal of Thermal Science and Engineering Applications, 12(1), 2019.
Cory, T., Thole, K. A., Kirsch, K., Lundgreen, R., Prenter, R., Kramer, S., “Impact of Dust Feed on Capture Efficiency and Deposition Patterns in a Double-Walled Liner,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-90981.
Elahi, S., Lange, E., & Lynch, S., “Experimental Measurements of Turbulent Junction Flow Using High Speed Stereo PIV and IR Thermography.” International Journal of Heat and Mass Transfer, Vol. 142, 2019.
Hanson, D., McClain, S., Snyder, J., Kunz, R., Thole, K. A., “Flow in a Scaled Turbine Coolant Channel with Roughness due to Additive Manufacturing,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-90931, 2019.
Haydt, S., & Lynch, S., “Cooling Effectiveness for a Shaped Film Cooling Hole at a Range of Compound Angles.” J. Turbomach., 141(4), 2019.
Haydt, S., & Lynch, S., “Heat Transfer Coefficient Augmentation for a Shaped Film Cooling Hole at a Range of Compound Angles.” Proceedings of the 2019 ASME IGTI Turbo Expo, Phoenix, AZ.
Mekki, B., Langer, J., & Lynch, S., “Genetic Algorithm Based Topology Optimization of Heat Exchanger Fins Used in Aerospace Applications.” Proceedings of the 2019 ASME International Mechanical Engineering Congress & Expo, Salt Lake City, UT.
Monge-Concepción, I., Berdanier, R., Barringer, M., Thole, K. A., “Evaluating the Effect of Vane Trailing Edge Flow on Turbine Rim Sealing,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-91576, 2019.
Robak, C., Faghri, A., Thole, K. A., “Analysis of Gas Turbine Rim Cavity Ingestion with Axial Purge Flow Injection,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-91807, 2019.
Siroka, S., Berdanier, R., Thole, K. A., Chana, K., Haldeman, C., Anthony, R., “Comparison of Thin Film Heat-Flux Gauge Technologies Emphasizing Continuous-Duration Operation,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-91817, 2019.
Snyder, J., Thole, K. A., “Effect of Additive Manufacturing Process Parameters on Turbine Cooling,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-90862, 2019.
Snyder, J., Thole, K. A., “Performance of Public Film Cooling Geometries Produced through Additive Manufacturing,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-90877, 2019.
Zuccarello, J., Lange, E., & Lynch, S., “Effect of Longitudinal Vortices on Turbulent Junction Flow Heat Transfer.” Proceedings of the 2019 AIAA Propulsion and Energy Conference, Indianapolis, IN.
2018:
Bichnevicius, M., Saltzman, D., & Lynch, S., “Comparison of Louvered Plate-Fin heat Exchangers Made via Additive Manufacturing.” Proceedings of the 2018 ASME International Mechanical Engineering Congress & Expo, Pittsburgh, PA.
Clark, K., Barringer, M., Johnson, D., Thole, K. A., Grover, E., and Robak, C., 2018 “Effects of Purge Flow Configuration on Sealing Effectiveness in a Rotor-Stator Cavity” Journal of Engineering for Gas Turbines and Power, vol. 140(11), pp. 112502.
Elahi, S. S., Moul, Z. K., Lange, E. A., and Lynch, S. P., “Unsteady Heat Flux Measurements of Junction Flow With Reynolds Number and Freestream Turbulence Effects,” American Institute of Aeronautics and Astronautics
Haydt, S., & Lynch, S., “Cooling Effectiveness for a Shaped Film Cooling Hole at a Range of Compound Angles.” Proceedings of the 2018 ASME IGTI Turbo Expo, Lillestrom, Norway.
Haydt, S., & Lynch, S., “Flowfield of a Shaped Film Cooling Hole Over a Range of Compound Angles.” Proceedings of the 2018 ASME IGTI Turbo Expo, Lillestrom, Norway.
Haydt, S., Lynch, S. P., and Lewis S., “The Effect of Area Ratio Change Via Increased Hole Length for Shaped Film Cooling Holes with Constant Expansion Angles,” J. Turbomach. , 140(5), p. 051002, 2018.
Kirsch, K. L. and Thole, K. A., 2018, “Numerical Optimization, Characterization, and Experimental Investigation of Additively Manufactured Communicating Microchannels” Journal of Turbomachinery, Vol. 140 (11), pp. 111003.
Kirsch, K. L. and Thole, K. A., 2018, “Isolating the Effects of Surface Roughness versus Wall Shape in Numerically Optimized, Additively Manufactured Micro Cooling Channels,” Experimental Thermal and Fluid Science, Vol. 98, p. 227-238.
Lange, E. A., Elahi, S. S., and Lynch, S. P., “Time-resolved PIV Measurements of the Effect of Freestream Turbulence on Horshoe Vortex Dynamics,” American Institute of Aeronautics and Astronautics.
Lynch, S., “Large Eddy Simulations of Low Pressure Turbine Endwall Flow and Heat Transfer.” Proceedings of the 2018 ASME International Mechanical Engineering Congress & Expo, Pittsburgh, PA.
Muirhead, K., & Lynch, S., “A Computational Study of Combustor Dilution Flow Interaction with Turbine Vanes.” Journal of Propulsion and Power, 35(1), 2018.
Saltzman, D., Bichnevicius, M., Lynch, S., Simpson, T. W., Reutzel, E., Dickman, C., & Martukanitz, R., “Experimental Comparison of a Traditionally Built Versus Additively Manufactured Aircraft Heat Exchanger.” Applied Thermal Engineering, Vol. 138, pp. 254-263, 2018.
Shrager, A., Thole, K. A., and Mongillo, D., 2018 “Effects of Effusion Cooling Pattern Near the Dilution Hole for a Double-Walled Combustor Liner – Part 1: Overall Effectiveness Measurements”, Journal of Engineering for Gas Turbines and Power, Vol. 141 (1), pp. 011022.
Shrager, A., Thole, K. A., and Mongillo, D., 2018 “Effects of Effusion Cooling Pattern Near the Dilution Hole for a Double-Walled Combustor Liner – Part 2: Flowfield Measurements”, Journal of Engineering for Gas Turbines and Power, Vol. 141 (1), pp. 011023.
Stimpson, C., Snyder, J., Thole, K. A., and Mongillo, D., 2018, “Effects of Coolant Feed Direction on Additively Manufactured Film Cooling Holes” Journal of Turbomachinery, Vol 140 (11), pp. 111001.
Town, J., Straub, D. Black, J., Thole, K. A., and Shih, T., 2018 “State-of-the-Art Cooling Technology for a Turbine Rotor Blade,” Journal of Turbomachinery, vol. 140 (7), pp. 071007.
2017:
Elahi, S. S., Lange, E. A., and Lynch S. P., “Experimental Measurements of Turbulent Junction Flow Using High Speed Stereo PIV and IR Thermography,” American Institute of Aeronautics and Astronautics.
Ferster, K. K., Kirsch, K. L., and Thole, K. A., “Effects of Geometry, Spacing, and Number of Pin Fins in Additively Manufactured Microchannel Pin Fin Arrays,” J. Turbomach. , 140(1), p. 011007., 2017.
Haydt, S., Lynch, S. P., and Lewis S., “The Effect of a Meter-Diffuser Offset on Shaped Film Cooling Hole Adiabatic Effectiveness,” J. Turbomach. , 139(9), p. 091012, 2017.
Haydt, S., Lynch, S. P., and Lewis S., “The Effect of Area Ratio Change Via Increased Hole Length for Shaped Film Cooling Holes with Constant Expansion Angles,” Conference Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, S. C., GT2017-63692.
Kirsch, K. L., and Thole, K. A., “Experimental Investigation of Numerically Optimized Wavy Microchannels Created Through Additive Manufacturing,” J. Turbomach. , 140(2), p. 021002., 2017
Kirsch, K. L., Snyder, J. C., Stimpson, C. K., Thole, K. A., and Mongillo, D., 2017, “Repeatability in Performance of Micro Cooling Geometries Manufactured with Laser Powder Bed Fusion,” 53rd AIAA/SAE/ASEE Joint Propulsion Conference, Atlanta, GA, pp. 1–14.,”
Kirsch, K.L. and Thole, K.A., 2017, Pressure Loss and Heat Transfer Performance for Additively and Conventionally Manufactured Pin Fin Arrays, International J. of Heat and Mass Transfer, vol. 108(2017), pp. 2502-2513, 2017.
Leonetti, M., Lynch, S. P., O’Connor, J., and Bradshaw S., “Combustor Dilution Hole Placement and Its Effect on the Turbine Inlet Flowfield,” Journal of Propulsion and Power , vol. 33, no. 3, pp. 750-763, 2017.
Lynch, S. P., “Three-Dimensional Boundary Layer in a Turbine Blade Passage,” Journal of Propulsion and Power, vol. 33, No. 4, pp. 954-963, 2017.
Lynch SP, Thole KA. Heat Transfer and Film Cooling on a Contoured Blade Endwall With Platform Gap Leakage. J. Turbomach. vol. 139(5), doi:10.1115/1.4035202., 2017.
Muirhead, K. and Lynch, S. P., “A Computational Study of Combustor Dilution Flow Interaction with Turbine Vanes,” American Institute of Aeronautics and Astronautics.
Saltzman, D., Bichnevicius, M., Lynch, S. P., Simpson, T. W., Reutzel, E. W., Dickman, C., and Martukanitz, R., “Experimental Comparison of a Traditionally Built versus Additively Manufactured Aircraft Heat Exchanger,” American Institute of Aeronautics and Astronautics.
Stimpson, C. K., Snyder, J. C., Thole, K. A., and Mongillo, D., “Effectiveness Measurements of Additively Manufactured Film Cooling Holes,” J. Turbomach. , 140(1), p. 011009., 2017.
2016:
Anderson, C. D., Lynch, S. P., “Time-resolved stereo PIV measurements of the horseshow vortex system at multiple locations in a low-aspect pin-fin array,” Experiments in Fluids, vol. 57, pp. 1-18, 2016.
Clark, K., Barringer, M., Thole, K. A., Clum, C,. Hiester, P., Memory, C., Robak, C., “Using a Tracer Gas to Quantify Sealing Effectiveness for Engine Realistic Rim Seals,” International Gas Turbine and Aeroengine Congress and Exposition, Seoul, South Korea, GT2016-58095, 2016.
Clark, K., Barringer, M., Thole, K. A., Clum, C,. Hiester, P., Memory, C., Robak, C., “Effects of Purge Jet Momentum on Sealing Effectiveness,” J. Eng. Gas Turbines Power, vol 139(3), pp. 031904, 2016.
Gibson, J., Thole, K. A., Christophel, J., Memory, C., Praisner, T., “Pressure Distortion Effects on Rim Seal Performance in a Linear Cascade,” International Gas Turbine and Aeroengine Congress and Exposition, Seoul, South Korea, GT2016-58098, 2016.
Haydt, S., Lynch, S. P., Lewis, S., “The Effect of Meter-Diffuser Offset on Shaped Film Cooling Hole Adiabatic Effectiveness,” ASME paper GT2016-56135, Conference Proceedings of the 2016 ASME IGTI Turbo Expo, Seoul, South Korea.
Kirsch, K.L. and Thole, K.A., “Heat Transfer and Pressure Loss Measurements in Additively Manufactured Wavy Microchannels,” J. Turbomach, vol 139(1), pp. 011007, 2016.
Lange, E., Lynch, S. P., Lewis, S., “Computational and Experimental Studies of Midpassage Gap Leakage and Misalignment for a Non-Axisymmetric Contoured Turbine Blade Endwall,” ASME paper GT2016-56128, Conference Proceedings of the 2016 ASME IGTI Turbo Expo, Seoul, South Korea.
Lynch, S. P., 2016, “Measurements and Predictions of the Three-Dimensional Boundary Layer in a Turbine Blade Passage,” AIAA paper 2016-1891, Conference Proceedings of the 2016 AIAA SciTech Conference, San Diego, CA, USA.
Lynch, S., Thole, K. A., 2016, “Comparison of the Three-Dimensional Boundary Layer on Flat Versus Contoured Endwall, J Turbomach, vol. 138, pp 041008.
Mensch, A. and Thole, K. A., “Effects of non-axisymmetric endwall contouring and film cooling on the passage flowfield in a linear turbine cascade,” Experiments in Fluids, vol. 57, pp. 1-16, 2016.
Schroeder, R.P. and Thole, K.A., “Effect of High Freestream Turbulence on Flowfields of Shaped Film Cooling Holes,” ASME. J. Turbomach. vol 138(9): pp. 091001-091001-10, 2016.
Schroeder, R.P. and Thole, K.A., “Effect of In-Hole Roughness on Film Cooling from a Shaped Hole,” J. Turbomach, vol 139(3), pp. 031004, 2016.
Schroeder, R.P. and Thole, K.A., “Thermal Field Measurements for a Shaped Hole at Low and High Freestream Turbulence Intensity,” J. Turbomach, vol 139(2), pp. 021012, 2016.
Siroka, S., Shallcross, M., Lynch, S. P., 2016, “Unsteady Heat Transfer Around Low Aspect Ratio Cylinders in an Array,” ASME paper IMECE2016-66783, Conference proceedings of the 2016 ASME International Mechanical Engineering Congress and Expo, Phoenix, Arizona, USA.
Snyder, J. C., Stimpson, C. K., Thole, K. A., and Mongillo, D., “Build Direction Effects on Additively Manufactured Channels,” J. Turbomach. 2016;138(5):051006-051006-8. doi:10.1115/1.4032168.
Stimpson, C. K., Snyder, J. C., Thole, K. A., and Mongillo, D., “Roughness Effects on Flow and Heat Transfer for Additively Manufactured Channels,” J. Turbomach. 2016;138(5):051008-051008-10. doi:10.1115/1.4032167.
Stimpson, C. K., Snyder, J. C., Thole, K. A., and Mongillo, D., “Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels,” J. Turbomach, vol 139(2), pp. 021003, 2016.
2015:
Anderson, C., Lynch, S., 2015, “Time Resolved Stereo-PIV Measurements of the Horseshoe Vortex System in a Low Aspect Ratio Pin-Fin Array,” AIAA paper 2015-3373, Conference Proceedings of the 2015 AIAA Propulsion and Energy Conference, Orlando, FL USA.
Kirsch, K. L. and Thole, K. A., “Heat Transfer Measurements of Oblong Pins,” J Turbomach, vol. 137, pp. 071004, 2014.
Lynch, S. P., Thole, K.A., 2015, “Comparison of the Three-Dimensional Boundary Layer on Flat versus Contoured Turbine Endwalls,” ASME paper GT2015-43298, Conference Proceedings of the 2015 ASME IGTI Turbo Expo, Montreal, Canada.
Mensch, A. and Thole, K. A., “Conjugate Heat Transfer Analysis of the Effects of Impingement Channel Height for a Turbine Blade Endwall,” Int. J. of Heat and Mass Transfer, vol. 82, pp. 66-77, 2015.
Mensch, A. and Thole, K. A., “Simulations of Multiphase Particle Deposition on a Gas Turbine Endwall With Impingement and Film Cooling,” J. Turbomach, vol. 137, pp. 111002-111002-8, 2015.
Mensch, A. and Thole, K. A., “Overall Effectiveness and Flowfield Measurements for an Endwall with Non-Axisymmetric Contouring,” J. Turbomach, vol. 138, pp. 031007, 2015.
Snyder, J. C., Stimpson, C. K., Thole, K. A., Mongillo, D. J. “Build Direction Effects on Microchannel Tolerance and Surface Roughness,” ASME. J. Mech. Des., vol. 137, pp. 2111411-111411-7, 2015.
Whitfield, C. A., Schroeder, R. P., Thole, K. A., and Lewis, S. D., “Blockage Effects from Simulated Thermal Barrier Coatings for Cylindrical and Shaped Cooling Holes,” J Turbomach, vol. 137, pp. 091004, 2015.
2014:
Barringer, M., Coward, A., Clark, K., Thole, K. A., Schmitz, J., Wagner, J., Alvin, M. A., Burke, P., and Dennis, R., “The Design of a Steady Aero Thermal Research Turbine (START) for Studying Secondary Flow Leakages and Airfoil Heat Transfer,” International Gas Turbine and Aeroengine Congress and Exposition, Düsseldorf, Germany, GT2014-25570, 2014.
Barringer, M., Thole, K. A., Krishnan, V., and Landrum, E., “Manufacturing Influences on Pressure Losses of Channel Fed Holes,” J Turbomach, vol. 136, pp. 051012, 2014.
Eberly, M. K. and Thole, K. A., “Time-Resolved Film-Cooling Flows at High and Low Density Ratios,” J Turbomach, vol. 136, pp. 061003, 2014 (2013 Best Paper Award for Gas Turbine Heat Transfer).
Kirsch, K. L., Ostanek, J. K., and Thole, K. A., “Comparison of Pin Surface Heat Transfer in Arrays of Oblong and Cylindrical Pin Fins,” J Turbomach, vol. 136, pp. 041015, 2014.
Kirsch, K. L., Ostanek, J. K., Thole, K. A., and Kaufman, E., “Row Removal Heat transfer Study for Pin Fin Arrays,” International Gas Turbine and Aeroengine Congress and Exposition, Düsseldorf, Germany, GT2014-25348, 2014.
Mensch, A., Thole, K. A., and Craven, B. A., “Conjugate Heat Transfer Measurements and Predictions of a Blade Endwall with a Thermal Barrier Coating,” J Turbomach, vol. 136, pp. 121003, 2014.
Mensch, A. and Thole, K. A., “Overall Effectiveness of a Blade Endwall with Jet Impingement and Film Cooling,” J Eng Gas Turb Power, vol. 136, pp. 031901, 2014.
Milanovic, I., Whiton, J., Florea, R., Lynch, S., Tillman, G., Stucky, M., 2014, “RANS Simulations for Sensitivity Analysis of Compressor Transition Duct,” AIAA paper 2014-3631, Conference Proceedings of the 2014 AIAA Propulsion and Energy Conference, Cleveland, OH USA.
Schroeder, R. P. and Thole, K. A., “Adiabatic Effectiveness Measurements for a Baseline Shaped Film Cooling Hole,” International Gas Turbine and Aeroengine Congress and Exposition, Düsseldorf, Germany, GT2014-25992, 2014.
2013:
Barringer, M.D., Thole, K. A., Breneman, D. L., Tham, K-M, and Laurello, V., “Effects of Centrifugal Forces on Particle Deposition for a Representative Seal Pin Between Two Blades,” J Eng Gas Turb Power, vol. 135, pp. 032601, 2013.
Lawson, S., Lynch, S., and Thole, K. A., “Simulations of Multi-Phase Particle Deposition on a Nonaxisymmetric Contoured Endwall with Film-Cooling,” J Turbomach, vol. 135, pp. 031032, 2013.
Lawson, S. A., Lynch, S. P., and Thole, K.A., 2013, “Simulations of Multi-Phase Particle Deposition on a Non-Axisymmetric Contoured Endwall with Film Cooling,” ASME J. of Turbomachinery, Vol. 135, pp. 031032-1-11.
Lynch, S. P., Thole, K.A., Kohli, A., Lehane, C., and Praisner, T., 2013, “Endwall Heat Transfer for a Turbine Blade with an Upstream Cavity and Rim Seal Leakage,” ASME paper GT2013-94942, Conference Proceedings of the 2013 ASME IGTI Turbo Expo, San Antonio, TX USA.
Lynch, S. P., Thole, K.A., Kohli, A., Lehane, C., and Praisner, T., 2013, “Aerodynamic Loss for a Turbine Blade with Endwall Leakage Features and Contouring,” 2013, ASME paper GT2013-94943, Conference Proceedings of the 2013 ASME IGTI Turbo Expo, San Antonio, TX USA.
Musgrove, G. O., Thole, K. A., Grover, E., and Barker, J., “Performance Measurements of a Unique Louver Particle Separator for Gas Turbine Engines,” J Eng Gas Turb Power, vol. 135, pp. 012001, 2013.
Thrift, A. A. and Thole, K. A., “Impact of the Combustor-Turbine Interface Slot Orientation on the Durability of a Nozzle Guide Vane Endwall,” J Turbomach, vol. 135, pp. 041019, 2013.
2012:
Lawson, S. A., Lynch, S. P., and Thole, K.A., 2012, “Simulations of Multi-Phase Particle Deposition on a Non-Axisymmetric Contoured Endwall with Film Cooling,” ASME paper GT2012-68174, Conference Proceedings of the 2012 ASME IGTI Turbo Expo, Copenhagen, Denmark.
Lawson, S. A., Thole, K. A., Okita, Y., and Nakamata, C., “Simulations of Multi-Phase Particle Deposition on a Showerhead With Staggered Film-Cooling Holes,” J Turbomach, vol. 134, pp. 051041, 2012.
Lawson, S. A. and Thole, K. A., “Simulations of Multi-Phase Particle Deposition on Endwall Film-Cooling,” J Turbomach, vol. 134, pp. 011003, 2012.
Lawson, S. A. and Thole, K. A., “Simulations of Multiphase Particle Deposition on Endwall Film-Cooling Holes in Transverse Trenches,” J Turbomach, vol. 134, pp. 051040, 2012.
Ostanek, J. K. and Thole, K. A., “Effect of streamwise spacing on periodic and random unsteadiness in a bundle of short cylinders confined in a channel,” Experiments in Fluids, vol. 53, pp. 1779-1796, 2012.
Ostanek, J. K. and Thole, K. A., “Wake development in staggered short cylinder arrays within a channel,” Experiments in Fluids, vol. 53, pp. 673-697, 2012.
Ostanek, J. K. and Thole, K. A., “Flowfield Measurements in a Single Row of Low Aspect Ratio Pin Fins,” J Turbomach, vol. 134, pp. 051034, 2012.
Thrift, A. A., Thole, K. A., and Hada, S.,”Effects of Orientation and Position of the Combustor-Turbine Interface Gap on the Cooling of a Vane Endwall,” J Turbomach, vol. 134, pp 061019, 2012.
Thrift, A. A. and Thole, K. A., “Influence of Flow Injection Angle on a Leading-Edge Horseshoe Vortex,” International Journal of Heat and Mass Transfer, vol. 55, pp. 4651-4664, 2012.
2011:
Cardwell, N. D., Vlachos, P. P., and Thole, K. A., “A Method for Identifying and Visualizing Foreign Particle Motion Using Time Resolved Particle Tracking Velocimetry,” J Turbomach, vol. 133, pp. 021021, 2011.
Cardwell, N., Vlachos, P. and Thole, K. A., “A Multi-Parametric Particle Pairing Algorithm for Particle Tracking in Single and Multiphase Flows,” Science, Measurement & Technology, MST/380473/PAP, 2011.
Cardwell, N. D., Vlachos, P. P., and Thole, K. A., “Developing and Fully Developed Turbulent Flow in Ribbed Channels,” Experiments in Fluids, DOI: 10.1007/s00348-010-0993-y, 2011.
Carullo, J. S., Thole, K. A., Zhang, L. J., Moon, H. K., Nasir, S., Cress, R. D., and Ng, W. F., “The Effects of Freestream Turbulence, Turbulence Length Scale, and Exit Reynolds Number on Turbine Blade Heat Transfer in a Transonic Cascade,” J Turbomach, vol. 133, pp. 011030, 2011.
Colban, W., Thole, K. A., and Bogard, D., “A Film Cooling Correlation for Shaped Holes on a Flat-Plate Surface,” J Turbomach, vol. 133, pp. 011002, 2011.
Hada, S. and Thole, K. A., “Computational Study of a Midpassage Gap and Upstream Slot on Vane Endwall Film-Cooling,” J Turbomach, vol. 133, pp. 011024, 2011.
Lawson, S., Thrift, A. A., Thole, K. A., and Kohli, A., “Heat Transfer from Multiple Row Arrays of Low Aspect Ratio Pin Fins,” International Journal of Heat and Mass Transfer, doi:10.1016/j.physletb.2003.10.071, 2011.
Lawson, S. A. and Thole, K. A., “Effects of Simulated Particle Deposition on Film Cooling,” J Turbomach, vol. 133, pp. 021009, 2011 (2010 Best Paper Award for Gas Turbine Heat Transfer).
Lyall, M. E., Thrift, A. A., Thole, K. A., and Kohli, A., “Heat Transfer from Low Aspect Ratio Pin Fins,” J Turbomach, vol. 133, pp. 011001, 2011.
Lynch, S. P., Thole, K. A., Kohli, A., and Lehane, C., “Computational Predictions of Heat Transfer and Film-Cooling for a Turbine Blade with Non-Axiymmetric Endwall Contouring,” J Turbomach, vol. 133, pp. 041003, 2011.
Lynch, S. P., Sundaram, N., Thole, K. A., Kohli, A., and Lehane, C., “Heat Transfer for a Turbine Blade with Non-Axisymmetric Endwall Contouring,” J Turbomach, vol. 133, 011019, 2011.
Lynch, S. P. and Thole, K. A., 2011, “The Effect of the Combustor-Turbine Slot and Mid-Passage Gap on Vane Endwall Heat Transfer,” ASME J. of Turbomachinery, Vol. 133, pp. 041002-1-9.
Lynch, S. and Thole, K. A., “The Effect of the Combustor-Turbine Slot and Mid-Passage Gap on Vane Endwall Heat Transfer,” J Turbomach, vol. 133, pp. 041002, 2011.
Thrift, A. A., Thole, K. A., and Hada, S., “Effects of an Axisymmetric Contoured Endwall on a Nozzle Guide Vane: Adiabatic Effectiveness Measurements,” J Turbomach, vol. 133, pp. 041007, 2011.
Thrift, A. A., Thole, K. A., and Hada, S., “Effects of an Axisymmetric Contoured Endwall on a Nozzle Guide Vane: Heat Transfer Measurements,” J Turbomach, vol. 133, pp. 041008, 2011.
Weaver, S., Barringer, M., and Thole, K. A., “Micro Channels with Manufacturing Roughness Levels,” J Turbomach, vol. 133, pp. 041014, 2011.
2010:
Cardwell, N. D., Burd, S. W., and Thole, K. A., “Investigation of Sand Blocking within Impingement and Film-Cooling Holes,” J Turbomach, vol. 132, pp. 021020, 2010.
Land, C., Thole, K. A., and Joe, C., “Considerations of a Double-Wall Cooling Design to Reduce Sand Blockage,” J Turbomach, vol. 132, pp. 031011, 2010.
Lynch, S. P., Thole, K. A., Kohli, A., and Lehane, C., 2010, “Computational Predictions of Heat Transfer and Film Cooling for a Turbine Blade with Non-Axisymmetric Endwall Contouring,” ASME paper GT2010-22984, Conference Proceedings of the 2010 ASME IGTI Turbo Expo, Glasgow, Scotland.
Marshall, M., Alley, M., Zappe, S., Thole, K., Frecker, M., and Engel, R., “Ambassador Program for Recruiting Girls into Engineering-Appropriate Messages, Messengers, and Modes of Delivery,” 40th ASEE/IEEE Frontiers in Engineering Conference, T1A, October 27-30, 2010, Washington, DC, 2010.
Ostanek, J., Thole, K. A., Prausa, J., and Van Suetendael, A., “Establishing a Methodology for Resolving Convective Heat Transfer from Complex Geometries,” J Turbomach, vol. 132, pp. 031014, 2010.
Thrift, A. A., Brumbaugh, S., Thole, K. A., and Kohli, A., “A Methodology to Measure Aerodynamic Forces on Cylinders in Channel Flow,” Journal of Fluids Engineering, vol. 132, pp. 081401, 2010.
2009:
Barringer, M. D., Thole, K. A., Polanka, M. D., Clark, J. P., and Koch, P. J., “Migration of Combustor Exit Profiles Through High Pressure Turbine Vanes,” J Turbomach, vol. 131, pp. 021010, 2009.
Barringer, M. D., Thole, K. A., and Polanka, M. D., “An Experimental Study of Combustor Exit Profile Shapes on Endwall Heat Transfer in High Pressure Turbine Vanes,” J Turbomach, vol. 131, pp. 021009, 2009.
Barringer, M., Thole, K. A., and Polanka, M. D., “Effects of Combustor Exit Profiles on High Pressure Turbine Vane Aerodynamics and Heat Transfer,” J Turbomach, vol. 131, pp. 021008, 2009.
Knost, D. G., Thole, K. A., and Duggleby, A., “Evaluating a Three-Dimensional Slot Design for the Combustor-Turbine Interface,” International Gas Turbine and Aeroengine Congress and Exposition, Orlando, GT2009-60168, 2009.
Lynch, S. P., Narayan, S., Thole, K. A., Kohli, A., and Lehane, C., 2009, “Heat Transfer for a Turbine Blade with Non-Axisymmetric Endwall Contouring,” ASME paper GT2009-60185, Conference Proceedings of the 2009 ASME IGTI Turbo Expo, Orlando, Florida, USA.
Lynch, S. P. and Thole, K. A., 2009, “The Effect of the Combustor-Turbine Slot and Mid-Passage Gap on Vane Endwall Heat Transfer,” ASME paper IMECE2009-12847, Conference Proceedings of the 2009 ASME International Mechanical Engineering Congress and Expo, Orlando, Florida, USA.
Musgrove, G. O., Barringer, M. D., Thole, K. A., Grover, E., and Barker, J., “Computational Design of a Louver Particle Separator for Gas Turbine Engines,” International Gas Turbine and Aeroengine Congress and Exposition, Orlando, GT2009-60199, 2009.
Nasir, S., Zhang, L. J., Moon, H. K., Carullo, J. S., Ng, W. F., Thole, K. A., and Wu, H., “Effects of Large Scale High Freestream Turbulence and Exit Reynolds Number on Turbine Vane Heat Transfer in a Transonic Cascade,” J Turbomach, vol. 131, pp. 021021, 2009.
Sundaram, N. and Thole, K. A., “Film-Cooling Flowfields with Trenched Holes on an Endwall,” J Turbomach, vol. 131, pp. 041007, 2009.
2008:
Cardwell, N., Vlachos, P., and Thole, K. A., “Developing and Fully Developed Turbulent Flow in Ribbed Channels,” Fluids Engineering Conference, FEDSM2008-55190, 2008 (nominated for Best Paper).
Colban, W., Thole, K. A., and Haendler, M., “A Comparison of Cylindrical and Fan-Shaped Film-Cooling Holes on a Vane Endwall at Low and High Freestream Turbulence Levels,” J Turbomach, vol. 130, pp. 031007-1–031007-9, 2008.
Lawson, M. and Thole, K. A., “Heat Transfer Augmentation along the Tube Wall of a Louvered Fin Heat Exchanger Using Practical Delta Winglets,” International Journal of Heat and Mass Transfer, vol. 51, pp. 2346-2360, 2008.
Lynch, S. P. and Thole, K. A., “The Effect of Combustor-Turbine Interface Gap Leakage on the Endwall Heat Transfer for a Nozzle Guide Vane,” J Turbomach, vol. 130, pp. 041019, 2008.
Sundaram, N., Barringer, M. D., and Thole, K. A., “Effects of Deposits on Film Cooling of a Vane Endwall Along the Pressure Side,” J Turbomach, vol. 130, pp. 0410006, 2008.
Sundaram, N. and Thole, K. A., “Bump and Trench Modifications to Film-Cooling Holes at the Vane Endwall Junction,” J Turbomach, vol. 130, pp. 041013, 2008.
2007:
Barringer, M. D., Thole, K. A., and Polanka, M. D., “Experimental Evaluation of an Inlet Profile Generator for High-Pressure Turbine Tests,” J Turbomach, vol. 129, pp. 23-31, 2007.
Cardwell, N., Sundaram, N., and Thole, K. A., “The Effects of Varying the Combustor-Turbine Gap,” J Turbomach, vol. 129, pp. 756-764, 2007.
Colban, W. and Thole, K. A., “Influence of Hole Shape on the Performance of a Turbine Vane Endwall Film-Cooling Scheme,” International Journal of Heat and Fluid Flow, vol. 28, Issue 3, pp. 341-356, 2007.
Colban, W., Thole, K. A., and Haendler, M., “Experimental and Computational Comparisons of Fan-Shaped Film-Cooling on a Turbine Vane Surface,” J Turbomach, vol. 129, pp. 23-31, 2007.
Lynch, S. P. and Thole, K. A., 2007, “The Effect of Combustor-Turbine Interface Gap Leakage on the Endwall Heat Transfer for a Nozzle Guide Vane,” ASME paper GT2007-27867, Conference Proceedings of the 2007 ASME IGTI Turbo Expo, Montreal, Canada.
Scrittore, J., Thole, K. A., and Burd, S., Investigation of Velocity Profiles for Effusion Cooling of Combustor Liners,” J Turbomach, vol. 129, pp. 518-526, 2007.
Sundaram, N. and Thole, K. A., “Effects of Surface Deposition, Hole Blockage, and TBC Spallation on Vane Endwall Film-Cooling,” J Turbomach, vol. 129, pp. 599-607, 2007.
2006:
Bogard, D. G. and Thole, K. A., “Gas Turbine Film Cooling,” AIAA Journal of Propulsion and Power, vol. 22, pp. 249-271, 2006.
Cardwell, N., Sundaram, N., and Thole, K. A., “Effect of Midpassage Gap, Endwall Misalignment, and Roughness on Endwall Film-Cooling,” J Turbomach, vol. 128, pp. 62-70, 2006.
Colban, W., Gratton, A., Thole, K. A., and Haendler, M., “Heat Transfer and Film-Cooling Measurements on a Stator Vane with Fan-Shaped Cooling Holes,” J Turbomach, vol. 128, pp. 53-61, 2006.
Sanders, P. and Thole, K. A., “Effects of Winglets to Augment Tube Wall Heat Transfer in Louvered Fin Heat Exchangers,” International Journal of Heat and Mass Transfer, vol. 49, Issue 21-22, pp. 4058-4069, 2006.
Sewall, E. A., Tafti, D. K., Graham, A., and Thole, K. A., “Experimental Validation of Large Eddy Simulations of Flow and Heat Transfer in a Stationary Ribbed Duct,” International Journal of Heat and Fluid Flow, vol. 27, Issue 2, pp. 243-258, 2006.
Walsh, W. S., Thole, K. A., and Joe, C., “Effects of Sand Ingestion on the Blockage of Film-Cooling Holes,” International Gas Turbine and Aeroengine Congress and Exposition, Barcelona, Spain, ASME Paper GT2006-90067, 2006.
2005:
Couch, E., Christophel, J. S., Hohlfeld, E., Thole, K. A., and Cunha, F., “Comparison of Measurements and Predictions for Blowing from the Tip of a Turbine Blade,” AIAA Journal of Propulsion and Power, vol. 21, no. 2, pp. 335-343, 2005.
Christophel, J. R., Couch, E., Thole, K. A., and Cunha, F., “Measured Adiabatic Effectiveness and Heat Transfer for Blowing from the Tip of a Turbine Blade,” J Turbomach, vol. 127, pp. 251-262, 2005.
Christophel, J. R., Thole, K. A., and Cunha, F., “Cooling the Tip of a Turbine Blade Using Pressure Side Holes-Part 1: Film Effectiveness Measurements,” J Turbomach, vol. 127, pp. 270-277, 2005.
Christophel, J. R., Thole, K. A., and Cunha, F., “Cooling the Tip of a Turbine Blade Using Pressure Side Holes-Part 2: Heat Transfer Measurements,” J Turbomach, vol. 127, pp. 278-286, 2005.
Hohlfeld, E., Couch, E., Christophel, J., and Thole, K. A., “Predictions of Cooling from Dirt Purge Holes Along the Tip of a Turbine Blade,” International Journal of Turbo and Jet Engines, vol. 22, pp. 139-152, 2005.
Knost, D. G. and Thole, K. A., “Adiabatic Effectiveness Measurements of Endwall Film-Cooling for a First Stage Vane,” J Turbomach, vol. 127, pp.297-305, 2005.
Knost, D. and Thole, K. A., “Computational Predictions of Endwall Film-Cooling for a First Stage Vane,” International Journal of Turbo and Jet Engines, vol. 22, pp. 41-58, 2005.
Kunze, V. R., Wolff, M., Barringer, M. D., Thole, K. A., and Polanka, M. D., “Numerical Modeling of Flow and Thermal Properties Within a Combustor Simulator,” International Gas Turbine and Aeroengine Congress and Exposition, Reno, Nevada, ASME Paper GT-2005-68284, 2005.
Pang, Y., Scott, E. P., Chen, J. Z., and Thole, K. A., “Electrical and Thermal Layout Design and Optimization Considerations for DPS Active IPEM,” Journal of Electronic Packaging, vol. 127, pp. 59-66, 2005.
Ranson, W., Thole, K. A., and Cunha, F., “Adiabatic Effectiveness Measurements and Predictions of Leakage Flows along a Blade Endwall,” J Turbomach, vol. 127, pp. 609-618, 2005.
Scrittore, J. J. and Thole, K. A., “Experimental Characterization of Film-Colling Effectiveness near Combustion Dilution Holes,” Proceedings ASME Turbo Expo, Reno, Nevada, ASME Paper GT-2005-68704, 2005.
Stephan, R. and Thole, K. A., “Optimization Study Relevant to Louvered Fin Compact Heat Exchangers,” International Journal of Compact Heat Exchangers, vol. VI, no. 1, pp. 73-92, 2005.
Thole, K. A. and Knost, D., “Heat Transfer and Film-Cooling for the Endwall of a First Stage Turbine Vane,” International Journal of Heat and Mass Transfer, vol. 48, issues 25-26, pp. 5255-5269, 2005.
Vakil, S. and Thole, K. A., “Flow and Thermal Field Measurements in a Combustor Simulator Relevant to a Gas Turbine Aero-Engine,” J Eng Gas Turb Power, vol. 127, pp. 257-267, 2005.
2004:
Barringer, M. D., Thole, K. A. and Polanka, M. D., “Developing a Combustor Simulator for Investigating High Pressure Turbine Aerodynamics and Heat Transfer, International Gas Turbine and Aeroengine Congress and Exposition, Vienna, Austria, ASME Paper GT-2004-53613, 2004.
Ebeling, C. and Thole, K. A., “Measurements and Predictions of the Heat Transfer at the Tube-Fin Junction for Louvered Fin Exchangers,” International Journal of Compact Heat Exchangers, vol. V, pp. 265-286, 2004.
Graham, A., Sewall, E., and Thole, K. A., “Flowfield Measurements in a Ribbed Channel Relevant to Internal Turbine Blade Cooling, International Gas Turbine and Aeroengine Congress and Exposition, Vienna, Austria, ASME Paper GT-2004-53361, 2004.
Knost, D. and Thole, K. A., “Adiabatic Effectiveness Measurements of Endwall Film-Cooling for a First Stage Vane, International Gas Turbine and Aeroengine Congress and Exposition, Vienna, Austria, ASME Paper GT-2004-53326, 2004.
Lethander, A., and Thole, K. A., “Optimizing the Vane-Endwall Junction to Reduce Adiabatic Wall Temperatures in a Turbine Vane Passage,” AIAA Journal of Propulsion and Power, vol. 20, pp. 1105-1116, 2004.
Stitzel, S. and Thole, K. A., “Flow Field Computations of Combustor-Turbine Interactions Relevant to a Gas Turbine Engine,” J Turbomach, vol. 126, pp. 122-129, 2004.
2003:
Hohlfeld, E., Couch, E., Christophel, J., and Thole, K. A., “Predictions of Cooling from Dirt Purge Holes Along the Tip of a Turbine Blade,” International Gas Turbine and Aeroengine Congress and Exposition, Atlanta, Georgia, ASME Paper GT-2003-38251, 2003.
Lethander, A., Thole, K. A., Zess, G., and Wagner, J., “Optimizing the Vane-Endwall Junction to Reduce Adiabatic Wall Temperatures in a Turbine Vane Passage,” International Gas Turbine and Aeroengine Congress and Exposition, Atlanta, Georgia, ASME Paper GT-2003-38940, 2003.
Vakil, S. and Thole, K. A., “Flow and Thermal Field Measurements in a Combustor Simulator Relevant to a Gas Turbine Aero-Engine,” International Gas Turbine and Aeroengine Congress and Exposition, Atlanta, Georgia, ASME Paper GT-2003-38254, 2003.
2002:
Barringer, M. D., Richard, O. T., Walter, J. P., Stitzel, S. M., and Thole, K. A., “Flow Field Simulations of a Gas Turbine Combustor,” J Turbomach, vol. 124, pp. 508-516, 2002.
Colban, W. F., Thole, K. A., and Zess, G., “Combustor-Turbine Interface Studies: Part 1: Endwall Measurements,” J Turbomach, vol. 125, pp. 193-202, 2002.
Colban, W. F., Lethander, A. T., Thole, K. A., and Zess, G., “Combustor-Turbine Interface Studies: Part 2: Flow and Thermal Field Measurements,” J Turbomach, vol. 125, pp. 203-209, 2002.
Hermanson, K. and Thole, K. A., “Effect on Non-Uniform Inlet Conditions on Endwall Secondary Flows,” J Turbomach, vol. 124, pp. 623-631, 2002.
Lyman, A. C., Stephan, R. A., Thole, K. A., Zhang, L., and Memory, S., “Scaling of Heat Transfer Coefficients Along Louvered Fins,” Experimental Thermal Fluid Science, vol. 26, no. 5, pp. 547-563, 2002.
Nix, A., Smith, A., Diller, T., Ng, W., and Thole, K. A., “High Intensity, Large Length-Scale Freestream Turbulence Generation in a Transonic Turbine Cascade,” International Gas Turbine and Aeroengine Congress and Exposition, Amsterdam, The Netherlands, ASME Paper 2002-GT-30523, 2002.
Pang, Y. F., Chen, J. Z., Scott, E. P., and Thole, K. A., “Electrical and Thermal Layout Design and Optimization Considerations for DPS Active IPEM,” New Orleans, Louisiana, IMECE2002-33778, 2002.
Radomsky, R. and Thole, K. A., “Detailed Boundary Layer Measurements on a Turbine Stator Vane at Elevated Freestream Turbulence Levels,” J Turbomach, vol. 124, pp. 107-118, 2002.
Thole, K. A., Radomsky, R., Kang, B., and Kohli, A., “Elevated Freestream Turbulence Effects on Heat Transfer for a Gas Turbine Vane,” International Journal of Heat and Fluid Flow, vol. 23, pp. 137-147, 2002.
Zess, G. A. and Thole, K. A., “Computational Design and Experimental Evaluation of Using a Leading Edge Fillet on a Gas Turbine Vane,” J Turbomach, vol. 124, no. 2, pp. 167-175, 2002.
2001:
Harrington, M., McWaters, M., Bogard, D., Lemmon, C., and Thole, K. A., “Full-Coverage Film Cooling with Short Normal Injection Holes,” J Turbomach, vol. 123, pp. 798-805, 2001.
Thole, K. A., Radomsky, R., Kang, B., and Kohli, A., “Elevated Freestream Turbulence Effects on Heat Transfer for a Gas Turbine Vane,” Turbulent Heat Transfer Conference, Anchorage, Alaska, March, 2001.
2000:
Hermanson, K. and Thole, K. A., “Effect of Inlet Profiles on Endwall Secondary Flows,” Journal of Propulsion and Power, vol. 16, no. 2, pp. 286-296, 2000.
Hermanson, K. and Thole, K. A., “Effect of Mach Number on Secondary Flow Characteristics,” International Journal of Turbo Jet Engines, vol. 17, pp. 179-196, 2000.
Kang, M. and Thole, K. A., “Flowfield Measurements in the Endwall Region of a Stator Vane,” J Turbomach, vol. 122, pp. 458-466, 2000.
Radomsky, R. and Thole, K. A., “Flowfield Measurements for a Highly Turbulent Flow in a Stator Van Passage,” J Turbomach, vol. 122, no. 2, pp. 255-262, 2000.
Radomsky, R. and Thole, K. A., “High Freestream Turbulence Effects in the Endwall Leading Edge Region,” J Turbomach, vol. 122, pp. 699-708, 2000.
Radomsky, R. and Thole, K. A., “Measurements and Predictions of a Highly Turbulent Flowfield in a Turbine Vane Passage,” Journal of Fluids Engineering, vol. 122, pp. 666-676, 2000.
1999:
Hermanson, K. and Thole, K. A., “Effect of Inlet Conditions on Endwall Secondary Flows,” AIAA Aerospace Meeting, Reno, Nevada, AIAA Paper 99-0241, 1999.
Kang, M., Kohli, A., and Thole, K. A., “Heat Transfer and Flowfield Measurements in the Leading Edge Region of a Stator Vane Endwall,” J Turbomach, vol. 121, pp. 558-568, 1999.
Lemmon, C., Kohli, A., and Thole, K. A., “Formation of Counter-Rotating Vortices in Film-Cooling Flows,” International Gas Turbine and Aeroengine Congress and Exposition, Indianapolis, Indiana, ASME Paper 99-GT-161, 1999.
Springer, M. E. and Thole, K. A., “Entry Region of Louvered Fin Heat Exchangers,” Experimental Thermal and Fluid Science, vol. 19, pp. 223-232, 1999.
Zhang, L. W., Memory, S. B., Wattelet, J. P., Springer, M. E., and Thole, K. A., “A Combined Experimental and Computational Study of Flowfields in a Louvered Fin Heat Exchanger,” VTMS 4, ICE, London, United Kingdom, 1999.
1998:
Kang, M., Kohli, A., and Thole, K. A., “Heat Transfer and Flowfield Measurements in the Leading Edge Region of a Stator Vane Endwall,” International Gas Turbine and Aeroengine Congress and Exposition, Stockholm, Sweden, ASME Paper 98-GT-173, 1998.
Kohli, A. and Thole, K. A., Entrance Effects on a Diffused Film-Cooling Hole,” International Gas Turbine and Aeroengine Congress and Exposition, Stockholm, Sweden, ASME Paper 98-GT-402, 1998.
Radomsky, R. W. and Thole, K. A., “Effects Of High Freestream Turbulence Levels and Length Scales on Stator Vane Heat Transfer,” International Gas Turbine and Aeroengine Congress and Exposition, Stockholm, Sweden, ASME Paper 98-GT-236, 1998.
Springer, M. and Thole, K. A., “Experimental Design for Flowfield Studies of Louvered Fins,” Experimental Thermal and Fluid Science, vol. 18, no. 3, pp. 258-269, 1998.
Springer, M. and Thole, K. A., Zhang, L. W., Memory, S. B., and Wattelet, J. P., Modine Manufacturing, “A Combined CFD and LDV Study of Flowfields in Louvered Fin Heat Exchangers,” ASME Fluids Engineering Division Meeting, Paper Number FEDSM98-4843, 1998.
Thole, K. A., Gritsch, M., Schulz, A., and Wittig, S., “Flowfield Measurements for Cooling Holes with Expanded Exits,” J Turbomach, vol. 120, no. 2, pp. 327-336, 1998.
1997:
Bangert, B., Kohli, A., Sauer, J., and Thole, K. A., “High Freestream Turbulence Simulation in a Scaled-Up Turbine Vane Passage,” International Gas Turbine and Aeroengine Congress and Exposition, Orlando, Florida, ASME Paper 97-GT-51, 1997.
Kohli, A. and Thole, K. A., “A CFD Investigation on the Effect of Entrance Flow Conditions in Discrete Film Cooling Holes,” 32nd National Heat Transfer Conference, vol. 12, pp. 223-232 (W. M. Rohsenow Prize for Best Presentation for the Gas Turbine Heat Transfer Committee), 1997.
Martin, C. and Thole, K. A., “A CFD Benchmark Study: Leading Edge Film Cooling with Compound Angle Injection,” International Gas Turbine and Aeroengine Congress and Exposition, Orlando, Florida, ASME Paper 97-GT-297, 1997.
Thole, K. A., Gritsch, M., Schulz, A., and Wittig, S., “Effects of a Crossflow at the Entrance to a Film-Cooling Hole,” Journal of Fluids Engineering, vol. 119, no. 3, pp. 533-540, 1997.
1996:
Thole, K. A. and Bogard, D. G., “High Freestream Turbulence Effects on Turbulent Boundary Layers,” Journal of Fluids Engineering, vol. 118, no. 2, pp. 276-284, 1996.
Wittig, S., Schulz, A., Gritsch, M., and Thole, K. A., “Transonic Film Cooling Investigations: Effects of Hole Shapes and Orientations,” International Gas Turbine and Aeroengine Congress and Exposition, Birmingham, England, ASME Paper 96-GT-222, 1996.
1995:
Laudon, M. F., Engelstad, R. L., Thole, K. A., Dauksher, W. J., Resnick, D. J., Cummings, K. D., Seese, P,. and Johnson, W., “Modeling of In-Plane Distortions Due to Variations in Absorber Stress,” International Micro- and Nano- Engineering, Aix-en-Provence, France, 1995.
Laudon, M. F., Thole, K. A., Engelstad, R. L., Resnick, D. J., Cummings, K. D., and Dauksher, W. J., “Thermal Analysis of X-ray Membrane in a Plasma Environment,” 39th International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication, Phoenix, Arizona, 1995.
Laudon, M. F., Thole, K. A., Englestad, R. L., Resnick, D. J., Cummings, K. D., and Dauksher, W. J., “Thermal Analysis of X-ray Membrane in a Plasma Environment,” Journal of Vacuum Science Technology B, vol. 13, no. 6, pp. 3050-3054, 1995.
Thole, K. A. and Bogard, D. G., “Enhanced Heat Transfer and Skin Friction Due to High Freestream Turbulence,” J Turbomach, vol. 117, no. 3, pp. 418-424, 1995.
1994:
Thole, K. A. and Bogard, D. G., “A Technique for Simultaneous Temperature and Velocity Measurements,” Measurement Science and Technology, vol. 5, pp. 435-439, 1994.
Thole, K. A., Bogard, D. G., and Whan-Tong, J., “Generating High Freestream Turbulence Levels,” Experiments in Fluids, vol. 17, pp. 375-380, 1994.
1991:
Thole, K. A., Whan-Tong, J., and Bogard, D. G., 1991, “Generation of Very High Freestream Turbulence Levels and the Effects on Heat Transfer,” Turbulent Shear Flow Conference, 27.5.1-27.5.7, Munich, Germany.
1990:
Thole, K. A., Sinha, A., Bogard, D. G., and Crawford, M. E., 1990, “Mean Temperature Measurements of Jets with a Crossflow for Gas Turbine Film Cooling Application,” Rotating Machinery Transport Phenomena, J. H. Kim and W. J. Yang, ed. Hemisphere Publishing Corporation, New York, New York.
START Publications:
Corbett, T.M., Thole, K. A., Sudhakar, B., 2023, “Amplitude and Wavelength Effects for Wavy Channels,” J. of Turbomachinery, vol. 145(3), pp. 031011
Corbett, T. M., Thole, K. A., Sudhakar, B., 2023, “Impacts of Pin Fin Shape and Spacing on Heat Transfer and Pressure Losses,” J. of Turbomachinery, vol. 145(5), pp. 051014.
Veley, E. M., Thole, K. A., Furgeson, M. T., and Bogard, D. G., 2023, “Printability and Overall Cooling Performance of Additively Manufactured Holes With Inlet and Exit Rounding,” J. of Turbomachinery, vol. 145(3), pp. 031017.
Monge-Concepcion, I., Berdanier, R. A., Barringer, M. D., Thole, K. A., “Use of Multiple Tracer Gases to Quantify Vane Trailing Edge Flow into Turbine Rim Seals,” GT2022-83247.
Knisely, B. F., Berdanier, R. A., Wagner, J. H., Thole, K. A., Arisi, A. N., and Haldeman, C. W., “Effects of Part-to-Part Flow Variations on Overall Effectiveness and Life of Rotating Turbine Blades,” GT2022-83216.
Veley, E. M., Thole, K. A., Furgeson, M. T., and Bogard, D. G., “Printability and Overall Cooling Performance of Additive Manufactured Holes with Inlet and Exit Rounding,” GT2022-83313.
Gutierrez, D., Yoon, C., Furgeson, M. T., Veley, E. M., Bogard, D. G., and Thole, K. A., “Evaluation of Adjoint Optimized Hole – Part I Baseline Performance,” GT2022-83436.
Furgeson, M. T., Veley, E. M., Yoon, C., Gutierrez, D., Bogard, D. G., and Thole, K. A., “Development and Evaluation of Shaped Film Cooling Holes Designed for Additive Manufacturing,” GT2022-83201.
Wilkins, P. H., Lynch, S. P., Thole, K. A., Vincent, T., Quach, S., and Kaufman, E., “Experimental Investigation into the Effect of a Ceramic Matrix Composite Surface on Film Cooling,” GT2022-83109.
Corbett, T. M., Thole, K. A., Sudhakar, B., “Amplitude and Wavelength Effects for Wavy Channels”, GT2022-78356.
DeShong, E. T., Berdanier, R. A., and Thole, K. A., “Predictive Modelling of Local Film-Cooling Flow on a Turbine Rotor Blade,” GT2022-82507.
Edelson, R. and Thole, K. A., “Impact of Ceramic Matrix Composite Topology on Overall Effectiveness,” GT2022-82326.
Rozman, M., DeShong, E. T., Thole, K. A., Berdanier, R. A., Robak, C., 2023, “Characterizing Flow Instabilities During Transient Events in the Turbine Rim Seal Cavity”, J of Turbomachinery, vol. 145(3), pp. 031014.
Wildgoose, A. J., Thole, K. A., Subramanian, R., Kersting, L., and Kulkarni, A., “Impacts of the additive manufacturing process on the roughness of engine scale vanes and cooling channels”, GT2022-84603.
Wildgoose, A. J. and Thole, K. A., “Heat transfer and pressure loss of additively manufactured internal cooling channels with various shapes”, GT2022-82298.
Winegardner, A., Lemay, A., Lynch, S., Thole, K., and O’Connor, J., “Energy and the University: The Role of Gas Turbines in US Universities and Strategies for Enhancing Energy Literacy,” GT2022-83102.
Thole, K. A., Lynch, S. P., Wildgoose, A., 2021, “Review of Advances in Convective Heat Transfer Developed through Additive Manufacturing” Adv in Heat Transfer, vol. 53, pp. 249-325.
Monge-Concepcion, I., Siroka, S., Berdanier, R., Barringer, M., Thole, K., Robak, C., 2022, “Influence of Vane Trailing Edge Flow on the Formation of Cavity Cells and Rim Sealing”, J of Turbomachinery.
DeShong, E, Peters, B., Berdanier, R., Thole, K., Paynabar, K. and Gebraeel, N., 2022, “Correlating Time-Resolved Pressure Measurements with Rim Sealing Effectiveness for Real-Time Turbine Health Monitoring”, J of Turbomachinery, vol. 144(6), pp. 061004.
Cory, T., Edelson, R., and Thole, K. A., Tyler, V., Quach, S. and Mongillo, D., 2022, “Impact of Ceramic Matrix Composite Topology on Friction Factor and Heat Transfer,” J of Turbomachinery, vol. 144(3), pp. 031003.
DeShong, E., Siroka, S., Berdanier, R., Thole, K. A., 2022, “Evaluating the Influence of Rotor-Casing Eccentricity on Turbine Efficiency Including Time-Resolved Flow Field Measurements,” J of Turbomachinery, vol. 144(2), pp. 021012.
Stafford, G., McClain, S., Hanson, D.R., Kunz, R. F., Thole, K. A., 2022, “Convection in Scaled Turbine Internal Cooling Passages with Additive Manufacturing Roughness,” J of Turbomachinery, vol. 144(4), pp. 041008.
Siroka, S., Foley, B., Berdanier, R. A., Thole, K. A., 2021, “Application of 3-omega method for thin-film heat flux gauge calibration,” Measurement Science and Technology, vol. 32, No. 11, pp. 114001.
Monge-Concepción, I., Siroka, S., Berdanier, R. A., Barringer, M., Thole, K. A., Robak, C., “Unsteady Turbine Rim Sealing and Vane Trailing Edge Flow Effects,” GT2021-59273.
Siroka, S., Monge-Concepción, I., Berdanier, R. A., Barringer, M., Thole, K. A., Robak, C., “Correlating Cavity Sealing Effectiveness to Time-Resolved Rim Seal Events in the Presence of Vane Trailing Edge Flow,” GT2021-59285.
Creer, R. M., Thole, K. A., “Influence of Opposing Dilution Jets on Effusion Cooling,” GT2021-59429.
Wilkins, P. H., Lynch, S. P., Thole, K. A., Quach, S., Vincent, T., Mongillo, D., “Effect of a Ceramic Matrix Composite Surface on Film Cooling,” GT2021-59602.
McClain, S. T., Hanson, D. R., Cinnamon, E., Snyder, J. C., Kunz, R. F., Thole, K. A., 2021, “Flow in a Simulated Turbine Blade Cooling Channel with Spatially Varying Roughness Caused by Additive Manufacturing Orientation,” Journal of Turbomachinery, vol. 143(7), pp. 071013.
Wilkins, P. H., Lynch, S. P., Thole, K. A., Quach, S., & Vincent, T. (2021). Experimental Heat Transfer and Boundary Layer Measurements on a Ceramic Matrix Composite Surface. Journal of Turbomachinery, 1–53. https://doi.org/10.1115/1.4050314
Wildgoose, A. J., Thole, K. A., Sanders, P. Wang, L., 2021, “Impact of Additive Manufacturing on Internal Cooling Channels with Varying Diameters and Build Directions,” Journal of Turbomachinery, vol. 143 (7), pp. 071003, https://doi.org/10.1115/1.4050336.
Huelsmann, N. C., Thole, K. A., 2021, “Effects of Jet Impingement on Convective Heat Transfer in Effusion Holes,” Journal of Turbomachinery, vol. 143 (6), pp. 061011, https://doi.org/10.1115/1.4050335.
Knisely, B. F., Berdanier, R. A., Thole, K. A., Haldeman, C. W., Markham, J. R., Cosgrove, J. E., Carlson, A. E., Scire, J. J., 2021, “Acquisition and Processing Considerations for Infrared Images of Rotating Turbine Blades,” Journal of Turbomachinery, vol. 143 (4), pp. 041013.
Berdanier, R. A., DeShong, E. T., Thole, K. A., Robak, 2021 “Evaluating the Effects of Transient Purge Flow on Stator-Rotor Seal Performance,” Journal of Turbomachinery, vol. 143(2), pp. 021006.
Huelsmann, N. C., Thole, K. A., “Effects of Jet Impingement on Convective Heat Transfer in Effusion Holes,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-15577, 2020.
Knisely, B. F., Berdanier, R. A., Thole, K. A., Haldeman, C. W., Markham, J. R., Cosgrove, J. E., Carlson, A. E., Scire, J. J., “Acquisition and Processing Considerations for Infrared Images of Rotating Turbine Blades,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-15522, 2020.
Wilkins, P. H., Lynch, S. P., Thole, K. A., Quach, S., Vincent, T., “Experimental Heat Transfer and Boundary Layer Measurements on a Ceramic Matrix Composite Surface,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-15053, 2020.
Zuccarello, J., Saltzman, D., Lynch, S. P., Haydt, S., Whitfield, C., “A Steady Transonic Linear Cascade for True Scale Cooling Measurements,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-14269, 2020.
Tracy, K., Lynch, S. P., “Large Eddy Simulation of the 7-7-7 Shaped Film Colling Hole at Axial and Compound Angle Orientations,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-14439, 2020.
Wildgoose, A. J., Thole, K. A., Sanders, P., Wang, L., “Impact of Additive Manufacturing on Internal Cooling Channels with Varying Diameters and Build Directions,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-15049, 2020.
McClain, S. T., Hanson, D. R., Cinnamon, E., Snyder, J. C., Kunz, R. F., Thole, K. A., “Flow in a Simulated Turbine Blade Cooling Channel with Spatially Varying Roughness Caused by Additive Manufacturing Orientation,” Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, London, UK, GT2020-16069, 2020.
Snyder, J. C. and Thole, K. A., 2020, “Tailoring Surface Roughness Using Additive Manufacturing to Improve Internal Cooling, Journal of Turbomachinery, vol. 142(7), pp. 071004.
Monge-Concepción, I, Berdanier, R. A., Barringer, M. B., Thole, K. A. and Robak, C., 2020, “Evaluating the Effect of Vane Trailing Edge Flow on Turbine Rim Sealing” Journal of Turbomachinery, doi-org.ezaccess.libraries.psu.edu/10.1115/1.4047611
Snyder, J. C. and Thole, K. A., 2020, “Performance of Public Film Cooling Geometries Produced through Additive Manufacturing” Journal of Turbomachinery, vol. 142(5), pp. 051009.
Snyder, J. C. and Thole, K. A., 2020, “Effect of Additive Manufacturing Process Parameters on Turbine Cooling” Journal of Turbomachinery, vol. 142(5), pp051007.
Siroka, S., Berdanier, R. A., Thole, K. A., Chana, K., Haldeman, C. W., and Anthony, R. J., 2020, “Comparison of Thin Film Heat Flux Gauge Technologies Emphasizing Continuous-Duration Operation,” Journal of Turbomachinery. DOI: https://doi.org/10.1115/1.4045991
Berdanier, R., DeShong, E., Thole, K. A., “Evaluating the Effects of Transient Purge Flow on Stator-Rotor Seal Performance,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-91654, 2019.
Cory, T., Thole, K. A., Kirsch, K., Lundgreen, R., Prenter, R., Kramer, S., “Impact of Dust Feed on Capture Efficiency and Deposition Patterns in a Double-Walled Liner,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-90981.
Hanson, D., McClain, S., Snyder, J., Kunz, R., Thole, K. A., “Flow in a Scaled Turbine Coolant Channel with Roughness due to Additive Manufacturing,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-90931, 2019.
Monge-Concepción, I., Berdanier, R., Barringer, M., Thole, K. A., “Evaluating the Effect of Vane Trailing Edge Flow on Turbine Rim Sealing,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-91576, 2019.
Robak, C., Faghri, A., Thole, K. A., “Analysis of Gas Turbine Rim Cavity Ingestion with Axial Purge Flow Injection,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-91807, 2019.
Siroka, S., Berdanier, R., Thole, K. A., Chana, K., Haldeman, C., Anthony, R., “Comparison of Thin Film Heat-Flux Gauge Technologies Emphasizing Continuous-Duration Operation,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-91817, 2019.
Snyder, J., Thole, K. A., “Effect of Additive Manufacturing Process Parameters on Turbine Cooling,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-90862, 2019.
Snyder, J., Thole, K. A., “Performance of Public Film Cooling Geometries Produced through Additive Manufacturing,” Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA, GT2019-90877, 2019.
Stimpson, C., Snyder, J., Thole, K. A., and Mongillo, D., 2018, “Effects of Coolant Feed Direction on Additively Manufactured Film Cooling Holes” Journal of Turbomachinery, Vol 140 (11), pp. 111001.
Kirsch, K. L. and Thole, K. A., 2018, “Numerical Optimization, Characterization, and Experimental Investigation of Additively Manufactured Communicating Microchannels” Journal of Turbomachinery, Vol. 140 (11), pp. 111003.
Kirsch, K. L. and Thole, K. A., 2018, “Isolating the Effects of Surface Roughness versus Wall Shape in Numerically Optimized, Additively Manufactured Micro Cooling Channels,” Experimental Thermal and Fluid Science, Vol. 98, p. 227-238.
Shrager, A., Thole, K. A., and Mongillo, D., 2018 “Effects of Effusion Cooling Pattern Near the Dilution Hole for a Double-Walled Combustor Liner – Part 1: Overall Effectiveness Measurements”, Journal of Engineering for Gas Turbines and Power, Vol. 141 (1), pp. 011022.
Shrager, A., Thole, K. A., and Mongillo, D., 2018 “Effects of Effusion Cooling Pattern Near the Dilution Hole for a Double-Walled Combustor Liner – Part 2: Flowfield Measurements”, Journal of Engineering for Gas Turbines and Power, Vol. 141 (1), pp. 011023.
Clark, K., Barringer, M., Johnson, D., Thole, K. A., Grover, E., and Robak, C., 2018 “Effects of Purge Flow Configuration on Sealing Effectiveness in a Rotor-Stator Cavity” Journal of Engineering for Gas Turbines and Power, vol. 140(11), pp. 112502.
Town, J., Straub, D. Black, J., Thole, K. A., and Shih, T., 2018 “State-of-the-Art Cooling Technology for a Turbine Rotor Blade,” Journal of Turbomachinery, vol. 140 (7), pp. 071007.
Stimpson, C. K., Snyder, J. C., Thole, K. A., and Mongillo, D., “Effectiveness Measurements of Additively Manufactured Film Cooling Holes,” J. Turbomach. , 140(1), p. 011009., 2017.
Kirsch, K. L., and Thole, K. A., “Experimental Investigation of Numerically Optimized Wavy Microchannels Created Through Additive Manufacturing,” J. Turbomach. , 140(2), p. 021002., 2017
Ferster, K. K., Kirsch, K. L., and Thole, K. A., “Effects of Geometry, Spacing, and Number of Pin Fins in Additively Manufactured Microchannel Pin Fin Arrays,” J. Turbomach. , 140(1), p. 011007., 2017.
Kirsch, K. L. K. L., Snyder, J. C., Stimpson, C. K., Thole, K. A., and Mongillo, D., 2017, “Repeatability in Performance of Micro Cooling Geometries Manufactured with Laser Powder Bed Fusion,” 53rd AIAA/SAE/ASEE Joint Propulsion Conference, Atlanta, GA, pp. 1–14.,”
Lynch SP, Thole KA. Heat Transfer and Film Cooling on a Contoured Blade Endwall With Platform Gap Leakage. J. Turbomach. vol. 139(5), doi:10.1115/1.4035202., 2017.
Kirsch, K.L. and Thole, K.A., 2017, Pressure Loss and Heat Transfer Performance for Additively and Conventionally Manufactured Pin Fin Arrays, International J. of Heat and Mass Transfer, vol. 108(2017), pp. 2502-2513, 2017.
Clark, K., Barringer, M., Thole, K. A., Clum, C,. Hiester, P., Memory, C., Robak, C., “Using a Tracer Gas to Quantify Sealing Effectiveness for Engine Realistic Rim Seals,” International Gas Turbine and Aeroengine Congress and Exposition, Seoul, South Korea, GT2016-58095, 2016.
Clark, K., Barringer, M., Thole, K. A., Clum, C,. Hiester, P., Memory, C., Robak, C., “Effects of Purge Jet Momentum on Sealing Effectiveness,” J. Eng. Gas Turbines Power, vol 139(3), pp. 031904, 2016.
Gibson, J., Thole, K. A., Christophel, J., Memory, C., Praisner, T., “Pressure Distortion Effects on Rim Seal Performance in a Linear Cascade,” International Gas Turbine and Aeroengine Congress and Exposition, Seoul, South Korea, GT2016-58098, 2016.
Kirsch, K.L. and Thole, K.A., “Heat Transfer and Pressure Loss Measurements in Additively Manufactured Wavy Microchannels,” J. Turbomach, vol 139(1), pp. 011007, 2016.
Stimpson, C. K., Snyder, J. C., Thole, K. A., and Mongillo, D., “Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels,” J. Turbomach, vol 139(2), pp. 021003, 2016.
Schroeder, R.P. and Thole, K.A., “Thermal Field Measurements for a Shaped Hole at Low and High Freestream Turbulence Intensity,” J. Turbomach, vol 139(2), pp. 021012, 2016.
Schroeder, R.P. and Thole, K.A., “Effect of In-Hole Roughness on Film Cooling from a Shaped Hole,” J. Turbomach, vol 139(3), pp. 031004, 2016.
Lynch, S., Thole, K. A., 2016, “Comparison of the Three-Dimensional Boundary Layer on Flat Versus Contoured Endwall, J Turbomach, vol. 138, pp 041008.
Schroeder, R.P. and Thole, K.A., “Effect of High Freestream Turbulence on Flowfields of Shaped Film Cooling Holes,” ASME. J. Turbomach. vol 138(9): pp. 091001-091001-10, 2016.
Mensch, A. and Thole, K. A., “Effects of non-axisymmetric endwall contouring and film cooling on the passage flowfield in a linear turbine cascade,” Experiments in Fluids, vol. 57, pp. 1-16, 2016.
Stimpson, C. K., Snyder, J. C., Thole, K. A., and Mongillo, D., “Roughness Effects on Flow and Heat Transfer for Additively Manufactured Channels,” J. Turbomach. 2016;138(5):051008-051008-10. doi:10.1115/1.4032167.
Snyder, J. C., Stimpson, C. K., Thole, K. A., and Mongillo, D., “Build Direction Effects on Additively Manufactured Channels,” J. Turbomach. 2016;138(5):051006-051006-8. doi:10.1115/1.4032168.
Mensch, A. and Thole, K. A., “Simulations of Multiphase Particle Deposition on a Gas Turbine Endwall With Impingement and Film Cooling,” J. Turbomach, vol. 137, pp. 111002-111002-8, 2015.
Mensch, A. and Thole, K. A., “Overall Effectiveness and Flowfield Measurements for an Endwall with Non-Axisymmetric Contouring,” J. Turbomach, vol. 138, pp. 031007, 2015.
Snyder, J. C., Stimpson, C. K., Thole, K. A., Mongillo, D. J. “Build Direction Effects on Microchannel Tolerance and Surface Roughness,” ASME. J. Mech. Des., vol. 137, pp. 2111411-111411-7, 2015.
Mensch, A. and Thole, K. A., “Conjugate Heat Transfer Analysis of the Effects of Impingement Channel Height for a Turbine Blade Endwall,” Int. J. of Heat and Mass Transfer, vol. 82, pp. 66-77, 2015.
Kirsch, K. L. and Thole, K. A., “Heat Transfer Measurements of Oblong Pins,” J Turbomach, vol. 137, pp. 071004, 2014.
Whitfield, C. A., Schroeder, R. P., Thole, K. A., and Lewis, S. D., “Blockage Effects from Simulated Thermal Barrier Coatings for Cylindrical and Shaped Cooling Holes,” J Turbomach, vol. 137, pp. 091004, 2015.
Eberly, M. K. and Thole, K. A., “Time-Resolved Film-Cooling Flows at High and Low Density Ratios,” J Turbomach, vol. 136, pp. 061003, 2014 (2013 Best Paper Award for Gas Turbine Heat Transfer).
Barringer, M., Thole, K. A., Krishnan, V., and Landrum, E., “Manufacturing Influences on Pressure Losses of Channel Fed Holes,” J Turbomach, vol. 136, pp. 051012, 2014.
Kirsch, K. L., Ostanek, J. K., and Thole, K. A., “Comparison of Pin Surface Heat Transfer in Arrays of Oblong and Cylindrical Pin Fins,” J Turbomach, vol. 136, pp. 041015, 2014.
Mensch, A. and Thole, K. A., “Overall Effectiveness of a Blade Endwall with Jet Impingement and Film Cooling,” J Eng Gas Turb Power, vol. 136, pp. 031901, 2014.
Kirsch, K. L., Ostanek, J. K., Thole, K. A., and Kaufman, E., “Row Removal Heat transfer Study for Pin Fin Arrays,” International Gas Turbine and Aeroengine Congress and Exposition, Düsseldorf, Germany, GT2014-25348, 2014.
Barringer, M., Coward, A., Clark, K., Thole, K. A., Schmitz, J., Wagner, J., Alvin, M. A., Burke, P., and Dennis, R., “The Design of a Steady Aero Thermal Research Turbine (START) for Studying Secondary Flow Leakages and Airfoil Heat Transfer,” International Gas Turbine and Aeroengine Congress and Exposition, Düsseldorf, Germany, GT2014-25570, 2014.
Schroeder, R. P. and Thole, K. A., “Adiabatic Effectiveness Measurements for a Baseline Shaped Film Cooling Hole,” International Gas Turbine and Aeroengine Congress and Exposition, Düsseldorf, Germany, GT2014-25992, 2014.
Mensch, A., Thole, K. A., and Craven, B. A., “Conjugate Heat Transfer Measurements and Predictions of a Blade Endwall with a Thermal Barrier Coating,” J Turbomach, vol. 136, pp. 121003, 2014.
Thrift, A. A. and Thole, K. A., “Impact of the Combustor-Turbine Interface Slot Orientation on the Durability of a Nozzle Guide Vane Endwall,” J Turbomach, vol. 135, pp. 041019, 2013.
Lawson, S., Lynch, S., and Thole, K. A., “Simulations of Multi-Phase Particle Deposition on a Nonaxisymmetric Contoured Endwall with Film-Cooling,” J Turbomach, vol. 135, pp. 031032, 2013.
Barringer, M.D., Thole, K. A., Breneman, D. L., Tham, K-M, and Laurello, V., “Effects of Centrifugal Forces on Particle Deposition for a Representative Seal Pin Between Two Blades,” J Eng Gas Turb Power, vol. 135, pp. 032601, 2013.
Musgrove, G. O., Thole, K. A., Grover, E., and Barker, J., “Performance Measurements of a Unique Louver Particle Separator for Gas Turbine Engines,” J Eng Gas Turb Power, vol. 135, pp. 012001, 2013.
Thrift, A. A., Thole, K. A., and Hada, S.,”Effects of Orientation and Position of the Combustor-Turbine Interface Gap on the Cooling of a Vane Endwall,” J Turbomach, vol. 134, pp 061019, 2012.
Thrift, A. A. and Thole, K. A., “Influence of Flow Injection Angle on a Leading-Edge Horseshoe Vortex,” International Journal of Heat and Mass Transfer, vol. 55, pp. 4651-4664, 2012.
Ostanek, J. K. and Thole, K. A., “Effect of streamwise spacing on periodic and random unsteadiness in a bundle of short cylinders confined in a channel,” Experiments in Fluids, vol. 53, pp. 1779-1796, 2012.
Ostanek, J. K. and Thole, K. A., “Wake development in staggered short cylinder arrays within a channel,” Experiments in Fluids, vol. 53, pp. 673-697, 2012.
Lawson, S. A. and Thole, K. A., “Simulations of Multiphase Particle Deposition on Endwall Film-Cooling Holes in Transverse Trenches,” J Turbomach, vol. 134, pp. 051040, 2012.
Ostanek, J. K. and Thole, K. A., “Flowfield Measurements in a Single Row of Low Aspect Ratio Pin Fins,” J Turbomach, vol. 134, pp. 051034, 2012.
Lawson, S. A., Thole, K. A., Okita, Y., and Nakamata, C., “Simulations of Multi-Phase Particle Deposition on a Showerhead With Staggered Film-Cooling Holes,” J Turbomach, vol. 134, pp. 051041, 2012.
Lawson, S. A. and Thole, K. A., “Simulations of Multi-Phase Particle Deposition on Endwall Film-Cooling,” J Turbomach, vol. 134, pp. 011003, 2012.
Cardwell, N., Vlachos, P. and Thole, K. A., “A Multi-Parametric Particle Pairing Algorithm for Particle Tracking in Single and Multiphase Flows,” Science, Measurement & Technology, MST/380473/PAP, 2011.
Weaver, S., Barringer, M., and Thole, K. A., “Micro Channels with Manufacturing Roughness Levels,” J Turbomach, vol. 133, pp. 041014, 2011.
Lawson, S., Thrift, A. A., Thole, K. A., and Kohli, A., “Heat Transfer from Multiple Row Arrays of Low Aspect Ratio Pin Fins,” International Journal of Heat and Mass Transfer, doi:10.1016/j.physletb.2003.10.071, 2011.
Thrift, A. A., Thole, K. A., and Hada, S., “Effects of an Axisymmetric Contoured Endwall on a Nozzle Guide Vane: Adiabatic Effectiveness Measurements,” J Turbomach, vol. 133, pp. 041007, 2011.
Thrift, A. A., Thole, K. A., and Hada, S., “Effects of an Axisymmetric Contoured Endwall on a Nozzle Guide Vane: Heat Transfer Measurements,” J Turbomach, vol. 133, pp. 041008, 2011.
Lynch, S. and Thole, K. A., “The Effect of the Combustor-Turbine Slot and Mid-Passage Gap on Vane Endwall Heat Transfer,” J Turbomach, vol. 133, pp. 041002, 2011.
Lynch, S. P., Thole, K. A., Kohli, A., and Lehane, C., “Computational Predictions of Heat Transfer and Film-Cooling for a Turbine Blade with Non-Axiymmetric Endwall Contouring,” J Turbomach, vol. 133, pp. 041003, 2011.
Cardwell, N. D., Vlachos, P. P., and Thole, K. A., “A Method for Identifying and Visualizing Foreign Particle Motion Using Time Resolved Particle Tracking Velocimetry,” J Turbomach, vol. 133, pp. 021021, 2011.
Lawson, S. A. and Thole, K. A., “Effects of Simulated Particle Deposition on Film Cooling,” J Turbomach, vol. 133, pp. 021009, 2011 (2010 Best Paper Award for Gas Turbine Heat Transfer).
Carullo, J. S., Thole, K. A., Zhang, L. J., Moon, H. K., Nasir, S., Cress, R. D., and Ng, W. F., “The Effects of Freestream Turbulence, Turbulence Length Scale, and Exit Reynolds Number on Turbine Blade Heat Transfer in a Transonic Cascade,” J Turbomach, vol. 133, pp. 011030, 2011.
Hada, S. and Thole, K. A., “Computational Study of a Midpassage Gap and Upstream Slot on Vane Endwall Film-Cooling,” J Turbomach, vol. 133, pp. 011024, 2011.
Lynch, S. P., Sundaram, N., Thole, K. A., Kohli, A., and Lehane, C., “Heat Transfer for a Turbine Blade with Non-Axisymmetric Endwall Contouring,” J Turbomach, vol. 133, 011019, 2011.
Colban, W., Thole, K. A., and Bogard, D., “A Film Cooling Correlation for Shaped Holes on a Flat-Plate Surface,” J Turbomach, vol. 133, pp. 011002, 2011.
Lyall, M. E., Thrift, A. A., Thole, K. A., and Kohli, A., “Heat Transfer from Low Aspect Ratio Pin Fins,” J Turbomach, vol. 133, pp. 011001, 2011.
Cardwell, N. D., Vlachos, P. P., and Thole, K. A., “Developing and Fully Developed Turbulent Flow in Ribbed Channels,” Experiments in Fluids, DOI: 10.1007/s00348-010-0993-y, 2011.
Thrift, A. A., Brumbaugh, S., Thole, K. A., and Kohli, A., “A Methodology to Measure Aerodynamic Forces on Cylinders in Channel Flow,” Journal of Fluids Engineering, vol. 132, pp. 081401, 2010.
Ostanek, J., Thole, K. A., Prausa, J., and Van Suetendael, A., “Establishing a Methodology for Resolving Convective Heat Transfer from Complex Geometries,” J Turbomach, vol. 132, pp. 031014, 2010.
Land, C., Thole, K. A., and Joe, C., “Considerations of a Double-Wall Cooling Design to Reduce Sand Blockage,” J Turbomach, vol. 132, pp. 031011, 2010.
Cardwell, N. D., Burd, S. W., and Thole, K. A., “Investigation of Sand Blocking within Impingement and Film-Cooling Holes,” J Turbomach, vol. 132, pp. 021020, 2010.
Marshall, M., Alley, M., Zappe, S., Thole, K., Frecker, M., and Engel, R., “Ambassador Program for Recruiting Girls into Engineering-Appropriate Messages, Messengers, and Modes of Delivery,” 40th ASEE/IEEE Frontiers in Engineering Conference, T1A, October 27-30, 2010, Washington, DC, 2010.
Barringer, M. D., Thole, K. A., Polanka, M. D., Clark, J. P., and Koch, P. J., “Migration of Combustor Exit Profiles Through High Pressure Turbine Vanes,” J Turbomach, vol. 131, pp. 021010, 2009.
Barringer, M. D., Thole, K. A., and Polanka, M. D., “An Experimental Study of Combustor Exit Profile Shapes on Endwall Heat Transfer in High Pressure Turbine Vanes,” J Turbomach, vol. 131, pp. 021009, 2009.
Barringer, M., Thole, K. A., and Polanka, M. D., “Effects of Combustor Exit Profiles on High Pressure Turbine Vane Aerodynamics and Heat Transfer,” J Turbomach, vol. 131, pp. 021008, 2009.
Nasir, S., Zhang, L. J., Moon, H. K., Carullo, J. S., Ng, W. F., Thole, K. A., and Wu, H., “Effects of Large Scale High Freestream Turbulence and Exit Reynolds Number on Turbine Vane Heat Transfer in a Transonic Cascade,” J Turbomach, vol. 131, pp. 021021, 2009.
Sundaram, N. and Thole, K. A., “Film-Cooling Flowfields with Trenched Holes on an Endwall,” J Turbomach, vol. 131, pp. 041007, 2009.
Musgrove, G. O., Barringer, M. D., Thole, K. A., Grover, E., and Barker, J., “Computational Design of a Louver Particle Separator for Gas Turbine Engines,” International Gas Turbine and Aeroengine Congress and Exposition, Orlando, GT2009-60199, 2009.
Knost, D. G., Thole, K. A., and Duggleby, A., “Evaluating a Three-Dimensional Slot Design for the Combustor-Turbine Interface,” International Gas Turbine and Aeroengine Congress and Exposition, Orlando, GT2009-60168, 2009.
Lawson, M. and Thole, K. A., “Heat Transfer Augmentation along the Tube Wall of a Louvered Fin Heat Exchanger Using Practical Delta Winglets,” International Journal of Heat and Mass Transfer, vol. 51, pp. 2346-2360, 2008.
Colban, W., Thole, K. A., and Haendler, M., “A Comparison of Cylindrical and Fan-Shaped Film-Cooling Holes on a Vane Endwall at Low and High Freestream Turbulence Levels,” J Turbomach, vol. 130, pp. 031007-1–031007-9, 2008.
Sundaram, N., Barringer, M. D., and Thole, K. A., “Effects of Deposits on Film Cooling of a Vane Endwall Along the Pressure Side,” J Turbomach, vol. 130, pp. 0410006, 2008.
Sundaram, N. and Thole, K. A., “Bump and Trench Modifications to Film-Cooling Holes at the Vane Endwall Junction,” J Turbomach, vol. 130, pp. 041013, 2008.
Lynch, S. P. and Thole, K. A., “The Effect of Combustor-Turbine Interface Gap Leakage on the Endwall Heat Transfer for a Nozzle Guide Vane,” J Turbomach, vol. 130, pp. 041019, 2008.
Cardwell, N., Vlachos, P., and Thole, K. A., “Developing and Fully Developed Turbulent Flow in Ribbed Channels,” Fluids Engineering Conference, FEDSM2008-55190, 2008 (nominated for Best Paper).
Colban, W. and Thole, K. A., “Influence of Hole Shape on the Performance of a Turbine Vane Endwall Film-Cooling Scheme,” International Journal of Heat and Fluid Flow, vol. 28, Issue 3, pp. 341-356, 2007.
Barringer, M. D., Thole, K. A., and Polanka, M. D., “Experimental Evaluation of an Inlet Profile Generator for High-Pressure Turbine Tests,” J Turbomach, vol. 129, pp. 23-31, 2007.
Colban, W., Thole, K. A., and Haendler, M., “Experimental and Computational Comparisons of Fan-Shaped Film-Cooling on a Turbine Vane Surface,” J Turbomach, vol. 129, pp. 23-31, 2007.
Scrittore, J., Thole, K. A., and Burd, S., Investigation of Velocity Profiles for Effusion Cooling of Combustor Liners,” J Turbomach, vol. 129, pp. 518-526, 2007.
Sundaram, N. and Thole, K. A., “Effects of Surface Deposition, Hole Blockage, and TBC Spallation on Vane Endwall Film-Cooling,” J Turbomach, vol. 129, pp. 599-607, 2007.
Cardwell, N., Sundaram, N., and Thole, K. A., “The Effects of Varying the Combustor-Turbine Gap,” J Turbomach, vol. 129, pp. 756-764, 2007.
Bogard, D. G. and Thole, K. A., “Gas Turbine Film Cooling,” AIAA Journal of Propulsion and Power, vol. 22, pp. 249-271, 2006.
Sewall, E. A., Tafti, D. K., Graham, A., and Thole, K. A., “Experimental Validation of Large Eddy Simulations of Flow and Heat Transfer in a Stationary Ribbed Duct,” International Journal of Heat and Fluid Flow, vol. 27, Issue 2, pp. 243-258, 2006.
Sanders, P. and Thole, K. A., “Effects of Winglets to Augment Tube Wall Heat Transfer in Louvered Fin Heat Exchangers,” International Journal of Heat and Mass Transfer, vol. 49, Issue 21-22, pp. 4058-4069, 2006.
Cardwell, N., Sundaram, N., and Thole, K. A., “Effect of Midpassage Gap, Endwall Misalignment, and Roughness on Endwall Film-Cooling,” J Turbomach, vol. 128, pp. 62-70, 2006.
Colban, W., Gratton, A., Thole, K. A., and Haendler, M., “Heat Transfer and Film-Cooling Measurements on a Stator Vane with Fan-Shaped Cooling Holes,” J Turbomach, vol. 128, pp. 53-61, 2006.
Walsh, W. S., Thole, K. A., and Joe, C., “Effects of Sand Ingestion on the Blockage of Film-Cooling Holes,” International Gas Turbine and Aeroengine Congress and Exposition, Barcelona, Spain, ASME Paper GT2006-90067, 2006.
Couch, E., Christophel, J. S., Hohlfeld, E., Thole, K. A., and Cunha, F., “Comparison of Measurements and Predictions for Blowing from the Tip of a Turbine Blade,” AIAA Journal of Propulsion and Power, vol. 21, no. 2, pp. 335-343, 2005.
Stephan, R. and Thole, K. A., “Optimization Study Relevant to Louvered Fin Compact Heat Exchangers,” International Journal of Compact Heat Exchangers, vol. VI, no. 1, pp. 73-92, 2005.
Thole, K. A. and Knost, D., “Heat Transfer and Film-Cooling for the Endwall of a First Stage Turbine Vane,” International Journal of Heat and Mass Transfer, vol. 48, issues 25-26, pp. 5255-5269, 2005.
Hohlfeld, E., Couch, E., Christophel, J., and Thole, K. A., “Predictions of Cooling from Dirt Purge Holes Along the Tip of a Turbine Blade,” International Journal of Turbo and Jet Engines, vol. 22, pp. 139-152, 2005.
Knost, D. and Thole, K. A., “Computational Predictions of Endwall Film-Cooling for a First Stage Vane,” International Journal of Turbo and Jet Engines, vol. 22, pp. 41-58, 2005.
Knost, D. G. and Thole, K. A., “Adiabatic Effectiveness Measurements of Endwall Film-Cooling for a First Stage Vane,” J Turbomach, vol. 127, pp.297-305, 2005.
Christophel, J. R., Couch, E., Thole, K. A., and Cunha, F., “Measured Adiabatic Effectiveness and Heat Transfer for Blowing from the Tip of a Turbine Blade,” J Turbomach, vol. 127, pp. 251-262, 2005.
Christophel, J. R., Thole, K. A., and Cunha, F., “Cooling the Tip of a Turbine Blade Using Pressure Side Holes-Part 1: Film Effectiveness Measurements,” J Turbomach, vol. 127, pp. 270-277, 2005.
Christophel, J. R., Thole, K. A., and Cunha, F., “Cooling the Tip of a Turbine Blade Using Pressure Side Holes-Part 2: Heat Transfer Measurements,” J Turbomach, vol. 127, pp. 278-286, 2005.
Ranson, W., Thole, K. A., and Cunha, F., “Adiabatic Effectiveness Measurements and Predictions of Leakage Flows along a Blade Endwall,” J Turbomach, vol. 127, pp. 609-618, 2005.
Vakil, S. and Thole, K. A., “Flow and Thermal Field Measurements in a Combustor Simulator Relevant to a Gas Turbine Aero-Engine,” J Eng Gas Turb Power, vol. 127, pp. 257-267, 2005.
Pang, Y., Scott, E. P., Chen, J. Z., and Thole, K. A., “Electrical and Thermal Layout Design and Optimization Considerations for DPS Active IPEM,” Journal of Electronic Packaging, vol. 127, pp. 59-66, 2005.
Kunze, V. R., Wolff, M., Barringer, M. D., Thole, K. A., and Polanka, M. D., “Numerical Modeling of Flow and Thermal Properties Within a Combustor Simulator,” International Gas Turbine and Aeroengine Congress and Exposition, Reno, Nevada, ASME Paper GT-2005-68284, 2005.
Scrittore, J. J. and Thole, K. A., “Experimental Characterization of Film-Colling Effectiveness near Combustion Dilution Holes,” Proceedings ASME Turbo Expo, Reno, Nevada, ASME Paper GT-2005-68704, 2005.
Lethander, A., and Thole, K. A., “Optimizing the Vane-Endwall Junction to Reduce Adiabatic Wall Temperatures in a Turbine Vane Passage,” AIAA Journal of Propulsion and Power, vol. 20, pp. 1105-1116, 2004.
Ebeling, C. and Thole, K. A., “Measurements and Predictions of the Heat Transfer at the Tube-Fin Junction for Louvered Fin Exchangers,” International Journal of Compact Heat Exchangers, vol. V, pp. 265-286, 2004.
Stitzel, S. and Thole, K. A., “Flow Field Computations of Combustor-Turbine Interactions Relevant to a Gas Turbine Engine,” J Turbomach, vol. 126, pp. 122-129, 2004.
Graham, A., Sewall, E., and Thole, K. A., “Flowfield Measurements in a Ribbed Channel Relevant to Internal Turbine Blade Cooling, International Gas Turbine and Aeroengine Congress and Exposition, Vienna, Austria, ASME Paper GT-2004-53361, 2004.
Barringer, M. D., Thole, K. A. and Polanka, M. D., “Developing a Combustor Simulator for Investigating High Pressure Turbine Aerodynamics and Heat Transfer, International Gas Turbine and Aeroengine Congress and Exposition, Vienna, Austria, ASME Paper GT-2004-53613, 2004.
Knost, D. and Thole, K. A., “Adiabatic Effectiveness Measurements of Endwall Film-Cooling for a First Stage Vane, International Gas Turbine and Aeroengine Congress and Exposition, Vienna, Austria, ASME Paper GT-2004-53326, 2004.
Hohlfeld, E., Couch, E., Christophel, J., and Thole, K. A., “Predictions of Cooling from Dirt Purge Holes Along the Tip of a Turbine Blade,” International Gas Turbine and Aeroengine Congress and Exposition, Atlanta, Georgia, ASME Paper GT-2003-38251, 2003.
Lethander, A., Thole, K. A., Zess, G., and Wagner, J., “Optimizing the Vane-Endwall Junction to Reduce Adiabatic Wall Temperatures in a Turbine Vane Passage,” International Gas Turbine and Aeroengine Congress and Exposition, Atlanta, Georgia, ASME Paper GT-2003-38940, 2003.
Vakil, S. and Thole, K. A., “Flow and Thermal Field Measurements in a Combustor Simulator Relevant to a Gas Turbine Aero-Engine,” International Gas Turbine and Aeroengine Congress and Exposition, Atlanta, Georgia, ASME Paper GT-2003-38254, 2003.
Lyman, A. C., Stephan, R. A., Thole, K. A., Zhang, L., and Memory, S., “Scaling of Heat Transfer Coefficients Along Louvered Fins,” Experimental Thermal Fluid Science, vol. 26, no. 5, pp. 547-563, 2002.
Thole, K. A., Radomsky, R., Kang, B., and Kohli, A., “Elevated Freestream Turbulence Effects on Heat Transfer for a Gas Turbine Vane,” International Journal of Heat and Fluid Flow, vol. 23, pp. 137-147, 2002.
Radomsky, R. and Thole, K. A., “Detailed Boundary Layer Measurements on a Turbine Stator Vane at Elevated Freestream Turbulence Levels,” J Turbomach, vol. 124, pp. 107-118, 2002.
Zess, G. A. and Thole, K. A., “Computational Design and Experimental Evaluation of Using a Leading Edge Fillet on a Gas Turbine Vane,” J Turbomach, vol. 124, no. 2, pp. 167-175, 2002.
Barringer, M. D., Richard, O. T., Walter, J. P., Stitzel, S. M., and Thole, K. A., “Flow Field Simulations of a Gas Turbine Combustor,” J Turbomach, vol. 124, pp. 508-516, 2002.
Hermanson, K. and Thole, K. A., “Effect on Non-Uniform Inlet Conditions on Endwall Secondary Flows,” J Turbomach, vol. 124, pp. 623-631, 2002.
Colban, W. F., Thole, K. A., and Zess, G., “Combustor-Turbine Interface Studies: Part 1: Endwall Measurements,” J Turbomach, vol. 125, pp. 193-202, 2002.
Colban, W. F., Lethander, A. T., Thole, K. A., and Zess, G., “Combustor-Turbine Interface Studies: Part 2: Flow and Thermal Field Measurements,” J Turbomach, vol. 125, pp. 203-209, 2002.
Nix, A., Smith, A., Diller, T., Ng, W., and Thole, K. A., “High Intensity, Large Length-Scale Freestream Turbulence Generation in a Transonic Turbine Cascade,” International Gas Turbine and Aeroengine Congress and Exposition, Amsterdam, The Netherlands, ASME Paper 2002-GT-30523, 2002.
Pang, Y. F., Chen, J. Z., Scott, E. P., and Thole, K. A., “Electrical and Thermal Layout Design and Optimization Considerations for DPS Active IPEM,” New Orleans, Louisiana, IMECE2002-33778, 2002.
Harrington, M., McWaters, M., Bogard, D., Lemmon, C., and Thole, K. A., “Full-Coverage Film Cooling with Short Normal Injection Holes,” J Turbomach, vol. 123, pp. 798-805, 2001.
Thole, K. A., Radomsky, R., Kang, B., and Kohli, A., “Elevated Freestream Turbulence Effects on Heat Transfer for a Gas Turbine Vane,” Turbulent Heat Transfer Conference, Anchorage, Alaska, March, 2001.
Hermanson, K. and Thole, K. A., “Effect of Mach Number on Secondary Flow Characteristics,” International Journal of Turbo Jet Engines, vol. 17, pp. 179-196, 2000.
Radomsky, R. and Thole, K. A., “Flowfield Measurements for a Highly Turbulent Flow in a Stator Van Passage,” J Turbomach, vol. 122, no. 2, pp. 255-262, 2000.
Kang, M. and Thole, K. A., “Flowfield Measurements in the Endwall Region of a Stator Vane,” J Turbomach, vol. 122, pp. 458-466, 2000.
Radomsky, R. and Thole, K. A., “High Freestream Turbulence Effects in the Endwall Leading Edge Region,” J Turbomach, vol. 122, pp. 699-708, 2000.
Radomsky, R. and Thole, K. A., “Measurements and Predictions of a Highly Turbulent Flowfield in a Turbine Vane Passage,” Journal of Fluids Engineering, vol. 122, pp. 666-676, 2000.
Hermanson, K. and Thole, K. A., “Effect of Inlet Profiles on Endwall Secondary Flows,” Journal of Propulsion and Power, vol. 16, no. 2, pp. 286-296, 2000.
Springer, M. E. and Thole, K. A., “Entry Region of Louvered Fin Heat Exchangers,” Experimental Thermal and Fluid Science, vol. 19, pp. 223-232, 1999.
Kang, M., Kohli, A., and Thole, K. A., “Heat Transfer and Flowfield Measurements in the Leading Edge Region of a Stator Vane Endwall,” J Turbomach, vol. 121, pp. 558-568, 1999.
Lemmon, C., Kohli, A., and Thole, K. A., “Formation of Counter-Rotating Vortices in Film-Cooling Flows,” International Gas Turbine and Aeroengine Congress and Exposition, Indianapolis, Indiana, ASME Paper 99-GT-161, 1999.
Hermanson, K. and Thole, K. A., “Effect of Inlet Conditions on Endwall Secondary Flows,” AIAA Aerospace Meeting, Reno, Nevada, AIAA Paper 99-0241, 1999.
Zhang, L. W., Memory, S. B., Wattelet, J. P., Springer, M. E., and Thole, K. A., “A Combined Experimental and Computational Study of Flowfields in a Louvered Fin Heat Exchanger,” VTMS 4, ICE, London, United Kingdom, 1999.
Springer, M. and Thole, K. A., “Experimental Design for Flowfield Studies of Louvered Fins,” Experimental Thermal and Fluid Science, vol. 18, no. 3, pp. 258-269, 1998.
Thole, K. A., Gritsch, M., Schulz, A., and Wittig, S., “Flowfield Measurements for Cooling Holes with Expanded Exits,” J Turbomach, vol. 120, no. 2, pp. 327-336, 1998.
Radomsky, R. W. and Thole, K. A., “Effects Of High Freestream Turbulence Levels and Length Scales on Stator Vane Heat Transfer,” International Gas Turbine and Aeroengine Congress and Exposition, Stockholm, Sweden, ASME Paper 98-GT-236, 1998.
Kang, M., Kohli, A., and Thole, K. A., “Heat Transfer and Flowfield Measurements in the Leading Edge Region of a Stator Vane Endwall,” International Gas Turbine and Aeroengine Congress and Exposition, Stockholm, Sweden, ASME Paper 98-GT-173, 1998.
Kohli, A. and Thole, K. A., Entrance Effects on a Diffused Film-Cooling Hole,” International Gas Turbine and Aeroengine Congress and Exposition, Stockholm, Sweden, ASME Paper 98-GT-402, 1998.
Springer, M. and Thole, K. A., Zhang, L. W., Memory, S. B., and Wattelet, J. P., Modine Manufacturing, “A Combined CFD and LDV Study of Flowfields in Louvered Fin Heat Exchangers,” ASME Fluids Engineering Division Meeting, Paper Number FEDSM98-4843, 1998.
Thole, K. A., Gritsch, M., Schulz, A., and Wittig, S., “Effects of a Crossflow at the Entrance to a Film-Cooling Hole,” Journal of Fluids Engineering, vol. 119, no. 3, pp. 533-540, 1997.
Bangert, B., Kohli, A., Sauer, J., and Thole, K. A., “High Freestream Turbulence Simulation in a Scaled-Up Turbine Vane Passage,” International Gas Turbine and Aeroengine Congress and Exposition, Orlando, Florida, ASME Paper 97-GT-51, 1997.
Martin, C. and Thole, K. A., “A CFD Benchmark Study: Leading Edge Film Cooling with Compound Angle Injection,” International Gas Turbine and Aeroengine Congress and Exposition, Orlando, Florida, ASME Paper 97-GT-297, 1997.
Kohli, A. and Thole, K. A., “A CFD Investigation on the Effect of Entrance Flow Conditions in Discrete Film Cooling Holes,” 32nd National Heat Transfer Conference, vol. 12, pp. 223-232 (W. M. Rohsenow Prize for Best Presentation for the Gas Turbine Heat Transfer Committee), 1997.
Thole, K. A. and Bogard, D. G., “High Freestream Turbulence Effects on Turbulent Boundary Layers,” Journal of Fluids Engineering, vol. 118, no. 2, pp. 276-284, 1996.
Wittig, S., Schulz, A., Gritsch, M., and Thole, K. A., “Transonic Film Cooling Investigations: Effects of Hole Shapes and Orientations,” International Gas Turbine and Aeroengine Congress and Exposition, Birmingham, England, ASME Paper 96-GT-222, 1996.
Thole, K. A. and Bogard, D. G., “Enhanced Heat Transfer and Skin Friction Due to High Freestream Turbulence,” J Turbomach, vol. 117, no. 3, pp. 418-424, 1995.
Laudon, M. F., Thole, K. A., Englestad, R. L., Resnick, D. J., Cummings, K. D., and Dauksher, W. J., “Thermal Analysis of X-ray Membrane in a Plasma Environment,” Journal of Vacuum Science Technology B, vol. 13, no. 6, pp. 3050-3054, 1995.
Laudon, M. F., Engelstad, R. L., Thole, K. A., Dauksher, W. J., Resnick, D. J., Cummings, K. D., Seese, P,. and Johnson, W., “Modeling of In-Plane Distortions Due to Variations in Absorber Stress,” International Micro- and Nano- Engineering, Aix-en-Provence, France, 1995.
Laudon, M. F., Thole, K. A., Engelstad, R. L., Resnick, D. J., Cummings, K. D., and Dauksher, W. J., “Thermal Analysis of X-ray Membrane in a Plasma Environment,” 39th International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication, Phoenix, Arizona, 1995.
Thole, K. A., Bogard, D. G., and Whan-Tong, J., “Generating High Freestream Turbulence Levels,” Experiments in Fluids, vol. 17, pp. 375-380, 1994.
Thole, K. A. and Bogard, D. G., “A Technique for Simultaneous Temperature and Velocity Measurements,” Measurement Science and Technology, vol. 5, pp. 435-439, 1994.
Thole, K. A., Whan-Tong, J., and Bogard, D. G., “Generation of Very High Freestream Turbulence Levels and the Effects on Heat Transfer,” Turbulent Shear Flow Conference, 27.5.1-27.5.7, Munich, Germany, 1991.
Thole, K. A., Sinha, A., Bogard, D. G., and Crawford, M. E., “Mean Temperature Measurements of Jets with a Crossflow for Gas Turbine Film Cooling Application,” Rotating Machinery Transport Phenomena, J. H. Kim and W. J. Yang, ed. Hemisphere Publishing Corporation, New York, New York, 1990.
ExCCL Publications:
Elahi, S. S., Moul, Z. K., Lange, E. A., and Lynch, S. P., “Unsteady Heat Flux Measurements of Junction Flow With Reynolds Number and Freestream Turbulence Effects,” American Institute of Aeronautics and Astronautics
Haydt, S., Lynch, S. P., and Lewis S., “The Effect of Area Ratio Change Via Increased Hole Length for Shaped Film Cooling Holes with Constant Expansion Angles,” J. Turbomach. , 140(5), p. 051002, 2018.
Lange, E. A., Elahi, S. S., and Lynch, S. P., “Time-resolved PIV Measurements of the Effect of Freestream Turbulence on Horshoe Vortex Dynamics,” American Institute of Aeronautics and Astronautics.
Saltzman, D., Bichnevicius, M., Lynch, S. P., Simpson, T. W., Reutzel, E. W., Dickman, C., and Martukanitz, R., “Experimental Comparison of a Traditionally Built versus Additively Manufactured Aircraft Heat Exchanger,” American Institute of Aeronautics and Astronautics.
Muirhead, K. and Lynch, S. P., “A Computational Study of Combustor Dilution Flow Interaction with Turbine Vanes,” American Institute of Aeronautics and Astronautics.
Leonetti, M., Lynch, S. P., O’Connor, J., and Bradshaw S., “Combustor Dilution Hole Placement and Its Effect on the Turbine Inlet Flowfield,” Journal of Propulsion and Power , vol. 33, no. 3, pp. 750-763, 2017.
Haydt, S., Lynch, S. P., and Lewis S., “The Effect of a Meter-Diffuser Offset on Shaped Film Cooling Hole Adiabatic Effectiveness,” J. Turbomach. , 139(9), p. 091012, 2017.
Haydt, S., Lynch, S. P., and Lewis S., “The Effect of Area Ratio Change Via Increased Hole Length for Shaped Film Cooling Holes with Constant Expansion Angles,” Conference Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, S. C., GT2017-63692.
Elahi, S. S., Lange, E. A., and Lynch S. P., “Experimental Measurements of Turbulent Junction Flow Using High Speed Stereo PIV and IR Thermography,” American Institute of Aeronautics and Astronautics.
Lynch, S. P., “Three-Dimensional Boundary Layer in a Turbine Blade Passage,” Journal of Propulsion and Power, vol. 33, No. 4, pp. 954-963, 2017.
Siroka, S., Shallcross, M., Lynch, S. P., 2016, “Unsteady Heat Transfer Around Low Aspect Ratio Cylinders in an Array,” ASME paper IMECE2016-66783, Conference proceedings of the 2016 ASME International Mechanical Engineering Congress and Expo, Phoenix, Arizona, USA.
Lynch, S. P., 2016, “Measurements and Predictions of the Three-Dimensional Boundary Layer in a Turbine Blade Passage,” AIAA paper 2016-1891, Conference Proceedings of the 2016 AIAA SciTech Conference, San Diego, CA, USA.
Anderson, C. D., Lynch, S. P., “Time-resolved stereo PIV measurements of the horseshow vortex system at multiple locations in a low-aspect pin-fin array,” Experiments in Fluids, vol. 57, pp. 1-18, 2016.
Lange, E., Lynch, S. P., Lewis, S., “Computational and Experimental Studies of Midpassage Gap Leakage and Misalignment for a Non-Axisymmetric Contoured Turbine Blade Endwall,” ASME paper GT2016-56128, Conference Proceedings of the 2016 ASME IGTI Turbo Expo, Seoul, South Korea.
Haydt, S., Lynch, S. P., Lewis, S., “The Effect of Meter-Diffuser Offset on Shaped Film Cooling Hole Adiabatic Effectiveness,” ASME paper GT2016-56135, Conference Proceedings of the 2016 ASME IGTI Turbo Expo, Seoul, South Korea.
Anderson, C., Lynch, S., 2015, “Time Resolved Stereo-PIV Measurements of the Horseshoe Vortex System in a Low Aspect Ratio Pin-Fin Array,” AIAA paper 2015-3373, Conference Proceedings of the 2015 AIAA Propulsion and Energy Conference, Orlando, FL USA.
Lynch, S. P., Thole, K.A., 2015, “Comparison of the Three-Dimensional Boundary Layer on Flat versus Contoured Turbine Endwalls,” ASME paper GT2015-43298, Conference Proceedings of the 2015 ASME IGTI Turbo Expo, Montreal, Canada.
Milanovic, I., Whiton, J., Florea, R., Lynch, S., Tillman, G., Stucky, M., 2014, “RANS Simulations for Sensitivity Analysis of Compressor Transition Duct,” AIAA paper 2014-3631, Conference Proceedings of the 2014 AIAA Propulsion and Energy Conference, Cleveland, OH USA.
Lawson, S. A., Lynch, S. P., and Thole, K.A., 2013, “Simulations of Multi-Phase Particle Deposition on a Non-Axisymmetric Contoured Endwall with Film Cooling,” ASME J. of Turbomachinery, Vol. 135, pp. 031032-1-11.
Lynch, S. P., Thole, K.A., Kohli, A., Lehane, C., and Praisner, T., 2013, “Endwall Heat Transfer for a Turbine Blade with an Upstream Cavity and Rim Seal Leakage,” ASME paper GT2013-94942, Conference Proceedings of the 2013 ASME IGTI Turbo Expo, San Antonio, TX USA.
Lynch, S. P., Thole, K.A., Kohli, A., Lehane, C., and Praisner, T., 2013, “Aerodynamic Loss for a Turbine Blade with Endwall Leakage Features and Contouring,” 2013, ASME paper GT2013-94943, Conference Proceedings of the 2013 ASME IGTI Turbo Expo, San Antonio, TX USA.
Lawson, S. A., Lynch, S. P., and Thole, K.A., 2012, “Simulations of Multi-Phase Particle Deposition on a Non-Axisymmetric Contoured Endwall with Film Cooling,” ASME paper GT2012-68174, Conference Proceedings of the 2012 ASME IGTI Turbo Expo, Copenhagen, Denmark.
Lynch, S. P., Thole, K. A., Kohli, A., and Lehane, C., “Computational Predictions of Heat Transfer and Film-Cooling for a Turbine Blade with Non-Axisymmetric Endwall Contouring,” J Turbomach, vol. 133, pp. 041003, 2011.
Lynch, S. P., Sundaram, N., Thole, K. A., Kohli, A., and Lehane, C., “Heat Transfer for a Turbine Blade with Non-Axisymmetric Endwall Contouring,” J Turbomach, vol. 133, 011019, 2011.
Lynch, S. P. and Thole, K. A., 2011, “The Effect of the Combustor-Turbine Slot and Mid-Passage Gap on Vane Endwall Heat Transfer,” ASME J. of Turbomachinery, Vol. 133, pp. 041002-1-9.
Lynch, S. P., Thole, K. A., Kohli, A., and Lehane, C., 2010, “Computational Predictions of Heat Transfer and Film Cooling for a Turbine Blade with Non-Axisymmetric Endwall Contouring,” ASME paper GT2010-22984, Conference Proceedings of the 2010 ASME IGTI Turbo Expo, Glasgow, Scotland.
Lynch, S. P., Narayan, S., Thole, K. A., Kohli, A., and Lehane, C., 2009, “Heat Transfer for a Turbine Blade with Non-Axisymmetric Endwall Contouring,” ASME paper GT2009-60185, Conference Proceedings of the 2009 ASME IGTI Turbo Expo, Orlando, Florida, USA.
Lynch, S. P. and Thole, K. A., 2009, “The Effect of the Combustor-Turbine Slot and Mid-Passage Gap on Vane Endwall Heat Transfer,” ASME paper IMECE2009-12847, Conference Proceedings of the 2009 ASME International Mechanical Engineering Congress and Expo, Orlando, Florida, USA.
Lynch, S. P. and Thole, K. A., “The Effect of Combustor-Turbine Interface Gap Leakage on the Endwall Heat Transfer for a Nozzle Guide Vane,” J Turbomach, vol. 130, pp. 041019, 2008.
Lynch, S. P. and Thole, K. A., 2007, “The Effect of Combustor-Turbine Interface Gap Leakage on the Endwall Heat Transfer for a Nozzle Guide Vane,” ASME paper GT2007-27867, Conference Proceedings of the 2007 ASME IGTI Turbo Expo, Montreal, Canada.
